Everytime I send a page to my printer connected to my USB hub for the 
FIRST time on kernel 2.6.0-test3-mm1, this happens:

drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -104
drivers/usb/class/usblp.c: usblp0: error -84 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
drivers/usb/class/usblp.c: usblp0: error -110 reading printer status

Turn it off, turn it on, try again, and it works. This used to not 
break, and it still works in 2.4. Any ideas?

-Josh