mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Udo A. Steinberg" <us15@os.inf.tu-dresden.de>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: PROBLEM: ide_floppy and 2.5.69
Date: Sun, 11 May 2003 17:19:48 +0200	[thread overview]
Message-ID: <20030511171948.1efa2ec8.us15@os.inf.tu-dresden.de> (raw)

[-- Attachment #1: Type: text/plain, Size: 2645 bytes --]


Hi,

Someone already reported problems with ide-floppy in 2.5.69, but this seems to
be a slightly different issue. I'm not seeing timeouts, but the following
backtrace with an IDE Zip drive (hde) instead. Also strange is that I have
sector 0 read errors on the cdrom (hdf) during bootup.
Looks like it tries to read the partition table from a cdrom without cd.
See below.

-Regards,
-Udo.


Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20265: IDE controller at PCI slot 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide0: BM-DMA at 0x8000-0x8007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x8008-0x800f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DTLA-307030, ATA DISK drive
hdb: IC35L120AVV207-0, ATA DISK drive
ide0 at 0x9400-0x9407,0x9002 on irq 10
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
    ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:pio, hdf:DMA
    ide3: BM-DMA at 0xd808-0xd80f, BIOS settings: hdg:pio, hdh:pio
hde: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdf: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100)
 hda: hda1
hdb: host protected area => 1
hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100)
 hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 >
end_request: I/O error, dev hdf, sector 0
hdf: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdf, sector 0
ide-floppy driver 0.99.newide
hde: 98304kB, 196608 blocks, 512 sector size
hde: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
 hde: hde1
 hde: hde1
Badness in kobject_register at lib/kobject.c:293
Call Trace:
 [<c020c968>] kobject_register+0x58/0x70
 [<c017c747>] register_disk+0x137/0x140
 [<c026609e>] add_disk+0x4e/0x60
 [<c0266020>] exact_match+0x0/0x10
 [<c0266030>] exact_lock+0x0/0x20
 [<c02a6def>] idefloppy_attach+0x16f/0x1a0
 [<c029b49f>] ata_attach+0x4f/0x120
 [<c029c3b5>] ide_register_driver+0xf5/0x110
 [<c02a6e3b>] idefloppy_init+0x1b/0x60
 [<c046272c>] do_initcalls+0x2c/0xa0
 [<c01288df>] init_workqueues+0xf/0x30
 [<c01050a3>] init+0x33/0x190
 [<c0105070>] init+0x0/0x190
 [<c010707d>] kernel_thread_helper+0x5/0x18

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

             reply	other threads:[~2003-05-11 15:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-05-11 15:19 Udo A. Steinberg [this message]
2003-05-11 17:12 Chuck Ebbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030511171948.1efa2ec8.us15@os.inf.tu-dresden.de \
    --to=us15@os.inf.tu-dresden.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®