From: jlb@visi.com (Joel L. Breazeale)
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: ioctl() I_SETSIG S_INPUT option fails on a FIFO
Date: Mon, 14 Apr 2003 15:37:33 -0500 (CDT) [thread overview]
Message-ID: <20030414203733.F21A576CA2@isis.visi.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 10830 bytes --]
[1.] One line summary of the problem:
ioctl() I_SETSIG S_INPUT option fails on a FIFO
[2.] Full description of the problem/report:
I have created a FIFO, attempted to create a signal handler for SIGPOLL, then do an I_SETSIG ioctl() call with the S_INPUT option to causing the signal handler to be called when a data is ready on the given file descriptor. The ioctl() fails with an error 22.
[3.] Keywords (i.e., modules, networking, kernel):
kernel, fifo
[4.] Kernel version (from /proc/version):
Linux version 2.4.18-3 (bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18 07:37:53 EDT 2002
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
Using my test application (attached): ioctl call failed for I_SETSIG startup: Invalid argument
[6.] A small shell script or example program which triggers the problem (if possible)
See sender.c and receiver.c in the attached file testapp.tar.Z. Compile sender.c and receiver.c. Run sender first. Run receiver in a separate shell. You should see the error.
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux jbreazealeli 2.4.18-3 #1 Thu Apr 18 07:37:53 EDT 2002 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.14
e2fsprogs 1.27
reiserfsprogs 3.x.0j
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded nls_iso8859-1 sr_mod i810_audio ac97_codec soundcore agpgart binfmt_misc autofs nfs lockd sunrpc eepro100 ide-scsi scsi_mod ide-cd cdrom usb-uhci usbcore ext3 jbd
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 996.782
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1985.74
[7.3.] Module information (from /proc/modules):
nls_iso8859-1 3488 1 (autoclean)
sr_mod 16920 2 (autoclean)
i810_audio 23008 0 (autoclean)
ac97_codec 11904 0 (autoclean) [i810_audio]
soundcore 6692 2 (autoclean) [i810_audio]
agpgart 39488 4 (autoclean)
binfmt_misc 7556 1
autofs 12164 0 (autoclean) (unused)
nfs 86108 5 (autoclean)
lockd 56736 1 (autoclean) [nfs]
sunrpc 75764 1 (autoclean) [nfs lockd]
eepro100 20336 1
ide-scsi 9664 1
scsi_mod 108608 2 [sr_mod ide-scsi]
ide-cd 30272 0
cdrom 32192 0 [sr_mod ide-cd]
usb-uhci 24484 0 (unused)
usbcore 73152 1 [usb-uhci]
ext3 67136 4
jbd 49400 4 [ext3]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
d000-dfff : PCI Bus #01
df00-df3f : Intel Corp. 82820 (ICH2) Chipset Ethernet Controller
df00-df3f : eepro100
e800-e8ff : Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Audio Controller
e800-e8ff : Intel ICH2
ef00-ef3f : Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Audio Controller
ef00-ef3f : Intel ICH2
ef40-ef5f : Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A)
ef40-ef5f : usb-uhci
ef80-ef9f : Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B)
ef80-ef9f : usb-uhci
efa0-efaf : Intel Corp. 82820 820 (Camino 2) Chipset SMBus
ffa0-ffaf : Intel Corp. 82820 820 (Camino 2) Chipset IDE U100
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cd7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0febffff : System RAM
00100000-00217cb0 : Kernel code
00217cb1-002d9b3f : Kernel data
0fec0000-0fef7fff : ACPI Tables
0fef8000-0fefffff : ACPI Non-volatile Storage
f6a00000-f6afffff : PCI Bus #01
f8000000-fbffffff : Intel Corp. 82815 CGC [Chipset Graphics Controller]
ff800000-ff8fffff : PCI Bus #01
ff8ff000-ff8fffff : Intel Corp. 82820 (ICH2) Chipset Ethernet Controller
ff8ff000-ff8fffff : eepro100
ffa80000-ffafffff : Intel Corp. 82815 CGC [Chipset Graphics Controller]
ffb80000-ffbfffff : reserved
fff00000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [88] #09 [f104]
00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: f6a00000-f6afffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at ffa0 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at ef40 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 02)
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at efa0 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at ef80 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 02)
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ef00 [size=64]
01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 01)
Subsystem: Intel Corp.: Unknown device 3013
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at df00 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TEAC Model: CD-540E Rev: 1.0A
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):
None.
[X.] Other notes, patches, fixes, workarounds:
I have tried this on RedHat 9.0 (kernel version 2.4.20-9) and still see the problem.
[-- Attachment #2: testapp.tar.Z --]
[-- Type: application/x-compress, Size: 2026 bytes --]
reply other threads:[~2003-04-14 20:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030414203733.F21A576CA2@isis.visi.com \
--to=jlb@visi.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®