mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Thom Borton <borton@phys.ethz.ch>
To: linux-kernel@vger.kernel.org
Subject: PCMCIA CD-ROM does not work
Date: Fri, 10 Oct 2003 16:52:50 +0200	[thread overview]
Message-ID: <200310101652.53796.borton@phys.ethz.ch> (raw)

[-- Attachment #1: Type: text/plain, Size: 429 bytes --]


Hello everybody

I have a Sony Vaio PCG-Z600NE with an external PCMCIA 4x CD-ROM drive, 
which used to work perfectly until around 2.4.18. With later kernels 
I did not succeed to get it running. I tried extensively with 2.4.22. 
As far as I remember, 2.4.19-21 did not work either.

I have attached the syslogs for 2.4.18, 2.4.22 and 2.6.0-test7.

Any idea what's wrong? Thanks for the help.

Thom

-- 
Thom Borton
Switzerland

[-- Attachment #2: syslog-2.4.22-fail.txt --]
[-- Type: text/plain, Size: 1175 bytes --]

Oct 10 09:35:49 grisu kernel: Yenta IRQ list 00b8, PCI irq9
Oct 10 09:35:49 grisu kernel: Socket status: 30000086
Oct 10 09:35:49 grisu cardmgr[378]: watching 1 socket
Oct 10 09:35:49 grisu cardmgr[379]: starting, version is 3.2.5
Oct 10 09:36:09 grisu cardmgr[379]: socket 0: Ninja ATA
Oct 10 09:36:09 grisu kernel: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xdc000-0xdffff 0xe8000-0xfffff
Oct 10 09:36:09 grisu cardmgr[379]: executing: 'modprobe ide-cs'
Oct 10 09:36:12 grisu kernel: hde: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
Oct 10 09:36:12 grisu kernel: hde: IRQ probe failed (0xb4f8)
Oct 10 09:36:12 grisu kernel: hdf: IRQ probe failed (0xb4f8)
Oct 10 09:36:12 grisu kernel: hdf: IRQ probe failed (0xb4f8)
Oct 10 09:36:12 grisu kernel: ide2: DISABLED, NO IRQ
Oct 10 09:36:15 grisu kernel: ide2: ports already in use, skipping probe
Oct 10 09:36:31 grisu last message repeated 8 times
Oct 10 09:36:31 grisu kernel: ide_cs: ide_register() at 0x180 & 0x386, irq 0 failed
Oct 10 09:36:32 grisu cardmgr[379]: get dev info on socket 0 failed: Resource temporarily unavailable
Oct 10 09:36:36 grisu cardmgr[379]: executing: 'modprobe -r ide-cs'

[-- Attachment #3: syslog-2.4.18-success.txt --]
[-- Type: text/plain, Size: 1866 bytes --]

Oct 10 09:31:46 grisu kernel: Yenta IRQ list 00b8, PCI irq9
Oct 10 09:31:46 grisu kernel: Socket status: 30000416
Oct 10 09:31:46 grisu cardmgr[381]: watching 1 socket
Oct 10 09:31:46 grisu kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Oct 10 09:31:46 grisu kernel: cs: IO port probe 0x0800-0x08ff: clean.
Oct 10 09:31:46 grisu kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x220-0x22f 0x330-0x33f 0x370-0x37f 0x388-0x38f 0x398-0x39f 0x3f8-0x3ff 0x4d0-0x4d7
Oct 10 09:31:46 grisu kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Oct 10 09:31:46 grisu cardmgr[382]: starting, version is 3.2.5
Oct 10 09:32:09 grisu cardmgr[382]: socket 0: Ninja ATA
Oct 10 09:32:09 grisu kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Oct 10 09:32:09 grisu cardmgr[382]: executing: 'modprobe ide-cs'
Oct 10 09:32:12 grisu kernel: hde: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
Oct 10 09:32:12 grisu kernel: ide2 at 0x180-0x187,0x386 on irq 3
Oct 10 09:32:12 grisu kernel: ide_cs: hde: Vcc = 5.0, Vpp = 0.0
Oct 10 09:32:12 grisu cardmgr[382]: executing: './ide start hde'
Oct 10 09:32:12 grisu kernel: hde: bad special flag: 0x03
Oct 10 09:32:28 grisu kernel: hde: ATAPI 16X CD-ROM drive, 128kB Cache
Oct 10 09:32:28 grisu kernel: Uniform CD-ROM driver Revision: 3.12
Oct 10 09:32:29 grisu kernel: VFS: Disk change detected on device ide2(33,0)
Oct 10 09:32:29 grisu kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Oct 10 09:32:29 grisu kernel: ISOFS: changing to secondary root
Oct 10 09:32:38 grisu kernel: ide2: unexpected interrupt, status=0xff, count=1
Oct 10 09:32:39 grisu cardmgr[382]: executing: './ide stop hde'
Oct 10 09:32:39 grisu modprobe: modprobe: Can't locate module block-major-33
Oct 10 09:32:39 grisu cardmgr[382]: + open() failed: No such device or address
Oct 10 09:32:39 grisu cardmgr[382]: executing: 'modprobe -r ide-cs'

[-- Attachment #4: syslog-2.6.0-test7-fail.txt --]
[-- Type: text/plain, Size: 1029 bytes --]

Oct 10 09:38:57 grisu kernel: Yenta: CardBus bridge found at 0000:00:0c.0 [104d:8082]
Oct 10 09:38:57 grisu kernel: Yenta: ISA IRQ list 00b8, PCI irq9
Oct 10 09:38:57 grisu kernel: Socket status: 30000086
Oct 10 09:38:58 grisu cardmgr[411]: watching 1 socket
Oct 10 09:38:58 grisu cardmgr[412]: starting, version is 3.2.5
Oct 10 09:39:15 grisu cardmgr[412]: socket 0: Ninja ATA
Oct 10 09:39:15 grisu kernel: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xdc000-0xdffff 0xe8000-0xfffff
Oct 10 09:39:15 grisu cardmgr[412]: executing: 'modprobe ide-cs'
Oct 10 09:39:15 grisu kernel: ide-cs: RequestIRQ: Unsupported mode
Oct 10 09:39:15 grisu cardmgr[412]: get dev info on socket 0 failed: No such device
Oct 10 09:39:31 grisu cardmgr[412]: executing: 'modprobe -r ide-cs'
Oct 10 09:39:31 grisu cardmgr[412]: + FATAL: Error removing ide_cs (/lib/modules/2.6.0-test6/kernel/drivers/ide/legacy/ide-cs.ko): Kernel does not have module unloading support
Oct 10 09:39:31 grisu cardmgr[412]: modprobe exited with status 1

             reply	other threads:[~2003-10-10 14:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-10-10 14:52 Thom Borton [this message]
2003-10-10 15:09 ` Dave Jones
2003-10-10 15:44   ` Thom Borton
2003-10-10 16:06     ` Bartlomiej Zolnierkiewicz
2003-10-10 16:27     ` Dave Jones
2003-10-10 16:43       ` Thom Borton
2003-10-10 16:47         ` Dave Jones
2003-10-11 11:14           ` Thom Borton
2003-10-13 12:35             ` Marcelo Tosatti
2003-10-15  7:40               ` Thom Borton
2003-11-10 19:55               ` Thom Borton
2003-10-10 16:04 ` Russell King
2003-10-10 16:35   ` Thom Borton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200310101652.53796.borton@phys.ethz.ch \
    --to=borton@phys.ethz.ch \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®