From: Adrian Bunk <bunk@fs.tum.de>
To: Adam Belay <ambx1@neo.rr.com>,
Kernel Mailing List <linux-kernel@vger.kernel.org>,
perex@suse.cz, alsa-devel@alsa-project.org
Subject: Re: 2.5.73: ALSA ISA pnp_init_resource_table compile errors
Date: Fri, 4 Jul 2003 14:11:24 +0200 [thread overview]
Message-ID: <20030704121124.GB12633@fs.tum.de> (raw)
In-Reply-To: <20030703190304.GA17707@neo.rr.com>
On Thu, Jul 03, 2003 at 07:03:04PM +0000, Adam Belay wrote:
> On Thu, Jul 03, 2003 at 04:53:43AM +0200, Adrian Bunk wrote:
> > I don't know whether it's related, but with 2.5.73 + your patch and
> > 2.5.74 my soundcard stopped working (driver compiled statically into
> > the kernel, no options given).
> >
> > >From dmesg:
> >
> > 2.5.74:
> >
> > <-- snip -->
> >
> > Advanced Linux Sound Architecture DriverVersion 0.9.4 (Mon Jun 09 12:01:18 2003 UTC).
> > specify port
> > pnp: the driver 'ad1816a' has been registered
> > pnp: match found with the PnP device '01:01.00'and the driver 'ad1816a'
> > pnp: match found with the PnP device '01:01.01'and the driver 'ad1816a'
> > ad1816a: AUDIO the requested resources areinvalid, using auto config
> > pnp: Unable to assign resources to device 01:01.00
> > ALSA device list:
> > No soundcards found.
> >
> > <-- snip -->
> >
> >
> > 2.5.72 (soundcard works):
> >
> >
> > <-- snip -->
> >
> > Advanced Linux Sound Architecture DriverVersion 0.9.4 (Mon Jun 09 12:01:18 2003 UTC).
> > specify port
> > pnp: the driver 'ad1816a' has been registered
> > pnp: match found with the PnP device '01:01.00'and the driver 'ad1816a'Jul 3 04:37:42 r063144 kernel: pnp: match found with the PnP device '01:01.01'and the driver 'ad1816a'
> > pnp: res: the device '01:01.00' has been activated.
> > pnp: res: the device '01:01.01' has been activated.
> > ALSA device list:
> > #0: ADI SoundPort AD1816A soundcard, SS at0x530, irq 5, dma 1&3
> >
> > <-- snip -->
>
> Hi,
Hi Adam,
> Some of my recent patches may correct this issue. If not, it may be
> an unresolvable resource conflict. Try catting
the dmesg output looks better, but it still doesn't work:
<-- snip -->
Advanced Linux Sound Architecture Driver Version 0.9.4 (Mon Jun 09 12:01:18 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16specify port
pnp: the driver 'ad1816a' has been registered
pnp: match found with the PnP device '01:01.00' and the driver 'ad1816a'
pnp: match found with the PnP device '01:01.01' and the driver 'ad1816a'
pnp: Device 01:01.00 activated.
pnp: Device 01:01.01 activated.
ALSA device list:
No soundcards found.
<-- snip -->
This problem is hopefully not unresolvable, the card works fine
with ISAPNP with both kernel 2.4 and kernel 2.5 <= 2.5.72 .
> /sys/bus/pnp1/devices/01:01.00/options and see if any of the needed
> irqs are available, most importantly irq 5.
<-- snip -->
# cat /sys/bus/pnp/devices/01\:01.01/options
Dependent: 01 - Priority preferred
port 0x330-0x330, align 0xf, size 0x2, 16-bit address decoding
irq 2/9 High-Edge
Dependent: 02 - Priority acceptable
port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding
irq 2/9 High-Edge
Dependent: 03 - Priority functional
port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding
irq 2/9,10,11,15 High-Edge
# cat /proc/interrupts
CPU0
0: 305721 XT-PIC timer
1: 3302 XT-PIC i8042
2: 0 XT-PIC cascade
8: 4 XT-PIC rtc
10: 2035 XT-PIC eth0
12: 5530 XT-PIC i8042
14: 7828 XT-PIC ide0
15: 25 XT-PIC ide1
NMI: 0
ERR: 0
#
<-- snip -->
> Also the 'resources' file can be used to configure the device.
> try...
> #"clear" > resources
> #"activate" > resources
>
> A printk will display if it was successful.
<-- snip -->
# cat /sys/bus/pnp/devices/01\:01.01/resources
state = active
io 0x330-0x331
irq 9
# echo "clear" > /sys/bus/pnp/devices/01\:01.01/resources
# cat /sys/bus/pnp/devices/01\:01.01/resources
state = active
io 0x330-0x331
irq 9
#
<-- snip -->
> Let me know if this works.
Unfortunately not. :-(
> Thanks,
> Adam
>...
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
next prev parent reply other threads:[~2003-07-04 11:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-22 18:53 Linux 2.5.73 Linus Torvalds
2003-06-22 20:06 ` Alex Goddard
2003-06-22 20:15 ` Andrew Morton
2003-06-22 22:53 ` Greg KH
2003-06-22 23:31 ` Andrew Morton
2003-06-22 20:46 ` Florin Iucha
2003-06-22 21:17 ` Alex Goddard
2003-06-22 21:45 ` Alex Goddard
2003-06-22 21:58 ` Alex Goddard
2003-06-23 2:52 ` Greg KH
2003-06-22 23:44 ` 2.5.73: ALSA ISA pnp_init_resource_table compile errors Adrian Bunk
2003-06-23 0:08 ` Adam Belay
2003-07-03 2:53 ` Adrian Bunk
2003-07-03 19:03 ` Adam Belay
2003-07-04 12:11 ` Adrian Bunk [this message]
2003-07-15 22:47 ` Adam Belay
2003-07-16 18:22 ` Adrian Bunk
2003-07-16 18:43 ` Adam Belay
2003-07-19 22:03 ` Adrian Bunk
2003-07-20 5:59 ` Jochen Hein
2003-08-09 20:40 ` Adrian Bunk
2003-06-23 0:31 ` 2.5.73: acorn.c compile error Adrian Bunk
2003-06-23 10:13 ` Linux 2.5.73 - Won't compile using oldconfig - config attached vlad
2003-07-02 14:31 ` John Covici
2003-07-02 16:38 ` Greg KH
2003-06-23 20:32 ` Linux 2.5.73 - keyboard failure, repost no. 3 Terje Fåberg
2003-06-26 20:45 ` Vojtech Pavlik
2003-06-27 14:22 ` Terje Fåberg
2003-06-27 19:03 ` Vojtech Pavlik
2003-06-28 9:11 ` Terje Fåberg
2003-06-28 9:37 ` Vojtech Pavlik
2003-06-28 11:40 ` Terje Fåberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030704121124.GB12633@fs.tum.de \
--to=bunk@fs.tum.de \
--cc=alsa-devel@alsa-project.org \
--cc=ambx1@neo.rr.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®