Linux version 2.6.0-test5 (root@flapp) (gcc version 3.3) #1 Wed Sep 10 01:06:13 CEST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable) BIOS-e820: 0000000017ff0000 - 0000000017ff8000 (ACPI data) BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 0000000017ff0000 (usable) user: 0000000017ff0000 - 0000000017ff8000 (ACPI data) user: 0000000017ff8000 - 0000000018000000 (ACPI NVS) user: 00000000ffff0000 - 0000000100000000 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98288 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 94192 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Building zonelist for node : 0 Kernel command line: mem=393152K Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 647.031 MHz processor. Console: colour VGA+ 80x25 Memory: 385496k/393152k available (2052k kernel code, 6900k reserved, 655k data, 112k init, 0k highmem) Calibrating delay loop... 1273.85 BogoMIPS Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 apm: BIOS version 1.2 Flags 0x0f (Driver version 1.16ac) ikconfig 0.6 with /proc/ikconfig VFS: Disk quotas dquot_6.5.1 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: devfs_debug: 0x0 devfs: boot_options: 0x1 SGI XFS for Linux with ACLs, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected ALi M???? chipset agpgart: Maximum main memory to use for agp memory: 321M agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized r128 2.5.0 20030725 on minor 0 loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:10.0 ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x6050-0x6057, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x6058-0x605f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHR2020AT, ATA DISK drive Using anticipatory scheduling io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 BIOS EDD facility v0.09 2003-Jan-22, 1 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 112k freed blk: queue d7d52a00, I/O limit 4095Mb (mask 0xffffffff) EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hda1, internal journal Intel(R) PRO/100 Network Driver - version 2.3.18-k1 Copyright (c) 2003 Intel Corporation PCI: Guessed IRQ 10 for device 0000:00:0a.0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Guessed IRQ 11 for device 0000:00:13.0 PCI: Sharing IRQ 11 with 0000:00:13.1 Yenta: CardBus bridge found at 0000:00:13.0 [1025:1010] Yenta: ISA IRQ list 0638, PCI irq11 Socket status: 30000006 PCI: Guessed IRQ 11 for device 0000:00:13.1 PCI: Sharing IRQ 11 with 0000:00:13.0 Yenta: CardBus bridge found at 0000:00:13.1 [1025:1010] Yenta: ISA IRQ list 0638, PCI irq11 Socket status: 30000006 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT e100: eth0 NIC Link is Up 100 Mbps Full duplex PCI: Guessed IRQ 10 for device 0000:00:06.0 input: PS/2 Generic Mouse on isa0060/serio1 eth0: no IPv6 routers present Process accounting paused process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT Out of Memory: Killed process 13793 (opera). Out of Memory: Killed process 13792 (opera).