From: Duncan Sands <baldrick@wanadoo.fr>
To: alan@redhat.com
Cc: linux-kernel@vger.kernel.org
Subject: 2.5 BK boot hang after ide
Date: Sun, 23 Mar 2003 14:44:21 +0100 [thread overview]
Message-ID: <200303231444.22191.baldrick@wanadoo.fr> (raw)
Copied down by hand:
...
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
ACPI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
VP_IDE: Chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt 8235 (rev 00) IDE UDMA 133 controller on pci00:11.1
ide0: BM_DMA at 0xfc00-0xfc07, BIOS settings: hda: DMA, hdb: DMA
ide1: BM_DMA at 0xfc08-0xfc0f, BIOS settings: hdc: DMA, hdd: DMA
hda: ST320423A, ATA DISK drive
hdb: Maxtor 6E030L0, ATA DISK drive
id0 at 0x1f0-0x1f7, 0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-MI402, ATAPI CD/DVD-ROM drive
hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177, 0x376 on irq 15
hda: host protected area => 1
hda : 40011300 sectors (20486 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
hda: hda1 hda2 hda3
hdb: host protected area => 1
hdb : 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(133)
hdb: hdb1
(hangs)
At this point in 2.4 the USB subsystem starts up, so it could be a problem there
of course.
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:07.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:0a.0 USB Controller: VIA Technologies, Inc. USB (rev 04)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
All the best,
Duncan.
next reply other threads:[~2003-03-23 13:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-23 13:44 Duncan Sands [this message]
2003-03-23 14:31 Felipe Alfaro Solana
2003-03-23 14:34 ` Duncan Sands
2003-03-23 15:48 ` Nicholas Wourms
2003-03-24 9:38 ` Duncan Sands
2003-03-24 13:16 ` Felipe Alfaro Solana
2003-03-23 14:49 Felipe Alfaro Solana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200303231444.22191.baldrick@wanadoo.fr \
--to=baldrick@wanadoo.fr \
--cc=alan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®