From: Gene Heskett <gene.heskett@verizon.net>
To: Andrew McGregor <andrew@indranet.co.nz>
Cc: linux kernel mailing list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] O13int for interactivity
Date: Thu, 14 Aug 2003 06:48:59 -0400 [thread overview]
Message-ID: <200308140648.59547.gene.heskett@verizon.net> (raw)
In-Reply-To: <1800000.1060837436@ijir>
On Thursday 14 August 2003 01:03, Andrew McGregor wrote:
>Ah. I see you have framebuffer console on, whereas I have plain VGA
>console only. Try turning framebuffer off; two drivers for the same
>hardware may well fight over it. My X isn't patched, it just has
> their driver modules and the libraries installed.
>
>Andrew
Currently I booted to test3-mm2 with the bugoff patch, and using the x
nv drivers and everything in the video dept is cool. I see by dmesg
that the vesafb isn't being used so I'll take that out in addition
the next time I switch to the nvidia drivers.
I might add that test3-mm2 appeared to handle this mornings amanda run
more like it would have run under 2.4, a pretty nice improvement over
the bare test3, which appeared to shove amanda to the back of the
queue most of the time.
>From dmesg, snippets:
Kernel command line: ro root=/dev/hda3 hdc=ide-scsi noapic vga=791
ide_setup: hdc=ide-scsi
Found and enabled local APIC!
current: c03c59c0
current->thread_info: c0454000
[...]
Initializing RT netlink socket
spurious 8259A interrupt: IRQ7.
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3099] at 0000:00:00.0
rivafb: nVidia device/chipset 10DE0111
rivafb: Detected CRTC controller 0 being used
rivafb: RIVA MTRR set to ON
rivafb: PCI nVidia NV10 framebuffer ver 0.9.5b (nVidiaGeForce2-M, 32MB
@ 0xE0000000)
Console: switching to colour frame buffer device 80x30
[...]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 54610H6, ATA DISK drive
hda: IRQ probe failed (0xffffffba)
hdb: IRQ probe failed (0xffffffba)
hdb: IRQ probe failed (0xffffffba)
those last 3 lines are new to 2.6.
Comments?
>--On Wednesday, August 13, 2003 08:33:43 AM -0400 Gene Heskett
>
><gene.heskett@verizon.net> wrote:
>> On Wednesday 13 August 2003 01:43, Andrew McGregor wrote:
>>> --On Wednesday, August 13, 2003 01:24:31 AM -0400 Gene Heskett
>>>
>>> <gene.heskett@verizon.net> wrote:
>>>> Unrelated question: I've applied the 2.6 patches someone
>>>> pointed me at to the nvidia-linux-4496-pkg2 after figuring out
>>>> how to get it to unpack and leave itself behind, so x can be run
>>>> on 2.6 now. But its a 100% total crash to exit x by any method
>>>> when using it that way.
>>>>
>>>> Has the patch been updated in the last couple of weeks to
>>>> prevent that now? It takes nearly half an hour to e2fsck a
>>>> hundred gigs worth of drives, and its going to bite me if I
>>>> don't let the system settle before I crash it to reboot,
>>>> finishing the reboot with the hardware reset button.
>>>>
>>>> Better yet, a fresh pointer to that site.
>>>
>>> http://www.minion.de/
>>>
>>> Works fine for me, as of 2.6.0-test1 (which is when I downloaded
>>> the patch). I don't get the crash on either of my systems
>>> (GeForce2Go P3 laptop and GeForce4 Athlon desktop).
