From: Daniele Venzano <webvenza@libero.it>
To: Pavel Machek <pavel@ucw.cz>, Patrick Mochel <mochel@osdl.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.0-test7 - Suspend to Disk success
Date: Sat, 18 Oct 2003 19:54:23 +0200 [thread overview]
Message-ID: <20031018175423.GA1038@renditai.milesteg.arr> (raw)
In-Reply-To: <20031016140644.GJ1659@openzaurus.ucw.cz>
On Thu, Oct 16, 2003 at 04:06:45PM +0200, Pavel Machek wrote:
> Look at the logs, perhaps you have an oops?
Trying with -test8 I keep getting my bash killed, but there is more, now
it seesms that the sis900 network driver broke, because after resume my
NIC does not work anymore and I get timeouts sending packets.
Here is a dmesg excerpt using pmdisk with all modules my system normally
uses (alsa, ipv6, irda, ohci, ehci, ntfs, yenta_socket):
--CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE--
Debug: sleeping function called from invalid context at include/asm/uaccess.h:473
in_atomic():0, irqs_disabled():1
Call Trace:
[<c011d1d0>] __might_sleep+0xa0/0xd0
[<c010bb2c>] save_v86_state+0x6c/0x200
[<c010946e>] work_notifysig_v86+0x6/0x14
[<c010941b>] syscall_call+0x7/0xb
Stopping tasks: ==========================================|
osl-0900 [2430] os_wait_semaphore : Failed to acquire semaphore[ddfe85a0|1|0], AE_TIME
Freeing memory: ............|
hdc: start_power_step(step: 0)
hdc: completing PM request, suspend
hda: start_power_step(step: 0)
hda: start_power_step(step: 1)
hda: complete_power_step(step: 1, stat: 50, err: 0)
hda: completing PM request, suspend
PM: Attempting to suspend to disk.
PM: snapshotting memory.
PM: Image restored successfully.
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
in_atomic():1, irqs_disabled():0
Call Trace:
[<c011d1d0>] __might_sleep+0xa0/0xd0
[<c022c1b0>] device_resume+0x20/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127083>] __mod_timer+0x123/0x170
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c01c44f3>] pci_set_power_state+0xd3/0x160
[<dea301a8>] usb_hcd_pci_resume+0x38/0x90 [usbcore]
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
ohci_hcd 0000:00:03.0: USB continue from host wakeup
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127083>] __mod_timer+0x123/0x170
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c01c44f3>] pci_set_power_state+0xd3/0x160
[<dea301a8>] usb_hcd_pci_resume+0x38/0x90 [usbcore]
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
ohci_hcd 0000:00:03.1: USB continue from host wakeup
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127083>] __mod_timer+0x123/0x170
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c01c44f3>] pci_set_power_state+0xd3/0x160
[<dea301a8>] usb_hcd_pci_resume+0x38/0x90 [usbcore]
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
ohci_hcd 0000:00:03.2: USB continue from host wakeup
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127083>] __mod_timer+0x123/0x170
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c01c44f3>] pci_set_power_state+0xd3/0x160
[<dea301a8>] usb_hcd_pci_resume+0x38/0x90 [usbcore]
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c01c44f3>] pci_set_power_state+0xd3/0x160
[<de9b3e9d>] yenta_dev_resume+0x2d/0xc0 [yenta_socket]
[<dea301c6>] usb_hcd_pci_resume+0x56/0x90 [usbcore]
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c026be6a>] socket_shutdown+0x4a/0x60
[<c026c39c>] socket_resume+0xbc/0x110
[<c026b722>] <4>Losing too many ticks!
TSC cannot be used as a timesource. (Are you running with SpeedStep?)
