From: Erich von Sinnen <leitzentrale@telebel.de>
To: linux-kernel@vger.kernel.org
Subject: 2.6.0-test9: [8139too].[pmdisk] rmmod
Date: Sun, 2 Nov 2003 02:52:41 +0100 [thread overview]
Message-ID: <200311020252.42369.leitzentrale@telebel.de> (raw)
Hello!
Summary of bugs:
1) ifdown eth[0-2] && rmmod 8139too ends in:
kernel: unregister_netdevice: waiting for eth0 to become free. Usage
count=1
(endless loop, machine unusable)
2) echo -n disk > /sys/power/state
bad: scheduling while atomic!
kernel: [<d10a624f>] rtl8139_suspend+0x6f/0xa0 [8139too]
kernel: [pci_device_suspend+40/48] pci_device_suspend+0x28/0x30
The success story is: the kernel compiles, boots and does it's job. This
motherboard got tree rtl- network chips on board, two of them configured
and running. Now I'm playing with the suspend to disk features ...
First try as in 2) gives exactly tree Oops (full output below) while
trying
suspending the ether devices.
So rebooted, and tried over with unloading the 8139too module first.
pmdisk
worked(!) that way in test-3. But first look at this:
$ lsmod
Module Size Used by
sg 37336 0
sr_mod 17156 0
via686a 19272 0
eeprom 7016 0
i2c_sensor 2976 2 via686a,eeprom
i2c_dev 10400 0
i2c_viapro 6892 0
i2c_core 24840 5
via686a,eeprom,i2c_sensor,i2c_dev,i2c_viapro
longhaul 6704 0
sd_mod 14816 0
scsi_mod 116216 3 sg,sr_mod,sd_mod
ide_floppy 17728 0
ide_cd 39396 0
cdrom 33696 2 sr_mod,ide_cd
md5 3968 1
ipv6 247520 14
snd_seq_oss 32576 0
snd_seq_midi_event 7872 1 snd_seq_oss
snd_seq 53264 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 52292 0
snd_mixer_oss 17856 1 snd_pcm_oss
snd_via82xx 23776 0
snd_pcm 96932 2 snd_pcm_oss,snd_via82xx
snd_timer 24868 2 snd_seq,snd_pcm
snd_ac97_codec 49796 1 snd_via82xx
snd_page_alloc 11492 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7392 1 snd_via82xx
snd_rawmidi 24736 1 snd_mpu401_uart
snd_seq_device 7784 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 51300 12
snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9152 1 snd
ipt_REJECT 6176 1
ipt_multiport 1824 2
ipt_LOG 5280 7
ipt_limit 2304 23
ipt_state 1728 20
ipt_MASQUERADE 4264 1
iptable_nat 28556 2 ipt_MASQUERADE
ip_conntrack 39940 3 ipt_state,ipt_MASQUERADE,iptable_nat
iptable_filter 2624 1
ip_tables 20512 8
ipt_REJECT,ipt_multiport,ipt_LOG,ipt_limit,ipt_state,ipt_MASQUERADE,iptable_nat,iptable_filter
af_packet 21672 4
8139too 23008 0
mii 4928 1 8139too
crc32 4320 1 8139too
psmouse 16748 0
agpgart 31720 0
pcspkr 3460 0
thermal 19280 0
processor 21284 1 thermal
fan 5196 0
button 7928 0
battery 12012 0
ac 6668 0
uhci_hcd 31760 0
usbcore 107644 3 uhci_hcd
rtc 12440 0
The 8139too counter is zero while two of tree devices are up.
$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia]
(rev
05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
AC97
Audio Controller (rev 50)
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1
(rev
6a)
$ /etc/init.d/network stop
[no problems]
$ rmmod 8139too
Oct 31 20:58:09 denon /sbin/hotplug: arguments (net) env (OLDPWD=/
DEVPATH=/class/net/eth0 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTI
ON=remove PWD=/etc/hotplug SHLVL=1 HOME=/ INTERFACE=eth0 DEBUG=yes
SEQNUM=159 _=/bin/env)
Oct 31 20:58:09 denon /sbin/hotplug: invoke /etc/hotplug/net.agent ()
Oct 31 20:58:09 denon /sbin/hotplug: arguments (net) env (OLDPWD=/
DEVPATH=/class/net/eth1 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTI
ON=remove PWD=/etc/hotplug SHLVL=1 HOME=/ INTERFACE=eth1 DEBUG=yes
SEQNUM=160 _=/bin/env)
Oct 31 20:58:09 denon /sbin/hotplug: invoke /etc/hotplug/net.agent ()
Oct 31 20:58:09 denon /etc/hotplug/net.agent: NET remove event not
supported
Oct 31 20:58:09 denon /etc/hotplug/net.agent: NET remove event not
supported
Oct 31 20:58:19 denon kernel: unregister_netdevice: waiting for eth1 to
become free. Usage count = 1
Oct 31 20:58:20 denon modprobe: FATAL: Module /dev/:0 not found.
Oct 31 20:58:30 denon kernel: unregister_netdevice: waiting for eth1 to
become free. Usage count = 1
Oct 31 20:58:50 denon last message repeated 2 times
Oct 31 20:58:50 denon modprobe: FATAL: Module /dev/:0 not found.
Oct 31 20:59:00 denon kernel: unregister_netdevice: waiting for eth1 to
become free. Usage count = 1
Oct 31 20:59:31 denon last message repeated 3 times
Oct 31 20:59:41 denon kernel: unregister_netdevice: waiting for eth1 to
become free. Usage count = 1
Oct 31 20:59:46 denon sudo: chris : TTY=pts/4 ; PWD=/home/chris ;
USER=root ; COMMAND=/usr/bin/reboot
Oct 31 20:59:48 denon shutdown: shutting down for system reboot
[ fresh reboot, and now lets do a pmsuspend, eth0 and eth1 are up ]
Oct 31 20:45:49 denon kernel: Stopping tasks:
===================================================|
Oct 31 20:45:49 denon kernel: Freeing memory: .........................|
Oct 31 20:45:49 denon kernel: hdc: start_power_step(step: 0)
Oct 31 20:45:49 denon kernel: hdc: start_power_step(step: 1)
Oct 31 20:45:49 denon kernel: hdc: complete_power_step(step: 1, stat:
50,
err: 0)
Oct 31 20:45:49 denon kernel: hdc: completing PM request, suspend
Oct 31 20:45:49 denon kernel: bad: scheduling while atomic!
Oct 31 20:45:49 denon kernel: Call Trace:
Oct 31 20:45:49 denon kernel: [schedule+1494/1552] schedule+0x5d6/0x610
Oct 31 20:45:49 denon kernel: [<c011c4f6>] schedule+0x5d6/0x610
Oct 31 20:45:49 denon kernel: [__mod_timer+214/400]
__mod_timer+0xd6/0x190
Oct 31 20:45:49 denon kernel: [<c0126e16>] __mod_timer+0xd6/0x190
Oct 31 20:45:49 denon kernel: [schedule_timeout+88/192]
schedule_timeout+0x58/0xc0
Oct 31 20:45:50 denon kernel: [<c01278f8>] schedule_timeout+0x58/0xc0
Oct 31 20:45:50 denon kernel: [process_timeout+0/16]
process_timeout+0x0/0x10
Oct 31 20:45:50 denon kernel: [<c0127890>] process_timeout+0x0/0x10
Oct 31 20:45:50 denon kernel: [pci_set_power_state+217/352]