>>>
>>> Andrew
>>
>> I see some notes about patching X, which I haven't done. That
>> might be it. I also doublechecked that I'm running the correct
>> makefile, and get this:
>>
>> [root@coyote NVIDIA-Linux-x86-1.0-4496-pkg2]# ls -lR * |grep
>> Makefile -rw-r--r-- 1 root root 3623 Jul 16 22:56
>> Makefile -rw-r--r-- 1 root root 7629 Aug 5 22:24
>> Makefile -rw-r--r-- 1 root root 7629 Aug 5 21:46
>> Makefile.kbuild -rw-r--r-- 1 root root 4865 Aug 5
>> 21:46 Makefile.nvidia [root@coyote
>> NVIDIA-Linux-x86-1.0-4496-pkg2]# cd
>> ../NVIDIA-Linux-x86-1.0-4496-pkg2-4-2.4/ [root@coyote
>> NVIDIA-Linux-x86-1.0-4496-pkg2-4-2.4]# ls -lR * |grep Makefile
>> -rw-r--r-- 1 root root 3623 Jul 16 22:56 Makefile
>> -rw-r--r-- 1 root root 5665 Jul 16 22:56 Makefile
>> [root@coyote NVIDIA-Linux-x86-1.0-4496-pkg2-4-2.4]#
>>
>> My video card, from an lspci:
>> 01:00.0 VGA compatible controller: nVidia Corporation NV11
>> [GeForce2 MX DDR] (rev b2)
>>
>> And the XFree86 version is:
>> 3.2.1-21
>>
>> Interesting to note that the 'nv' driver that comes with X
>> does not do this. But it also has no openGL and such.
>> We are instructed to remove agp support from the kernel, and
>> use that which is in the nvidia kit, and I just checked the
>> .config, and its off, so thats theoreticly correct. A grep
>> for FB stuff returns this:
>>
>> CONFIG_FB=y
>># CONFIG_FB_CIRRUS is not set
>># CONFIG_FB_PM2 is not set
>># CONFIG_FB_CYBER2000 is not set
>># CONFIG_FB_IMSTT is not set
>># CONFIG_FB_VGA16 is not set
>> CONFIG_FB_VESA=y
>># CONFIG_FB_HGA is not set
>> CONFIG_FB_RIVA=y
>># CONFIG_FB_MATROX is not set
>># CONFIG_FB_RADEON is not set
>># CONFIG_FB_ATY128 is not set
>># CONFIG_FB_ATY is not set
>># CONFIG_FB_SIS is not set
>># CONFIG_FB_NEOMAGIC is not set
>># CONFIG_FB_3DFX is not set
>># CONFIG_FB_VOODOO1 is not set
>># CONFIG_FB_TRIDENT is not set
>># CONFIG_FB_PM3 is not set
>># CONFIG_FB_VIRTUAL is not set
>>
>> I'd assume the 'RIVA' fb is the correct one, its working in
>> 2.4, although I can induce a crash there by switching from X
>> to a virtual console, and then attempting to switch back to X.
>> That will generally bring the machine down. It is perfectly ok
>> to do that, repeatedly, when running the nv driver from X.
>>
>> --
>> Cheers, Gene
>> AMD K6-III@500mhz 320M
>> Athlon1600XP@1400mhz 512M
>> 99.27% setiathome rank, not too shabby for a WV hillbilly
>> Yahoo.com attornies please note, additions to this message
>> by Gene Heskett are:
>> Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
--
Cheers, Gene
AMD K6-III@500mhz 320M
Athlon1600XP@1400mhz 512M
99.27% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
next prev parent reply other threads:[~2003-08-14 10:49 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-04 16:07 Con Kolivas
2003-08-04 18:24 ` Felipe Alfaro Solana
2003-08-04 19:15 ` Antonio Vargas
2003-08-04 21:32 ` Con Kolivas
2003-08-04 20:11 ` Mike Galbraith
2003-08-04 22:11 ` Con Kolivas
2003-08-05 7:10 ` Mike Galbraith
2003-08-05 2:11 ` Nick Piggin