Falling back to a sane timesource.
pcmcia_socket_dev_resume+0xc2/0xe0
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c01c44f3>] pci_set_power_state+0xd3/0x160
[<de9b3e9d>] yenta_dev_resume+0x2d/0xc0 [yenta_socket]
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0127b93>] schedule_timeout+0x63/0xc0
[<c0127b20>] process_timeout+0x0/0x10
[<c026be6a>] socket_shutdown+0x4a/0x60
[<c026c39c>] socket_resume+0xbc/0x110
[<c026b722>] pcmcia_socket_dev_resume+0xc2/0xe0
[<c01c6914>] pci_device_resume+0x24/0x30
[<c022c127>] resume_device+0x27/0x30
[<c022c164>] dpm_resume+0x34/0x60
[<c022c1c3>] device_resume+0x33/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
hda: Wakeup request inited, waiting for !BSY...
hda: start_power_step(step: 1000)
blk: queue dddeb400, I/O limit 4095Mb (mask 0xffffffff)
hda: completing PM request, resume
hdc: Wakeup request inited, waiting for !BSY...
hdc: start_power_step(step: 1000)
hdc: completing PM request, resume
Restarting tasks...<3>bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c011b046>] wake_up_process+0x26/0x30
[<c01373a4>] thaw_processes+0xa4/0x100
[<c01f0f3d>] acpi_pm_finish+0x14/0x36
[<c01379e6>] finish+0x16/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
done
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0155202>] sys_write+0x42/0x70
[<c0109442>] work_resched+0x5/0x16
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c011ff36>] release_console_sem+0xc6/0xd0
[<c011fdbc>] printk+0x12c/0x180
[<c011cc37>] sys_sched_yield+0x87/0xd0
[<c0161158>] coredump_wait+0x38/0xa0
[<c01612cc>] do_coredump+0x10c/0x1f9
[<c0128af4>] send_signal+0x94/0x150
[<c0109625>] error_code+0x2d/0x38
[<c0109625>] error_code+0x2d/0x38
[<c01286c5>] __dequeue_signal+0xe5/0x190
[<c01287a5>] dequeue_signal+0x35/0x90
[<c012ab37>] get_signal_to_deliver+0x267/0x350
[<c01091c0>] do_signal+0x90/0x120
[<c0109442>] work_resched+0x5/0x16
[<c011ad9e>] recalc_task_prio+0x8e/0x1b0
[<c011baf9>] schedule+0x2f9/0x580
[<c0119d40>] do_page_fault+0x0/0x530
[<c0109287>] do_notify_resume+0x37/0x3c
[<c0109466>] work_notifysig+0x13/0x15
note: bash[2312] exited with preempt_count 1
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: over-current change on port 2
hub 1-0:1.0: over-current change on port 3
hub 1-0:1.0: over-current change on port 4
hub 1-0:1.0: over-current change on port 5
hub 1-0:1.0: over-current change on port 6
--CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE--
Please note that:
note: bash[2312] exited with preempt_count 1
that gets my bask exiting with a SEGFAULT
Now the dmesg output with only 2 modules (ipv6, md5) that I cuold not
unload:
--CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE--
Stopping tasks: =======================================|
osl-0900 [366] os_wait_semaphore : Failed to acquire semaphore[ddfe85a0|1|0], AE_TIME
Freeing memory: ........|
hdc: start_power_step(step: 0)
hdc: completing PM request, suspend
hda: start_power_step(step: 0)
hda: start_power_step(step: 1)
hda: complete_power_step(step: 1, stat: 50, err: 0)
hda: completing PM request, suspend
PM: Attempting to suspend to disk.
PM: snapshotting memory.
PM: Image restored successfully.
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
in_atomic():1, irqs_disabled():0
Call Trace:
[<c011d1d0>] __might_sleep+0xa0/0xd0
[<c022c1b0>] device_resume+0x20/0x50
[<c01379d8>] finish+0x8/0x40
[<c0138945>] pmdisk_free+0x5/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
hda: Wakeup request inited, waiting for !BSY...
hda: start_power_step(step: 1000)
blk: queue dddeb400, I/O limit 4095Mb (mask 0xffffffff)
hda: completing PM request, resume
hdc: Wakeup request inited, waiting for !BSY...
hdc: start_power_step(step: 1000)
hdc: completing PM request, resume
Restarting tasks...<3>bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c011b046>] wake_up_process+0x26/0x30
[<c01373a4>] thaw_processes+0xa4/0x100
[<c01f0f3d>] acpi_pm_finish+0x14/0x36
[<c01379e6>] finish+0x16/0x40
[<c0137b2e>] pm_suspend_disk+0x7e/0xc0
[<c0136fb1>] enter_state+0xa1/0xb0
[<c01370a7>] state_store+0x67/0x71
[<c01874da>] subsys_attr_store+0x3a/0x40
[<c01877bb>] flush_write_buffer+0x3b/0x50
[<c018782a>] sysfs_write_file+0x5a/0x70
[<c01877d0>] sysfs_write_file+0x0/0x70
[<c01550d8>] vfs_write+0xb8/0x130
[<c0155202>] sys_write+0x42/0x70
[<c010941b>] syscall_call+0x7/0xb
done
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c0155202>] sys_write+0x42/0x70
[<c0109442>] work_resched+0x5/0x16
bad: scheduling while atomic!
