Linux version 2.6.0-test6 (root@deadlock.boom.net) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #2 SMP Tue Oct 7 02:15:07 PDT 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000f8000 reserved twice. hm, page 000f9000 reserved twice. On node 0 totalpages: 524272 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294896 pages, LIFO batch:16 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000f5270 ACPI: XSDT (v001 A M I OEMXSDT 0x07000308 MSFT 0x00000097) @ 0x7fff0100 ACPI: FADT (v003 A M I OEMFACP 0x07000308 MSFT 0x00000097) @ 0x7fff0200 ACPI: MADT (v001 A M I OEMAPIC 0x07000308 MSFT 0x00000097) @ 0x7fff0300 ACPI: OEMB (v001 A M I OEMBIOS 0x07000308 MSFT 0x00000097) @ 0x7ffff040 ACPI: DSDT (v001 1ABHQ 1ABHQ007 0x00000007 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: IOAPIC (id[0x08] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 8 IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: ro root=/dev/hdc3 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2667.825 MHz processor. Console: colour VGA+ 80x25 Memory: 2070944k/2097088k available (2574k kernel code, 25012k reserved, 978k data, 164k init, 1179584k highmem) Calibrating delay loop... 5259.26 BogoMIPS Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 per-CPU timeslice cutoff: 1463.14 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5324.80 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 Booting processor 2/6 eip 3000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5324.80 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU#2: Intel P4/Xeon Extended MCE MSRs (12) available CPU#2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 Booting processor 3/7 eip 3000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5324.80 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU#3: Intel P4/Xeon Extended MCE MSRs (12) available CPU#3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 Total of 4 processors activated (21233.66 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-9, 8-16, 8-17, 8-18, 8-19, 8-21, 8-22, 8-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 number of MP IRQ sources: 15. number of IO-APIC #8 registers: 24. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 000 00 1 0 0 0 0 0 0 00 0a 001 01 0 0 0 0 0 1 1 71 0b 001 01 0 0 0 0 0 1 1 79 0c 001 01 0 0 0 0 0 1 1 81 0d 001 01 0 0 0 0 0 1 1 89 0e 001 01 0 0 0 0 0 1 1 91 0f 001 01 0 0 0 0 0 1 1 99 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 001 01 1 1 0 1 0 1 1 A1 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:20 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2666.0373 MHz. ..... host bus clock speed is 133.0318 MHz. checking TSC synchronization across 4 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 Bringing up 2 CPU 2 IS NOW UP! Starting migration thread for cpu 2 Bringing up 3 CPU 3 IS NOW UP! Starting migration thread for cpu 3 CPUS done 8 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20030813 IOAPIC[0]: Set PCI routing entry (8-20 -> 0xa9 -> IRQ 20 Mode:1 Active:1) ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.SBRG.HPET._STA] (Node c24d9680), AE_AML_REGION_LIMIT ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.SBRG.HPET._STA] (Node c24d9680), AE_AML_REGION_LIMIT ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.SBRG.HPET._STA] (Node c24d9680), AE_AML_REGION_LIMIT ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub IOAPIC[0]: Set PCI routing entry (8-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1) 00:00:1f[A] -> 8-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (8-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1) 00:00:1f[B] -> 8-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (8-16 -> 0xc1 -> IRQ 16 Mode:1 Active:1) 00:00:1d[A] -> 8-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (8-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1) 00:00:1d[B] -> 8-19 -> IRQ 19 Pin 8-18 already programmed IOAPIC[0]: Set PCI routing entry (8-23 -> 0xd1 -> IRQ 23 Mode:1 Active:1) 00:00:1d[D] -> 8-23 -> IRQ 23 IOAPIC[0]: Set PCI routing entry (8-21 -> 0xd9 -> IRQ 21 Mode:1 Active:1) 00:01:04[A] -> 8-21 -> IRQ 21 Pin 8-19 already programmed Pin 8-16 already programmed Pin 8-17 already programmed Pin 8-18 already programmed Pin 8-16 already programmed Pin 8-17 already programmed Pin 8-18 already programmed Pin 8-19 already programmed Pin 8-17 already programmed Pin 8-18 already programmed Pin 8-19 already programmed Pin 8-16 already programmed Pin 8-18 already programmed Pin 8-19 already programmed Pin 8-16 already programmed Pin 8-17 already programmed Pin 8-19 already programmed Pin 8-16 already programmed Pin 8-17 already programmed Pin 8-18 already programmed IOAPIC[0]: Set PCI routing entry (8-22 -> 0xe1 -> IRQ 22 Mode:1 Active:1) 00:01:07[A] -> 8-22 -> IRQ 22 Pin 8-23 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. Starting balanced_irq highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) ACPI: Processor [CPU4] (supports C1) pty: 256 Unix98 ptys configured request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Real Time Clock Driver v1.12 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Intel(R) PRO/1000 Network Driver - version 5.2.19-k1 Copyright (c) 1999-2003 Intel Corporation. eth1: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2 ICH5-SATA: chipset revision 2 ICH5-SATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hdb: DVD-ROM BDV316C, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: WDC WD2000JD-00FYB0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 1024KiB hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hdc: hdc1 hdc2 hdc3 hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 3ware Storage Controller device driver for Linux v1.02.00.037. 3w-xxxx: No cards found. ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem f882ec00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci-hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci-hcd 0000:00:1d.0: irq 16, io base 0000e400 uhci-hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci-hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci-hcd 0000:00:1d.1: irq 19, io base 0000e800 uhci-hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci-hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci-hcd 0000:00:1d.2: irq 18, io base 0000ec00 uhci-hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver acm drivers/usb/class/cdc-acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters drivers/usb/class/bluetty.c: USB Bluetooth support registered drivers/usb/core/usb.c: registered new driver bluetty drivers/usb/class/bluetty.c: USB Bluetooth tty driver v0.13 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver catc drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver drivers/usb/net/kaweth.c: Driver loading drivers/usb/core/usb.c: registered new driver kaweth drivers/usb/net/pegasus.c: v0.5.12 (2003/06/06):Pegasus/Pegasus II USB Ethernet driver drivers/usb/core/usb.c: registered new driver pegasus drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.5.7 (2002/12/31) drivers/usb/core/usb.c: registered new driver rtl8150 drivers/usb/core/usb.c: registered new driver usbnet mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 3084.000 MB/sec 8regs_prefetch: 2292.000 MB/sec 32regs : 1932.000 MB/sec 32regs_prefetch: 1752.000 MB/sec pIII_sse : 3340.000 MB/sec pII_mmx : 4172.000 MB/sec p5_mmx : 4080.000 MB/sec raid5: using function: pIII_sse (3340.000 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 164k freed EXT3 FS on hdc3, internal journal Adding 4200988k swap on /dev/hdc2. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode.