From: Nico Schottelius <nico-kernel@schottelius.org>
To: Tom Rini <trini@kernel.crashing.org>
Cc: Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-net@vger.kernel.org, Andrew Morton <akpm@osdl.org>
Subject: Re: 3c59x problem with 2.4.6-test[34]
Date: Sat, 18 Oct 2003 14:27:08 +0200 [thread overview]
Message-ID: <20031018122708.GA401@schottelius.org> (raw)
In-Reply-To: <20031017235325.GA957@ip68-0-152-218.tc.ph.cox.net>
[-- Attachment #1: Type: text/plain, Size: 5171 bytes --]
another lspci -vvv where the card works f***cking slow:
00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a000 [size=64]
Expansion ROM at <unassigned> [disabled] [size=64K]
Nico
Tom Rini [Fri, Oct 17, 2003 at 04:53:25PM -0700]:
> On Wed, Oct 15, 2003 at 11:35:06AM -0700, Tom Rini wrote:
> > On Mon, Sep 29, 2003 at 08:18:27AM -0700, Tom Rini wrote:
> > > On Sun, Sep 07, 2003 at 02:23:48PM -0700, Tom Rini wrote:
> > > > Hello. I've run into an odd problem with the 3c59x driver on
> > > > 2.6.0-test[34] (and 2.6.0-test4-mm6). First, from scripts/ver_linux:
> > > >
> > > > If some fields are empty or look unusual you may have an old version.
> > > > Compare to the current minimal requirements in Documentation/Changes.
> > > >
> > > > Linux opus 2.6.0-test4 #2 SMP Sat Sep 6 20:43:52 MST 2003 i686 GNU/Linux
> > > >
> > > > Gnu C 3.3.2
> > > > Gnu make 3.80
> > > > util-linux 2.11z
> > > > mount 2.11z
> > > > e2fsprogs 1.35-WIP
> > > > PPP 2.4.1
> > > > nfs-utils 1.0.5
> > > > Linux C Library 2.3.2
> > > > Dynamic linker (ldd) 2.3.2
> > > > Procps 3.1.11
> > > > Net-tools 1.60
> > > > Console-tools 0.2.3
> > > > Sh-utils 5.0.90
> > > > Modules Loaded parport_pc lp parport ipt_REJECT iptable_filter ipt_MASQUERADE ip_nat_ftp ip_conntrack_ftp iptable_nat ip_conntrack ip_tables 8250 core soundcore microcode rtc tulip crc32 af_packet 3c59x hid uhci_hcd usbcore ext2
> > > >
> > > > and lspci:
> > > > 00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
> > > > 00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
> > > > 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
> > > > 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
> > > > 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
> > > > 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
> > > > 00:0b.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
> > > > 00:0c.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
> > > > 00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
> > > > 00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
> > > > 00:0f.0 Unknown mass storage controller: Promise Technology, Inc. 20262 (rev 01)
> > > > 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
> > > >
> > > > What seems to happen on every other boot (and just rebooting the machine
> > > > will 'fix' this) is that when 3c59x is loaded I get:
> > > > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> > > > 0000:00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe480. Vers LK1.1.19
> > > > ***WARNING*** No MII transceivers found!
> > > >
> > > > and then dhcp never gets an IP. Virtually all of 2.4 has run just fine
> > > > in this particular setup.
> > >
> > > This is still a problem with 2.6.0-test6.
> >
> > And with 2.6.0-test7.
>
> .. and 2.6.0-test8.
>
> A full lspci on the card gives:
> $ sudo lspci -vvv -s 00:0e.0
> 00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
> Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at e480 [size=128]
> Region 1: Memory at febffd80 (32-bit, non-prefetchable) [size=128]
> Expansion ROM at febc0000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
> --
> Tom Rini
> http://gate.crashing.org/~trini/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
quote: there are two time a day you should do nothing: before 12 and after 12
(Nico Schottelius after writin' a very senseless email)
cmd: echo God bless America | sed 's/.*\(A.*\)$/Why \1?/'
pgp: new id: 0x8D0E27A4 | ftp.schottelius.org/pub/family/nico/pgp-key.new
url: http://nerd-hosting.net - domains for nerds (from a nerd)
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2003-10-18 10:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-07 21:23 Tom Rini
2003-09-29 15:18 ` Tom Rini
2003-10-15 18:35 ` Tom Rini
2003-10-17 23:53 ` Tom Rini
2003-10-18 12:27 ` Nico Schottelius [this message]
2003-10-18 11:14 ` Andrew Morton
2003-10-24 19:34 ` Tom Rini
2003-10-24 19:43 ` Andrew Morton
2003-10-24 19:52 ` Tom Rini
2003-10-24 20:24 ` Andrew Morton
2003-10-24 22:01 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031018122708.GA401@schottelius.org \
--to=nico-kernel@schottelius.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-net@vger.kernel.org \
--cc=trini@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome