Hello,

  As mentioned in the subject, the kernel doesn't work with a 3Com 3c905
card. Here's what's shown on the screen and in the logs on both startup and
in intervals during normal system run:

NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 8802 dma 0000003b fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 240(0) current 240(0)
Transmit list 00000000 vs. efce2200.
0: @efce2200  length 8000002a status 0000002a
1: @efce22a0  length 80000050 status 00000050
2: @efce2340  length 8000002a status 0000002a
3: @efce23e0  length 8000002a status 0000002a
4: @efce2480  length 8000002a status 0000002a
5: @efce2520  length 80000036 status 00000036
6: @efce25c0  length 80000036 status 00000036
7: @efce2660  length 80000036 status 00000036
8: @efce2700  length 80000050 status 00000050
9: @efce27a0  length 80000050 status 00000050
10: @efce2840  length 80000050 status 00000050
11: @efce28e0  length 80000050 status 00000050
12: @efce2980  length 80000050 status 00000050
13: @efce2a20  length 80000050 status 00000050
14: @efce2ac0  length 80000050 status 80000050
15: @efce2b60  length 80000050 status 80000050
eth0: Resetting the Tx ring pointer.

All the earlier -mm kernels worked fine in this regard,

marek