pci_set_power_state+0xd9/0x160
Oct 31 20:45:50 denon kernel: [<c01d7ee9>]
pci_set_power_state+0xd9/0x160
Oct 31 20:45:50 denon kernel: [__crc_ata_vlb_sync+462959/2583417]
rtl8139_suspend+0x6f/0xa0 [8139too]
Oct 31 20:45:51 denon kernel: [<d10a624f>] rtl8139_suspend+0x6f/0xa0
[8139too]
Oct 31 20:45:51 denon kernel: [pci_device_suspend+40/48]
pci_device_suspend+0x28/0x30
Oct 31 20:45:51 denon kernel: [<c01da028>] pci_device_suspend+0x28/0x30
Oct 31 20:45:52 denon kernel: [suspend_device+104/176]
suspend_device+0x68/0xb0
Oct 31 20:45:52 denon kernel: [<c0232378>] suspend_device+0x68/0xb0
Oct 31 20:45:52 denon kernel: [device_suspend+95/128]
device_suspend+0x5f/0x80
Oct 31 20:45:52 denon kernel: [<c023241f>] device_suspend+0x5f/0x80
Oct 31 20:45:52 denon kernel: [prepare+46/144] prepare+0x2e/0x90
Oct 31 20:45:52 denon kernel: [<c013805e>] prepare+0x2e/0x90
Oct 31 20:45:52 denon kernel: [pm_suspend_disk+6/176]
pm_suspend_disk+0x6/0xb0
Oct 31 20:45:52 denon kernel: [<c01380c6>] pm_suspend_disk+0x6/0xb0
Oct 31 20:45:52 denon kernel: [enter_state+133/144]
enter_state+0x85/0x90
Oct 31 20:45:52 denon kernel: [<c0136025>] enter_state+0x85/0x90
Oct 31 20:45:52 denon kernel: [state_store+102/105]
state_store+0x66/0x69
Oct 31 20:45:52 denon kernel: [<c0136116>] state_store+0x66/0x69
Oct 31 20:45:52 denon kernel: [subsys_attr_store+45/64]
subsys_attr_store+0x2d/0x40
Oct 31 20:45:52 denon kernel: [<c018b06d>] subsys_attr_store+0x2d/0x40
Oct 31 20:45:52 denon kernel: [flush_write_buffer+37/48]
flush_write_buffer+0x25/0x30
Oct 31 20:45:52 denon kernel: [<c018b2d5>] flush_write_buffer+0x25/0x30
Oct 31 20:45:52 denon kernel: [sysfs_write_file+56/80]
sysfs_write_file+0x38/0x50
Oct 31 20:45:52 denon kernel: [<c018b318>] sysfs_write_file+0x38/0x50
Oct 31 20:45:52 denon kernel: [vfs_write+186/240] vfs_write+0xba/0xf0
Oct 31 20:45:52 denon kernel: [<c01563ba>] vfs_write+0xba/0xf0
Oct 31 20:45:52 denon kernel: [sys_write+45/80] sys_write+0x2d/0x50
Oct 31 20:45:52 denon kernel: [<c015646d>] sys_write+0x2d/0x50
Oct 31 20:45:52 denon kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 31 20:45:52 denon kernel: [<c01091e7>] syscall_call+0x7/0xb
Oct 31 20:45:52 denon kernel:
Oct 31 20:45:52 denon kernel: bad: scheduling while atomic!
Oct 31 20:45:52 denon kernel: Call Trace:
Oct 31 20:45:52 denon kernel: [schedule+1494/1552] schedule+0x5d6/0x610
Oct 31 20:45:52 denon kernel: [<c011c4f6>] schedule+0x5d6/0x610
Oct 31 20:45:52 denon kernel: [__mod_timer+214/400]
__mod_timer+0xd6/0x190
Oct 31 20:45:52 denon kernel: [<c0126e16>] __mod_timer+0xd6/0x190
Oct 31 20:45:52 denon kernel: [schedule_timeout+88/192]
schedule_timeout+0x58/0xc0
Oct 31 20:45:52 denon kernel: [<c01278f8>] schedule_timeout+0x58/0xc0
Oct 31 20:45:52 denon kernel: [process_timeout+0/16]
process_timeout+0x0/0x10
Oct 31 20:45:52 denon kernel: [<c0127890>] process_timeout+0x0/0x10
Oct 31 20:45:52 denon kernel: [pci_set_power_state+217/352]
pci_set_power_state+0xd9/0x160
Oct 31 20:45:52 denon kernel: [<c01d7ee9>]
pci_set_power_state+0xd9/0x160
