Re: [PATCH] amd76x_pm port to 2.5.70

[Dave Jones <davej@codemonkey.org.uk>]

On Sat, May 31, 2003 at 09:33:21PM +0300, Pasi Savolainen wrote:
 > +	/* Clear W4SG, and set PMIOEN, if using a 765/766 set STPGNT as well.
 > +	 * AMD-766: C3A41; page 59 in AMD-766 doc
 > +	 * AMD-768: DevB:3x41C; page 94 in AMD-768 doc */
 > +	pci_read_config_byte(pdev_sb, 0x41, &regbyte);
 > +	if(enable) {
 > +		regbyte |= ((0 << 0) | (is_766?1:0 << 1) | (1 << 7));
                         ^^^^^^
 
This looks totally bogus. If you want that bit clearing, you need
to AND its inverse, not OR it.  The second statement also looks a
bit funny to the eye.
								 
 > +	}
 > +	else {
 > +		regbyte |= (0 << 7);

Ditto.
 
 > +/*
 > + * Idle loop for SMP systems, supports currently only 2 processors.
 > + *
 > + * Note; for 2.5 folks - not pre-empt safe

Indeed.

 > +static void
 > +amd76x_smp_idle(void)
 > +{
 > +	/*
 > +	 * Exit idle mode immediately if the CPU does not change.
 > +	 * Usually that means that we have some load on another CPU.
 > +	 */
 > +
 > +	if (prs[0].idle && prs[1].idle && amd76x_pm_cfg.last_pr == smp_processor_id()) {
 > +		prs[0].idle = 0;
 > +		prs[1].idle = 0;
 > +		/* This looks redundent as it was just checked in the if() */
 > +		/* amd76x_pm_cfg.last_pr = smp_processor_id(); */

except with preemption, it may have changed. This needs to be fixed,
as noted in the function header. Either get_cpu(),put_cpu() or explicit
preempt_enable/disable()		

 > +
 > +/*
 > + *    Info exported through "/proc/driver/amd76x_pm"

This should really be using sysfs. Adding extra junk to /proc is
somewhat frowned upon, and with the other PM stuff now living in
sysfs, that seems to be the way forward.

 > +static void __exit
 > +amd76x_pm_cleanup(void)
 > +{
 > +#ifndef AMD76X_NTH
 > +	pm_idle = amd76x_pm_cfg.orig_idle;
 > +	wmb();
 > +	//__asm__ __volatile__ ("wbinvd;"); // propagate through SMP

Not sure why this was there, is it noted in the 766 spec to flush
the cache ? if so, it needs to be reenabled, and used with on_each_cpu()

 > +	/* 
 > +	 * FIXME: We want to wait until all CPUs have set the new
 > +	 * idle function, otherwise we will oops. This may not be
 > +	 * the right way to do it, but seems to work.
 > +	 *
 > +	 * - Best answer is going to be to ban unload, but when its debugged
 > +	 *   --- Alan
 > +	 */
 > +	schedule();
 > +	mdelay(1000);

Ummmm, oh-kay. That's a little funky. Look at how the MTRR driver
does its synchronisation, it maybe sucky, but it looks a little
cleaner than this IMO.


 > +#define LAZY_IDLE_DELAY	800	/* 0: Best savings,  3000: More responsive */

Sounds like possible candidate for something that should be exposed
via sysfs.


		Dave