From: reg@dwf.com
To: linux-kernel@vger.kernel.org
Subject: 2.6.0 - Network doesn't come up.
Date: Thu, 02 Oct 2003 15:38:06 -0600 [thread overview]
Message-ID: <200310022138.h92Lc67x005420@orion.dwf.com> (raw)
OK, Im trying to run 2.6.0-test6 on top of RH9.
I have progress in some areas but not others.
NETWORKING. is a nogo.
If I compile the driver 3c59x as a module, it gets loaded, but
with the driver in the kernel or as a module, I get the messages
in the messages file (during boot) or when I do a ./network start
from /etc/rc.d/init.d
---
[root@orion init.d]# ./network* restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Setting network parameters: [ OK ]
Bringing up loopback interface: arping: socket: Address family not supported
by protocol
Error, some other host already uses address 127.0.0.1.
[FAILED]
Bringing up interface eth0: arping: socket: Address family not supported by
protocol
Error, some other host already uses address 204.134.2.19.
[FAILED]
---
Reg.Clemens
reg@dwf.com
next reply other threads:[~2003-10-02 21:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-02 21:38 reg [this message]
2003-10-02 21:45 ` Zwane Mwaikambo
2003-10-02 22:05 ` dacin
2003-10-02 22:25 ` James Morris
-- strict thread matches above, loose matches on Subject: below --
2003-10-02 19:22 reg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200310022138.h92Lc67x005420@orion.dwf.com \
--to=reg@dwf.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®