Call Trace:
[<c011bd6d>] schedule+0x56d/0x580
[<c011ff36>] release_console_sem+0xc6/0xd0
[<c011fdbc>] printk+0x12c/0x180
[<c011cc37>] sys_sched_yield+0x87/0xd0
[<c0161158>] coredump_wait+0x38/0xa0
[<c01612cc>] do_coredump+0x10c/0x1f9
[<c0128af4>] send_signal+0x94/0x150
[<c0109625>] error_code+0x2d/0x38
[<c0109625>] error_code+0x2d/0x38
[<c01286c5>] __dequeue_signal+0xe5/0x190
[<c01287a5>] dequeue_signal+0x35/0x90
[<c012ab37>] get_signal_to_deliver+0x267/0x350
[<c01091c0>] do_signal+0x90/0x120
[<c0109442>] work_resched+0x5/0x16
[<c011ad9e>] recalc_task_prio+0x8e/0x1b0
[<c011baf9>] schedule+0x2f9/0x580
[<c0119d40>] do_page_fault+0x0/0x530
[<c0109287>] do_notify_resume+0x37/0x3c
[<c0109466>] work_notifysig+0x13/0x15
note: bash[1042] exited with preempt_count 1
Losing too many ticks!
TSC cannot be used as a timesource. (Are you running with SpeedStep?)
Falling back to a sane timesource.
--CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE----CUT-HERE--
A lot less bad: errors, but still the bash gets killed and the network
card doesn't work. Probably it just need ifdown/ifup, but I didn't try.
I can send .config file on request (this mail is big enough).
Hope it helps, bye.
--
----------------------------------------
Daniele Venzano
Web: http://digilander.iol.it/webvenza/
next prev parent reply other threads:[~2003-10-18 17:54 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-08 19:47 Linux 2.6.0-test7 - stability freeze Linus Torvalds
2003-10-08 23:57 ` Linux 2.6.0-test7 - stability freeze (compile stats) John Cherry
2003-10-09 12:45 ` Linux 2.6.0-test7 - compile/boot success iain d broadfoot
2003-10-09 13:29 ` 2.6.0-test7 BLK_DEV_FD dependence on ISA breakage Mikael Pettersson
2003-10-09 14:05 ` Andrew Morton
2003-10-09 18:04 ` Anton Blanchard
2003-10-09 18:18 ` Arun Sharma
2003-10-09 20:21 ` Mikael Pettersson
2003-10-10 11:55 ` Geert Uytterhoeven
2003-10-13 4:52 ` Linux 2.6.0-test7 - stability freeze Rob Landley
2003-10-13 4:53 ` Deja vu Rob Landley
2003-10-13 17:34 ` Linux 2.6.0-test7 - stability freeze Olaf Hering
2003-10-13 20:50 ` gcc -msoft-float [Was: Linux 2.6.0-test7 - stability freeze] Sam Ravnborg
2003-10-14 8:12 ` Olaf Hering
2003-10-14 8:31 ` Arjan van de Ven
2003-10-14 8:50 ` Olaf Hering
2003-10-14 11:40 ` Linux 2.6.0-test7 - stability freeze Jakub Jelinek
2003-10-15 17:27 ` Linux 2.6.0-test7 - Suspend to Disk success Jonathan McDowell
2003-10-15 21:00 ` Daniele Venzano
2003-10-16 14:06 ` Pavel Machek
2003-10-18 17:35 ` Daniele Venzano
2003-10-18 17:54 ` Daniele Venzano [this message]
2003-10-18 18:01 ` Pavel Machek
2003-10-18 20:48 ` Daniele Venzano
2003-10-19 7:38 ` Daniele Venzano
2003-10-20 19:08 ` Patrick Mochel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031018175423.GA1038@renditai.milesteg.arr \
--to=webvenza@libero.it \
--cc=linux-kernel@vger.kernel.org \
--cc=mochel@osdl.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®