From: Andrew de Quincey <adq_dvb@lidskialf.net>
To: Mika Liljeberg <mika.liljeberg@welho.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0-test1: irq18 nobody cared! on Intel D865PERL motherboard
Date: Sun, 27 Jul 2003 00:23:43 +0100 [thread overview]
Message-ID: <200307270023.43992.adq_dvb@lidskialf.net> (raw)
In-Reply-To: <1059260505.1119.6.camel@hades>
On Sunday 27 July 2003 00:01, Mika Liljeberg wrote:
> On Sun, 2003-07-27 at 01:13, Andrew de Quincey wrote:
> > Out of interest, do these boxes have an IO-APIC and are you using ACPI?
> > If so, can you tell me if the attached patch helps?
>
> Yes, yes, nope. I tried your patch but the SATA driver now hangs during
> boot waiting for an irq that never arrives.
This sounds very familiar. As I said, the patch fixes the IO-APIC so IRQ
polarities and mode is it is now setup as per ACPI... its obviously doing
_something_ for you.
However, there is a second problem which I do not yet have a resolution for.
On my board, it manifests itself with PCI addon cards.. I never see any IRQs
from them because the IO-APIC is configured (as per ACPI) for active high
IRQs, yet the PCI standard is active low IRQs.
I am fairly certain that the IO-APIC is now configured correctly, and that the
PCI routing is correct, because Windows XP sets everything up in exactly the
same way, and everything works fine under it.
There is something else that is not being done by linux. I'd assumed this was
an nforce2-specific issue, but your results hint that it may be larger than
this.
next prev parent reply other threads:[~2003-07-26 23:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-14 13:12 Felipe Alfaro Solana
2003-07-26 21:52 ` Mika Liljeberg
2003-07-26 22:13 ` Andrew de Quincey
2003-07-26 23:01 ` Mika Liljeberg
2003-07-26 23:23 ` Andrew de Quincey [this message]
2003-07-27 0:17 ` 2.6.0-test1: irq18 nobody cared! on Intel D865PERL motherboard -- found it! Andrew de Quincey
2003-07-27 19:09 ` 2.6.0-test1: irq18 nobody cared! on Intel D865PERL motherboard Felipe Alfaro Solana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200307270023.43992.adq_dvb@lidskialf.net \
--to=adq_dvb@lidskialf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.liljeberg@welho.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®