Oct 31 20:45:52 denon kernel: [__crc_ata_vlb_sync+462959/2583417]
rtl8139_suspend+0x6f/0xa0 [8139too]
Oct 31 20:45:52 denon kernel: [<d10a624f>] rtl8139_suspend+0x6f/0xa0
[8139too]
Oct 31 20:45:52 denon kernel: [pci_device_suspend+40/48]
pci_device_suspend+0x28/0x30
Oct 31 20:45:52 denon kernel: [<c01da028>] pci_device_suspend+0x28/0x30
Oct 31 20:45:52 denon kernel: [suspend_device+104/176]
suspend_device+0x68/0xb0
Oct 31 20:45:52 denon kernel: [<c0232378>] suspend_device+0x68/0xb0
Oct 31 20:45:52 denon kernel: [device_suspend+95/128]
device_suspend+0x5f/0x80
Oct 31 20:45:52 denon kernel: [<c023241f>] device_suspend+0x5f/0x80
Oct 31 20:45:52 denon kernel: [prepare+46/144] prepare+0x2e/0x90
Oct 31 20:45:52 denon kernel: [<c013805e>] prepare+0x2e/0x90
Oct 31 20:45:52 denon kernel: [pm_suspend_disk+6/176]
pm_suspend_disk+0x6/0xb0
Oct 31 20:45:52 denon kernel: [<c01380c6>] pm_suspend_disk+0x6/0xb0
Oct 31 20:45:52 denon kernel: [enter_state+133/144]
enter_state+0x85/0x90
Oct 31 20:45:52 denon kernel: [<c0136025>] enter_state+0x85/0x90
Oct 31 20:45:52 denon kernel: [state_store+102/105]
state_store+0x66/0x69
Oct 31 20:45:52 denon kernel: [<c0136116>] state_store+0x66/0x69
Oct 31 20:45:52 denon kernel: [subsys_attr_store+45/64]
subsys_attr_store+0x2d/0x40
Oct 31 20:45:52 denon kernel: [<c018b06d>] subsys_attr_store+0x2d/0x40
Oct 31 20:45:52 denon kernel: [flush_write_buffer+37/48]
flush_write_buffer+0x25/0x30
Oct 31 20:45:52 denon kernel: [<c018b2d5>] flush_write_buffer+0x25/0x30
Oct 31 20:45:52 denon kernel: [sysfs_write_file+56/80]
sysfs_write_file+0x38/0x50
Oct 31 20:45:52 denon kernel: [<c018b318>] sysfs_write_file+0x38/0x50
Oct 31 20:45:52 denon kernel: [vfs_write+186/240] vfs_write+0xba/0xf0
Oct 31 20:45:52 denon kernel: [<c01563ba>] vfs_write+0xba/0xf0
Oct 31 20:45:52 denon kernel: [sys_write+45/80] sys_write+0x2d/0x50
Oct 31 20:45:52 denon kernel: [<c015646d>] sys_write+0x2d/0x50
Oct 31 20:45:52 denon kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 31 20:45:52 denon kernel: [<c01091e7>] syscall_call+0x7/0xb
Oct 31 20:45:52 denon kernel:
Oct 31 20:45:52 denon kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x45E1
Oct 31 20:45:52 denon kernel: eth1: link up, 10Mbps, half-duplex, lpa
0x0000
Oct 31 20:45:52 denon kernel: hdc: Wakeup request inited, waiting for
!BSY...
Oct 31 20:45:52 denon kernel: hdc: start_power_step(step: 1000)
Oct 31 20:45:52 denon kernel: blk: queue c139b600, I/O limit 4095Mb
(mask
0xffffffff)
Oct 31 20:45:52 denon kernel: hdc: completing PM request, resume
Oct 31 20:45:52 denon kernel: Restarting tasks... done
Oct 31 20:45:54 denon modprobe: FATAL: Module /dev/apm_bios not found.
Oct 31 20:46:12 denon kernel: spurious 8259A interrupt: IRQ7.
$ /sbin/ifconfig --version
net-tools 1.60
ifconfig 1.42 (2001-04-13)
$ /sbin/modprobe-25 --version
module-init-tools version 0.9.13
--
Christoph Rudorff
Wuppertal
reply other threads:[~2003-11-02 1:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200311020252.42369.leitzentrale@telebel.de \
--to=leitzentrale@telebel.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®