Linux version 2.6.0-test4 (zdzichu@mother) (gcc version 3.3.1) #15 Sat Aug 23 12:03:02 CEST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable) BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS) BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 319MB LOWMEM available. On node 0 totalpages: 81904 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 77808 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.1 present. ACPI disabled because your bios is from 00 and too old You can enable it with acpi=force ACPI: RSDP (v000 VIA693 ) @ 0x000f70c0 ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x13ff3000 ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x13ff3040 ACPI: DSDT (v001 VIA693 AWRDACPI 0x00001000 MSFT 0x0100000a) @ 0x00000000 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=linux2_6fb root=304 video=matroxfb:off root=/dev/ide/host0/bus0/target0/lun0/part4 resume=/dev/hda2 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 368.511 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 720.89 BogoMIPS Memory: 319716k/327616k available (2503k kernel code, 7144k reserved, 879k data, 160k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Celeron (Mendocino) stepping 05 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PM: Adding info for No Bus:legacy Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfb2b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030813 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbed0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbef8, dseg 0xf0000 PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0c PM: Adding info for pnp:00:0d PM: Adding info for pnp:00:0e PM: Adding info for pnp:00:10 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver ACPI: ACPI tables contain no PCI IRQ routing entries PCI: Invalid ACPI-PCI IRQ routing table PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:07.0 PM: Adding info for pci:0000:00:07.1 PM: Adding info for pci:0000:00:07.2 PM: Adding info for pci:0000:00:07.3 PM: Adding info for pci:0000:00:07.4 PM: Adding info for pci:0000:00:07.5 PM: Adding info for pci:0000:00:0a.0 PM: Adding info for pci:0000:00:0b.0 PM: Adding info for pci:0000:01:00.0 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 pty: 256 Unix98 ptys configured devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.11a Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: Maximum main memory to use for agp memory: 262M agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized mga 3.1.0 20021029 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: loaded (max 8 devices) Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio hda: ST380011A, ATA DISK drive PM: Adding info for No Bus:ide0 Using anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PM: Adding info for ide:0.0 hdc: 8X4X32, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide1 ide1 at 0x170-0x177,0x376 on irq 15 PM: Adding info for ide:1.0 hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(66) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC). PCI: Found IRQ 10 for device 0000:00:0b.0 PCI: Sharing IRQ 10 with 0000:00:07.2 PCI: Sharing IRQ 10 with 0000:00:07.3 ALSA device list: #0: Ensoniq AudioPCI ENS1370 at 0xec00, irq 10 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 32768 bind 65536) ip_conntrack version 2.1 (2559 buckets, 20472 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team NET4: Ethernet Bridge 008 for NET4.0 Bridge firewalling registered swsusp: Resume From Partition: /dev/hda2, Device: hda2 Resume Machine: This is normal swap space Resume Machine: Error -22 resuming found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda4) for (hda4) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 160k freed blk: queue d3de4800, I/O limit 4095Mb (mask 0xffffffff) Adding 506036k swap on /dev/ide/host0/bus0/target0/lun0/part2. Priority:2 extents:1 SGI XFS for Linux with ACLs, no debug enabled XFS mounting filesystem hda3 Ending clean XFS mount for filesystem: hda3 PM: Adding info for No Bus:i2c-0 registering 0-6000 PM: Adding info for i2c:0-6000 Disabled Privacy Extensions on device c040d580(lo) 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 12 for device 0000:00:0a.0 PCI: Sharing IRQ 12 with 0000:00:07.5 eth0: RealTek RTL8139 Fast Ethernet at 0xd4948000, 00:06:4f:00:e8:99, IRQ 12 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting half-duplex based on auto-negotiated partner ability 0000. Disabled Privacy Extensions on device d34d3c00(sxb0) process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 10 for device 0000:00:07.2 PCI: Sharing IRQ 10 with 0000:00:07.3 PCI: Sharing IRQ 10 with 0000:00:0b.0 uhci-hcd 0000:00:07.2: UHCI Host Controller uhci-hcd 0000:00:07.2: irq 10, io base 0000d400 uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 PM: Adding info for usb:usb1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected PM: Adding info for usb:1-0:0 PCI: Found IRQ 10 for device 0000:00:07.3 PCI: Sharing IRQ 10 with 0000:00:07.2 PCI: Sharing IRQ 10 with 0000:00:0b.0 uhci-hcd 0000:00:07.3: UHCI Host Controller uhci-hcd 0000:00:07.3: irq 10, io base 0000d800 uhci-hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 PM: Adding info for usb:usb2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected PM: Adding info for usb:2-0:0 PCI: Found IRQ 12 for device 0000:00:07.5 PCI: Sharing IRQ 12 with 0000:00:0a.0 PCI: Setting latency timer of device 0000:00:07.5 to 64 agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode