From: Ricardo Galli <gallir@uib.es>
To: linux-kernel@vger.kernel.org
Subject: 2.6.0-test2: SATA errors, not usable
Date: Wed, 30 Jul 2003 14:24:36 +0200 [thread overview]
Message-ID: <200307301424.36605.gallir@uib.es> (raw)
I'm testing SATA with 2.6.0-test2 with a Intel P4 i875P chipset. The disk is
recognised correcly, but right after trying any kind of access (hdparm,
fdisk...) it starts to give the following errors:
...
ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 18
ide2: BM-DMA at 0xef90-0xef97, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xef98-0xef9f, BIOS settings: hdg:pio, hdh:pio
hde: ST380013AS, ATA DISK drive
...
hde: max request size: 1024KiB
hde: host protected area => 1
hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(33)
hde: hde1
...
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=70, high=0, low=70,
sector=0
end_request: I/O error, dev hde, sector 0
Buffer I/O error on device hde, logical block 0
Buffer I/O error on device hde, logical block 1
Buffer I/O error on device hde, logical block 2
...
I tried it with 2.4.21 and 2.4.22-pre9 with the same results.
Also changed the BIOS to put in "compatible mode" (as opposite to sata native)
and got the same errors.
In all cases, the disk is unusable (a seagate barracuda 80GB).
Regards,
--
ricardo galli GPG id C8114D34
http://mnm.uib.es/~gallir/
reply other threads:[~2003-07-30 12:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200307301424.36605.gallir@uib.es \
--to=gallir@uib.es \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®