2003-08-05 2:20 ` Con Kolivas
2003-08-05 2:21 ` Nick Piggin
2003-08-05 3:06 ` Con Kolivas
2003-08-05 3:17 ` Nick Piggin
2003-08-06 18:48 ` Interactivity improvements Timothy Miller
2003-08-06 19:01 ` Mike Fedyk
2003-08-06 20:09 ` Helge Hafting
2003-08-06 21:15 ` Con Kolivas
2003-08-05 3:18 ` [PATCH] O13int for interactivity Con Kolivas
2003-08-05 3:31 ` Nick Piggin
2003-08-05 5:04 ` Con Kolivas
2003-08-05 5:12 ` Nick Piggin
2003-08-05 5:16 ` Con Kolivas
2003-08-05 5:28 ` Nick Piggin
2003-08-05 10:22 ` Con Kolivas
2003-08-05 10:32 ` Nick Piggin
2003-08-05 10:45 ` Con Kolivas
2003-08-05 10:48 ` Nick Piggin
2003-08-05 10:56 ` Con Kolivas
2003-08-05 11:03 ` Nick Piggin
2003-08-05 11:12 ` Con Kolivas
2003-08-05 11:23 ` Nick Piggin
2003-08-05 11:34 ` Con Kolivas
2003-08-05 10:54 ` Arjan van de Ven
2003-08-05 11:10 ` Con Kolivas
2003-08-06 21:33 ` Timothy Miller
2003-08-06 21:33 ` Con Kolivas
2003-08-07 0:27 ` Timothy Miller
2003-08-07 0:27 ` Con Kolivas
2003-08-07 0:44 ` Timothy Miller
2003-08-11 6:48 ` Rob Landley
2003-08-11 15:47 ` William Lee Irwin III
2003-08-12 2:51 ` Nick Piggin
2003-08-12 6:16 ` Mike Galbraith
2003-08-12 7:07 ` Nick Piggin
2003-08-12 7:18 ` Nick Piggin
2003-08-12 9:42 ` Mike Galbraith
2003-08-12 21:11 ` Mike Fedyk
2003-08-13 6:55 ` Mike Galbraith
2003-08-12 9:22 ` Mike Galbraith
2003-08-12 9:37 ` Nick Piggin
2003-08-12 9:48 ` Mike Galbraith
2003-08-12 10:29 ` Rob Landley
2003-08-12 11:08 ` Nick Piggin
2003-08-12 11:35 ` Rob Landley
2003-08-12 11:58 ` Nick Piggin
2003-08-13 2:08 ` jw schultz
2003-08-13 3:07 ` Gene Heskett
2003-08-13 3:24 ` Nick Piggin
2003-08-13 5:24 ` Gene Heskett
2003-08-13 5:43 ` Andrew McGregor
2003-08-13 12:33 ` Gene Heskett
2003-08-14 5:03 ` Andrew McGregor
2003-08-14 10:48 ` Gene Heskett [this message]
2003-08-12 15:36 ` Timothy Miller
2003-08-05 6:03 ` Andrew Morton
2003-08-05 7:26 ` Con Kolivas
2003-08-05 8:12 ` Oliver Neukum
2003-08-05 8:20 ` Con Kolivas
2003-08-05 8:27 ` Mike Galbraith
2003-08-05 8:43 ` Con Kolivas
2003-08-05 9:09 ` Mike Galbraith
2003-08-05 9:19 ` Con Kolivas
2003-08-05 10:04 ` Nick Piggin
2003-08-11 6:57 ` Rob Landley
2003-08-11 15:58 ` William Lee Irwin III
2003-08-05 7:53 ` Mike Galbraith
[not found] <gQ4n.5oS.7@gated-at.bofh.it>
[not found] ` <jUl6.5eh.1@gated-at.bofh.it>
[not found] ` <jUuT.5kZ.15@gated-at.bofh.it>
[not found] ` <jWn1.6K1.11@gated-at.bofh.it>
2003-08-13 13:48 ` Pascal Schmidt
2003-08-13 14:50 ` Gene Heskett
-- strict thread matches above, loose matches on Subject: below --
2003-08-06 10:35 Voluspa
2003-08-04 19:12 Voluspa
2003-07-27 15:12 [PATCH] O10int " Con Kolivas
2003-07-28 18:08 ` Valdis.Kletnieks
2003-07-28 18:40 ` Andrew Morton
2003-08-04 18:51 ` [PATCH] O13int " Felipe Alfaro Solana
2003-08-04 18:58 ` Felipe Alfaro Solana
2003-08-04 21:46 ` Con Kolivas
2003-08-04 22:16 ` Felipe Alfaro Solana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200308140648.59547.gene.heskett@verizon.net \
--to=gene.heskett@verizon.net \
--cc=andrew@indranet.co.nz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®