From: Roland Lezuo <roland.lezuo@chello.at>
To: linux-kernel@vger.kernel.org
Subject: 2.6.0-test8 mad clock rate drifts and sleeping function ...
Date: Thu, 23 Oct 2003 10:44:37 +0200 [thread overview]
Message-ID: <200310231044.46668.roland.lezuo@chello.at> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
I expirience enormous clock rates dirft since using 2.6.0-test8 (upgrade from
2.4) I can even hear it when xmms is playing a song it suddenlty speed up to
200% of normal speed, then normal speed for a while, then too slow for a
while...
And after just 12h of running system time was wrong by 12h, but I'm not
absoluty sure about this (time is not running away while writing this).
I also see this sleeping function called from invalid context at... messages
Thanks,
Roland Lezuo (please CC me)
dmesg output:
Linux version 2.6.0-test8 (root@academia) (gcc version 3.2.2) #1 Tue Oct 21
13:40:55 CEST 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000fb940
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa8e0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:6 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1737.957 MHz processor.
Console: colour VGA+ 80x25
Debug: sleeping function called from invalid context at
include/asm/semaphore.h:119
in_atomic():1, irqs_disabled():1
Call Trace:
[<c0120150>] __might_sleep+0xa0/0xd0
[<c0122dea>] acquire_console_sem+0x3a/0x60
[<c012303e>] register_console+0x9e/0x1d0
[<c02c1090>] vgacon_save_screen+0x0/0x90
[<c03f6e37>] con_init+0x1f7/0x250
[<c0105000>] _stext+0x0/0x60
[<c03f6202>] console_init+0x32/0x40
[<c03e26bb>] start_kernel+0xbb/0x160
[<c03e24c0>] unknown_bootoption+0x0/0x100
Memory: 514820k/524224k available (2245k kernel code, 8656k reserved, 692k
data, 328k init, 0k highmem)
Debug: sleeping function called from invalid context at mm/slab.c:1857
in_atomic():1, irqs_disabled():0
Call Trace:
[<c0120150>] __might_sleep+0xa0/0xd0
[<c0142d35>] kmem_cache_alloc+0x65/0x70
[<c0105000>] _stext+0x0/0x60
[<c0141e64>] kmem_cache_create+0x74/0x4c0
[<c03ee1e2>] mem_init+0x1b2/0x210
[<c0105000>] _stext+0x0/0x60
[<c03f085e>] kmem_cache_init+0x11e/0x2c0
[<c03e26cb>] start_kernel+0xcb/0x160
[<c03e24c0>] unknown_bootoption+0x0/0x100
Calibrating delay loop... 3416.06 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2100+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1737.0024 MHz.
..... host bus clock speed is 267.0234 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
00:00:01[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
00:00:01[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:1)
00:00:11[C] -> 2-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:1)
00:00:11[D] -> 2-21 -> IRQ 21
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:1)
00:00:05[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:1)
00:00:05[D] -> 2-19 -> IRQ 19
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1)
00:00:12[A] -> 2-23 -> IRQ 23
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
pty: 256 Unix98 ptys configured
request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP generic driver version 2.4.2
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xe0807f00, 00:e0:7d:a1:42:13, IRQ 18
eth0: Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L120AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63,
UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
mice: PS/2 mouse device common for all mice
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 328k freed
Adding 979956k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda4, internal journal
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 option and report if it works on your
machine.
PCI: Setting latency timer of device 0000:00:11.5 to 64
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
Debug: sleeping function called from invalid context at
include/asm/uaccess.h:473
in_atomic():0, irqs_disabled():1
Call Trace:
[<c0120150>] __might_sleep+0xa0/0xd0
[<c010d40a>] save_v86_state+0x6a/0x200
[<c010a49e>] work_notifysig_v86+0x6/0x14
[<c010a44b>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at
include/asm/uaccess.h:473
in_atomic():0, irqs_disabled():1
Call Trace:
[<c0120150>] __might_sleep+0xa0/0xd0
[<c010d40a>] save_v86_state+0x6a/0x200
[<c010ca67>] do_IRQ+0x117/0x160
[<c010a49e>] work_notifysig_v86+0x6/0x14
[<c010a44b>] syscall_call+0x7/0xb
lsmod:
Module Size Used by
ipt_MASQUERADE 2752 1
iptable_nat 20004 2 ipt_MASQUERADE
ip_conntrack 27680 2 ipt_MASQUERADE,iptable_nat
ip_tables 16336 2 ipt_MASQUERADE,iptable_nat
ppp_async 9728 1
snd_via82xx 17600 3
snd_ac97_codec 52420 1 snd_via82xx
snd_mpu401_uart 6016 1 snd_via82xx
snd_rawmidi 20928 1 snd_mpu401_uart
snd_pcm_oss 48772 1
snd_pcm 87552 3 snd_via82xx,snd_pcm_oss
snd_page_alloc 9220 2 snd_via82xx,snd_pcm
snd_mixer_oss 17344 1 snd_pcm_oss
snd_seq_oss 32576 0
snd_seq_midi_event 6272 1 snd_seq_oss
snd_seq 53360 4 snd_seq_oss,snd_seq_midi_event
snd_timer 22144 2 snd_pcm,snd_seq
snd_seq_device 6724 3 snd_rawmidi,snd_seq_oss,snd_seq
snd 44420 15
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_timer,snd_seq_device
soundcore 7040 2 snd
usbcore 97812 1
ide_scsi 12288 0
- --
PGP Key ID: 0xFCC9ED1E
http://members.chello.at/roland.lezuo/ <- l337 zup4 h4x0r 4nd c0d3r h0meb4se
root@server:/ >mount -t inetfs /dev/inet /mnt/tmp
root@server:/ >rm -rf /mnt/tmp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE/l5T95qlVDPzJ7R4RAuUZAJ4nHJyLzjdD4H2N3JlDXK5sQweZYwCfabqw
CLT4bt8hdDMvrJf9SLdmB1U=
=qORH
-----END PGP SIGNATURE-----
next reply other threads:[~2003-10-23 8:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-23 8:44 Roland Lezuo [this message]
2003-10-23 19:51 ` john stultz
2003-10-24 11:06 ` Roland Lezuo
2003-10-24 18:04 ` john stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200310231044.46668.roland.lezuo@chello.at \
--to=roland.lezuo@chello.at \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome