From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263435AbTIWVXA (ORCPT ); Tue, 23 Sep 2003 17:23:00 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263436AbTIWVXA (ORCPT ); Tue, 23 Sep 2003 17:23:00 -0400 Received: from host-208-46-192-132.sierradesign.com ([208.46.192.132]:14854 "HELO mailsrv1.sierradesign.com") by vger.kernel.org with SMTP id S263435AbTIWVWs convert rfc822-to-8bit (ORCPT ); Tue, 23 Sep 2003 17:22:48 -0400 Content-Type: text/plain; charset="us-ascii" From: Steve Snyder Organization: Sierra Design Group To: LKML Subject: 23-pre5: "No IRQ known for interrupt pin A..." Date: Tue, 23 Sep 2003 14:22:23 -0700 User-Agent: KMail/1.4.3 MIME-Version: 1.0 Content-Transfer-Encoding: 8BIT Message-Id: <200309231422.23666.ssnyder@sierradesign.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello. I am in the process of configuring the kernel for use on my new notebook, a Compaq Presario 2570us. I am running RedHat v9 on this machine, with all RH-released updates applied and kernel v2.4.23-pre5. (I am using the very latest kernel code available because Red Hat's latest release, a patched v2.4.20, doesn't support all the devices on this machine.) As the subject says, I am getting this error: PCI: No IRQ known for interrupt pin A of device 00:10.0 Below is the output of "lspci -vv" and "dmesg". Sorry about so much text, but with all the ACPI and PCI entries, I'm not certain about what is relevant and what isn't. Device 00:10.0 is shown as being the IDE controller, but my IDE hard disk is working fine, and does in fact have an IRQ assigned to it. Can anyone shed some light as to what problem is being reported and what can be done about it? Thanks. -------------- # cat /proc/interrupts CPU0 0: 444420 XT-PIC timer 1: 3 XT-PIC keyboard 2: 0 XT-PIC cascade 9: 622 XT-PIC acpi 10: 1785 XT-PIC ohci1394, usb-uhci, usb-uhci, eth0 11: 5 XT-PIC OZ6912 Cardbus Controller, ehci_hcd 12: 2 XT-PIC PS/2 Mouse 14: 3838 XT-PIC ide0 15: 3 XT-PIC ide1 NMI: 0 ERR: 0 -------------- Linux version 2.4.23-pre5 (root@earth.snydernet.lan) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #5 Tue Sep 23 12:30:01 PDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bf70000 (usable) BIOS-e820: 000000001bf70000 - 000000001bf7f000 (ACPI data) BIOS-e820: 000000001bf7f000 - 000000001bf80000 (ACPI NVS) BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 447MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 114544 zone(0): 4096 pages. zone(1): 110448 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f6c80 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bf783e5 ACPI: FADT (v001 ATI Salmon 0x06040000 ATI 0x000f4240) @ 0x1bf7ef64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1bf7efd8 ACPI: DSDT (v001 ATI MS2_1535 0x06040000 MSFT 0x0100000e) @ 0x00000000 Kernel command line: ro root=/dev/hda2 hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 2392.424 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4771.02 BogoMIPS Memory: 450544k/458176k available (1491k kernel code, 7244k reserved, 520k data, 76k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000 CPU: Common caps: bfebf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030916 PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10) ACPI: PCI Interrupt Link [LNK2] (IRQs *10) ACPI: PCI Interrupt Link [LNK3] (IRQs *10) ACPI: PCI Interrupt Link [LNK4] (IRQs 10) ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11) ACPI: PCI Interrupt Link [LNK6] (IRQs 10) ACPI: PCI Interrupt Link [LNK7] (IRQs *5) ACPI: PCI Interrupt Link [LNK8] (IRQs 10) ACPI: Embedded Controller [EC0] (gpe 24) schedule_task(): keventd has not started PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 PCI: No IRQ known for interrupt pin A of device 00:10.0 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (44 C) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: Enabling device 00:08.0 (0000 -> 0003) Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (10b9,5457,103c,0850) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. register_serial(): autoconfig failed natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 originally by Donald Becker http://www.scyld.com/network/natsemi.html 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder eth0: NatSemi DP8381[56] at 0xdc80e000, 00:0b:cd:a9:a0:b4, IRQ 10. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 380M agpgart: Unsupported ATI chipset (device id: cbb2), you might want to try agp_try_unsupported=1. agpgart: no supported devices found. [drm] Initialized radeon 1.7.0 20020828 on minor 0 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 00:10.0 PCI: No IRQ known for interrupt pin A of device 00:10.0 ALI15X3: chipset revision 196 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:pio, hdd:pio hda: HTS726060M9AT00, ATA DISK drive blk: queue c0332420, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 117210240 sectors (60012 MB) w/7877KiB Cache, CHS=7296/255/63, UDMA(100) Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 > SCSI subsystem driver Revision: 1.00 ohci1394: $Rev: 1010 $ Ben Collins PCI: Enabling device 00:0c.0 (0010 -> 0012) ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0005800-d0005fff] Max Packet=[2048] Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Enabling device 00:0a.0 (0005 -> 0007) Intel PCIC probe: not found. usb.c: registered new driver hub Yenta IRQ list 00b8, PCI irq11 Socket status: 30000007 PCI: Enabling device 00:0b.2 (0010 -> 0012) ehci_hcd 00:0b.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:0b.2: irq 11, pci mem dc814000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:0b.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 4 ports detected host/usb-uhci.c: $Revision: 1.275 $ time 12:33:22 Sep 23 2003 host/usb-uhci.c: High bandwidth mode enabled PCI: Enabling device 00:0b.0 (0010 -> 0011) host/usb-uhci.c: USB UHCI at I/O 0x2000, IRQ 10 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Enabling device 00:0b.1 (0010 -> 0011) host/usb-uhci.c: USB UHCI at I/O 0x2020, IRQ 10 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[000bcd71a0a96987] hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 76k freed EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 506036k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1905 Type: CD-ROM ANSI SCSI revision: 02 eth0: link up. -------------- 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cbb2 (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 7010 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) Subsystem: Hewlett-Packard Company: Unknown device 0850 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR+ TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00:0b.0 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company: Unknown device 0850 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company: Unknown device 0850 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2,x4 Command: RQ=0 SBA+ AGP- 64bit- FW- Rate= Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- -------------- end of output