mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ravikiran G Thirumalai <kiran@in.ibm.com>
To: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>,
	Andrew Morton <akpm@digeo.com>,
	linux-kernel@vger.kernel.org,
	David Mosberger-Tang <davidm@hpl.hp.com>
Subject: Re: [PATCH 4/3] Replace dynamic percpu implementation
Date: Thu, 22 May 2003 13:44:23 +0530	[thread overview]
Message-ID: <20030522081423.GC27614@in.ibm.com> (raw)
In-Reply-To: <20030521103156.GB2861@in.ibm.com>

On Wed, May 21, 2003 at 04:01:56PM +0530, Dipankar Sarma wrote:
>... 
> We will do some measurements with this but based on a large number
> of measurements that Kiran had done earlier, we can see a couple of things -
> 
> 1. Even though a percpu scheme using pointer arithmatic has one less memory
>    reference, the globally shared offset table is often in the cache
>    and therefore pointer arithmatic offers no added advantage.
> 
> 2. Increased sharing of cacheline helps by reducing associativity misses.
>    We see this by comparing an interlaced allocator where only same
>    sized objects share blocks vs. the current static allocator. Sharing of
>    blocks by differently sized objects also allow cache lines to be
>    kept warm as more subsystems in the kernel access them.
> 

Here is the summary of my experiments with difft per-cpu allocator methods.

The following methods were compared
1. Static per-cpu areas
2. kmalloc_percpu with NR_CPUS pointers and one extra dereference -- the
   current implementation (no interlace) (kmalloc_percpu_current)
3. kmalloc_percpu with  pointer arithmetic, but no interlace 
   (kmalloc_percpu_new)
4. alloc_percpu using Rusty's block allocator and the shared offset table
   (alloc_percpu_block)

Application used was speeding up vm_enough_memory using per-cpu counters
and reducing atomic_operataions.  Benchmark used was kernbench. Profile
ticks on vm_enough_memory was used to compare allocator methods
(vm_acct_memory was made inline).  This was on a 4 processor pIII xeon.

To summarise,
1. Static per-cpu areas was 6.5 % better  that kmalloc_percpu_current
2. kmalloc_percpu_new and static per-cpu areas had similar results.
3. alloc_percpu results were similar to static per-cpu areas and 
   kmalloc_percpu_new
4. Extra dereferences in alloc_percpu were not significant, but alloc_percpu
   was interlaced and kmalloc_percpu_new wasn't.  Insn profile seemed to
   indicate extra cost in memory dereferencing of alloc_percpu was
   offset by the interlacing/objects sharing the same cacheline part.
   but then insn profiles are only indicative...not accurate.

todo:
I have to see how a interlaced kmalloc_percpu with pointer  arithmetic 
fares in these tests (once i have it working) and the performace part
of the percpu allocators will be hopefully clear.

Thanks,
Kiran

  parent reply	other threads:[~2003-05-22  7:51 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-05-20  4:32 Rusty Russell
2003-05-21 10:31 ` Dipankar Sarma
2003-05-22  0:35   ` Rusty Russell
2003-05-22  8:14   ` Ravikiran G Thirumalai [this message]
2003-05-22  8:36     ` Rusty Russell
2003-05-22 10:49       ` Ravikiran G Thirumalai
2003-05-22 23:56         ` Rusty Russell
2003-05-23  7:23         ` Rusty Russell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030522081423.GC27614@in.ibm.com \
    --to=kiran@in.ibm.com \
    --cc=akpm@digeo.com \
    --cc=davidm@hpl.hp.com \
    --cc=dipankar@in.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rusty@rustcorp.com.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®