Re: 2.6.0-test4-mm4 - USD disconnect oops

[Greg KH <greg@kroah.com>]

On Tue, Sep 02, 2003 at 07:59:36PM -0400, John Stoffel wrote:
> >>>>> "Greg" == Greg KH <greg@kroah.com> writes:
> 
> >> Here's the backtrace, my .config is at the end.  It's a PIII Xeon 2 x
> >> 550mhz, Dell Precision 610 motherboard/system, 768mb of RAM.  The only
> >> USB devices are the controllers and the CompactFlash reader, which
> >> works great under 2.4.  
> 
> Greg> Does this happen on 2.6.0-test4?  (no -mm).
> 
> Well, I can now use the usb-storage device under 2.6.0-test4 without
> any problems, but I just did a quick test.  So there's something in
> -mm4 which is messing me and usb in general up.  I've made the
> following changes though, so I should go back and check:
> 
> - upgrade to module-init-tools-0.9.13
> - upgrade to hotplug-2003_08_05-1
> 	     hotplug-base-2003_08_05-1
> 
> I'll see if I can figure out what changed in the -mm4 patch to cause
> this problem.  Could it be the kobject patch Akpm posted?  It looks
> like the oops I've gotten.

Try adding that patch and see if it helps.  It sure can't hurt as it
fixes a real bug in the -mm tree :)

Thanks for testing 2.6.0-test4.

greg k-h