From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262037AbTD2Qg4 (ORCPT ); Tue, 29 Apr 2003 12:36:56 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262038AbTD2Qg4 (ORCPT ); Tue, 29 Apr 2003 12:36:56 -0400 Received: from ulima.unil.ch ([130.223.144.143]:5250 "EHLO ulima.unil.ch") by vger.kernel.org with ESMTP id S262037AbTD2Qgy (ORCPT ); Tue, 29 Apr 2003 12:36:54 -0400 Date: Tue, 29 Apr 2003 18:49:13 +0200 From: Gregoire Favre To: linux-kernel@vger.kernel.org Subject: no ZIP (250) with 2.4.21-rc1-ac3... Message-ID: <20030429164913.GA10060@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.4.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I have first tried to boot it with the ZIP in the drive, but without sucess :-( Now, I have booted without a disk in the drive, and only got those errors: Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: IC35L120AVVA07-0, ATA DISK drive hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive blk: queue c03d3760, I/O limit 4095Mb (mask 0xffffffff) hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=15017/255/63, UDMA(100) hdb: attached ide-scsi driver. hdc: attached ide-scsi driver. Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > hdb:<3>ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 0 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 2 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 4 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 6 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 0 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 2 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 4 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 6 unable to read partition table SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28 ... SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) /dev/scsi/host0/bus0/target15/lun0: p1 p2 sdc : READ CAPACITY failed. sdc : status = 0, message = 00, host = 0, driver = 28 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x03 0x31 0x01 0xce 0x5a sdc : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:20, sector 0 I/O error: dev 08:20, sector 0 unable to read partition table I have an MSI Max2-BLR. I don't know which other info I should send for this problem? Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch