From: Ducrot Bruno <poup@poupinou.org>
To: Gerassimo Tselentis <g_tselentis@worldonline.co.za>
Cc: linux-kernel@vger.kernel.org, ducrot@poupinou.org
Subject: Re: cpufreq not supported on ALi / ATI chipset
Date: Mon, 7 Apr 2003 12:21:57 +0200 [thread overview]
Message-ID: <20030407102157.GD10453@poup.poupinou.org> (raw)
In-Reply-To: <1049312788.2048.51.camel@goku.asylum>
On Wed, Apr 02, 2003 at 09:46:30PM +0200, Gerassimo Tselentis wrote:
> Hi
>
> I see someone posted a message about cpufreq not being supported on an
> Intel 440BX motherboard so I thought I'd post mine too. I have a Compaq
> Evo N1050v laptop with a combination of ALi and ATI bridges. It has an
> Intel Pentium 4-M 1.8GHz I'm not sure which is which, but here is an
> lspci :
>
> 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab2 (rev 02)
> 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 7010
> 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
> 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
> Controller Audio Device (rev 02)
> 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
> 00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem]
> 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
> 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
> IEEE-1394a-2000 Controller (PHY/Link)
> 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
> 00:11.0 Bridge: ALi Corporation M7101 PMU
> 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815
> (MacPhyter) Ethernet Controller
> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M
>
> Also, here is the relevant dmesg output :
>
> ...
> cpufreq: Intel(R) SpeedStep(TM) support $Revision: 1.7.2.6 $
> cpufreq: Intel(R) SpeedStep(TM) for this processor not (yet) available.
> ...
>
> I've also tried the 2.5.65 kernel release. The above was from a
> 2.4.21-0.13mdk kernel. The ATI bridge itself is not supported, as I
> gathered, so maybe that's why and maybe I should rather address this
> email to a different development group instead of cpufreq. I'd gladly
> provide more verbose info if wanted.
>
cpufreq mailing list is the right place to ask for help.
I doubt also that 2.4 series could help you (yet).
You may want to subscribe to cpufreq mailing-list.
In short, there is for now only experimental support for the ALi
southbridge, but is not included in cpufreq 'vanilla' due to
the fact that there is not enough testers.
Cheers,
--
Ducrot Bruno
http://www.poupinou.org Page profaissionelle
http://toto.tu-me-saoules.com Haume page
prev parent reply other threads:[~2003-04-07 10:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-02 19:46 Gerassimo Tselentis
2003-04-07 10:21 ` Ducrot Bruno [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030407102157.GD10453@poup.poupinou.org \
--to=poup@poupinou.org \
--cc=ducrot@poupinou.org \
--cc=g_tselentis@worldonline.co.za \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®