Moin.

The only patch applied is acpi-20030512.
2.4.21-rc2 works without problems.
Booting _with_ local APIC enabled works fine, but alsa on VT8233 AC97 does not work.
Booting _without_ local APIC:

Linux version 2.4.21-rc7 (root@dev.net4u.de) (gcc version 3.2.2) #6 Wed Jun 4 06:51:53 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 KM266                      ) @ 0x000f8090
ACPI: RSDT (v001 KM266  AWRDACPI 16944.11825) @ 0x1fff3000
ACPI: FADT (v001 KM266  AWRDACPI 16944.11825) @ 0x1fff3040
ACPI: MADT (v001 KM266  AWRDACPI 16944.11825) @ 0x1fff6dc0
ACPI: DSDT (v001 KM266  AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
Kernel command line: root=/dev/hda3 video=aty128fb:1280x1024-16 console=ttyS0,38400n8
Initializing CPU#0
Detected 1539.876 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3073.63 BogoMIPS
Memory: 515260k/524224k available (1933k kernel code, 8576k reserved, 628k data, 104k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1800+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030509
PCI: PCI BIOS revision 2.10 entry at 0xfb6e0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23, disabled)
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23, disabled)
ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled)
ACPI: PCI Interrupt Link [ALKD] (IRQs 21, disabled)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 0
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 0
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 0
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
ACPI: Thermal Zone [THRM] (57 C)
aty128fb: Rage128 BIOS located at segment C00C0000
aty128fb: Rage128 Pro PF (AGP) [chip rev 0x1] 32M 128-bit SDR SGRAM (1:1)
Console: switching to colour frame buffer device 160x64
fb0: ATY Rage128 frame buffer device on PCI
aty128fb: Rage128 MTRR set to ON
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Non-volatile memory driver v1.2
loop: loaded (max 8 devices)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xd000. Vers LK1.1.16
 00:60:97:b8:2e:56, IRQ 5
  product code 4848 rev 00.0 date 03-23-97
  8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
  MII transceiver found at address 24, status 786f.
  Enabling bus-master transmits and whole-frame receives.
00:08.0: scatter/gather enabled. h/w checksums disabled
eth0: Dropping NETIF_F_SG since no checksum feature.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Unsupported Via chipset (device id: 3116), you might want to try agp_try_unsupported=1.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized r128 2.2.0 20010917 on minor 1
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST320423A, ATA DISK drive
blk: queue c03c5ea0, I/O limit 4095Mb (mask 0xffffffff)
hdc: LTN483L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 40011300 sectors (20486 MB) w/512KiB Cache, CHS=2490/255/63, UDMA(66)
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 29160 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi0:0:0:0: Attempting to queue an ABORT message
scsi0: Dumping Card State while idle, at SEQADDR 0x9
ACCUM = 0x0, SINDEX = 0x3, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0x6
 DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x8
SCSIPHASE = 0x0
STACK == 0x3, 0x108, 0x160, 0x0
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c 0x0, s 0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff, l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 27(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l 255, t 0xff)
Pending list: 
Kernel Free SCB list: 3 1 0 
DevQ(0:0:0): 0 waiting
scsi0:0:0:0: Command already completed
aic7xxx_abort returns 0x2002
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0: Dumping Card State in Message-out phase, at SEQADDR 0x168
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0x6
 DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0xa0, SCSISIGI = 0xb6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x1
SCSIPHASE = 0x4
STACK == 0x175, 0x160, 0x0, 0xe7
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0x2) 1(c 0x0, s 0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff, l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 27(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l 255, t 0xff)
Pending list: 2(c 0x40, s 0x7, l 0)
Kernel Free SCB list: 1 0
Untagged Q(0): 2
DevQ(0:0:0): 0 waiting
scsi0:0:0:0: Device is active, asserting ATN
Recovery code sleeping
Recovery code awake
Timer Expired
aic7xxx_abort returns 0x2003
scsi0:0:0:0: Attempting to queue a TARGET RESET message
aic7xxx_dev_reset returns 0x2003
Recovery SCB completes
scsi0:0:0:0: Attempting to queue an ABORT message
ahc_intr: HOST_MSG_LOOP bad phase 0x0
scsi0: Dumping Card State while idle, at SEQADDR 0x19d
ACCUM = 0xa0, SINDEX = 0x0, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0x6
 DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x160, 0x0, 0xe6, 0xb
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c 0x0, s 0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff, l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 27(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l 255, t 0xff)
Pending list: 3(c 0x50, s 0x7, l 0)
Kernel Free SCB list: 1 0
Untagged Q(0): 3
DevQ(0:0:0): 0 waiting
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
scsi0:0:1:0: Attempting to queue an ABORT message
scsi0: Dumping Card State while idle, at SEQADDR 0x8
ACCUM = 0x0, SINDEX = 0x2, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0x6
 DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x8
SCSIPHASE = 0x0
STACK == 0x3, 0x108, 0x160, 0xe6
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x17, l 0, t 0xff) 1(c 0x0, s 0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff, l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 27(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l 255, t 0xff)
Pending list:
Kernel Free SCB list: 2 1 0
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
scsi0:0:1:0: Command already completed
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
scsi0: Dumping Card State in Message-out phase, at SEQADDR 0x168
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0x6
 DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0xa0, SCSISIGI = 0xb6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x1
SCSIPHASE = 0x4
STACK == 0x175, 0x160, 0xe6, 0xe7
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x17, l 0, t 0x3) 1(c 0x0, s 0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff, l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 27(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l 255, t 0xff)
Pending list: 3(c 0x40, s 0x17, l 0)
Kernel Free SCB list: 1 0
Untagged Q(1): 3
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
scsi0:0:1:0: Device is active, asserting ATN
Recovery code sleeping
Recovery code awake
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue a TARGET RESET message
aic7xxx_dev_reset returns 0x2003
Recovery SCB completes
[...........]

dev:~ # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:08.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
00:0a.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 40)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS



Failed config attached.
<Earny>