I just bought a Logitech Cordless MX Duo (the mouse is MX 700). In 2.6.0-test9, the small button above the wheel (that repeats one of the wheel buttons while it is held down) does not work properly. Just before repeating, a thumb-button press is read by X and then once again after the button is released. This functionality worked until 2.6.0-test6. I tracked the problem down to the attached patch, which must be applied in reverse to 2.6.0-test9 for correct MX 700 functionality. The mouse (reciever) is connected via USB. The mouse works correctly in all cases when it is connected via the PS/2 port. As a side note, while I was experiencing the problem in 2.6.0-test9, the very bottom small button beneath the wheel delivered signals to X as if it were button-1. After reverting 2.6.0-test9 with the attached patch (and in 2.6.0-test5), the lowest small button stopped giving any response. --Jonathan Thambidurai p.s. Please CC me as I don't subscribe to the list.