From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262225AbTKDNr5 (ORCPT ); Tue, 4 Nov 2003 08:47:57 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262240AbTKDNr5 (ORCPT ); Tue, 4 Nov 2003 08:47:57 -0500 Received: from mcree.ikk.sztaki.hu ([193.225.87.6]:33975 "EHLO mcree.ikk.sztaki.hu") by vger.kernel.org with ESMTP id S262225AbTKDNrn (ORCPT ); Tue, 4 Nov 2003 08:47:43 -0500 From: Erno Rigo To: linux-kernel@vger.kernel.org Subject: Re: kernel: ata1: DMA timeout, stat 0x1 Date: Tue, 4 Nov 2003 14:48:43 +0100 User-Agent: KMail/1.5.4 Cc: jgarzik@redhat.com References: <200311041351.44607.mcree@freemail.hu> <200311041401.33726.mcree@freemail.hu> In-Reply-To: <200311041401.33726.mcree@freemail.hu> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311041448.43973.mcree@freemail.hu> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Tuesday 04 November 2003 14:01, Erno Rigo wrote: This is the first place where errors appear: CPU: AMD Athlon(TM) XP 2100+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 PCI: Found IRQ 11 for device 0000:00:0d.0 PCI: Sharing IRQ 11 with 0000:00:0d.1 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Found IRQ 3 for device 0000:00:0f.1 IRQ routing conflict for 0000:00:0f.0, have irq 9, want irq 3 IRQ routing conflict for 0000:00:10.0, have irq 9, want irq 3 IRQ routing conflict for 0000:00:10.1, have irq 9, want irq 3 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API pty: 256 Unix98 ptys configured > On Tuesday 04 November 2003 13:51, Erno Rigo wrote: > > Hmm... Additional information... > > libata version 0.75 loaded. > sata_via version 0.11 > PCI: Found IRQ 3 for device 0000:00:0f.0 > IRQ routing conflict for 0000:00:0f.0, have irq 9, want irq 3 > PCI: Sharing IRQ 3 with 0000:00:0f.1 > IRQ routing conflict for 0000:00:10.0, have irq 9, want irq 3 > IRQ routing conflict for 0000:00:10.1, have irq 9, want irq 3 > ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xB802 bmdma 0xA800 irq 9 > ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 9 > ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 > 88:407f > ata1: dev 0 ATA, max UDMA/133, 234441648 sectors (lba48) > ata1: dev 0 configured for UDMA/133 > scsi0 : sata_via > ATA: abnormal status 0x7F on port 0xB407 > ata2: thread exiting > scsi1 : sata_via > Vendor: ATA Model: ST3120026AS Rev: 0.75 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) > SCSI device sda: drive cache: write through > /dev/scsi/host0/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 > > > Hello! > > > > [1.] One line summary of the problem: > > > > kernel: ata1: DMA timeout, stat 0x1 > > > > [2.] Full description of the problem/report: > > > > I've just purchased a VIA KT600 based mainboard and a Seagate Barracuda > > 120G SATA drive. The controller and the drive is properly recognized, but > > after a while, independent of the workload, I get the above error, and > > the drive bails out. (It's unaccessible from the point I get the > > message). > > > > I've also tried the backport in 2.4.22-ac4, it's a bit more verbose, and > > complains about a 'scsi Media Sense error' before the dma timeout. > > > > [3.] Keywords (i.e., modules, networking, kernel): > > > > VIA, SATA > > > > [4.] Kernel version (from /proc/version): > > > > Linux version 2.6.0-test9 (root@mcree) (gcc version 3.3.2 20030908 > > (Debian prerelease)) #6 Tue Nov 4 13:11:19 CET 2003 > > > > [5.] Output of Oops.. message (if applicable) with symbolic information > > resolved (see Documentation/oops-tracing.txt) > > > > N/A > > > > [6.] A small shell script or example program which triggers the > > problem (if possible) > > > > Normal usage. (Sometimes I can cp tens of gigabytes, sometimes I can't > > even change to a directory) > > > > [7.] Environment > > [7.1.] Software (add the output of the ver_linux script here) > > > > Linux mcree 2.6.0-test9 #6 Tue Nov 4 13:11:19 CET 2003 i686 GNU/Linux > > > > Gnu C 3.3.2 > > Gnu make 3.80 > > util-linux 2.12 > > mount 2.12 > > module-init-tools 0.9.15-pre2 > > e2fsprogs 1.35-WIP > > Linux C Library 2.3.2 > > Dynamic linker (ldd) 2.3.2 > > Procps 3.1.12 > > Net-tools 1.60 > > Console-tools 0.2.3 > > Sh-utils 5.0.90 > > Modules Loaded > > > > [7.2.] Processor information (from /proc/cpuinfo): > > > > processor : 0 > > vendor_id : AuthenticAMD > > cpu family : 6 > > model : 8 > > model name : AMD Athlon(TM) XP 2100+ > > stepping : 1 > > cpu MHz : 1734.223 > > cache size : 256 KB > > fdiv_bug : no > > hlt_bug : no > > f00f_bug : no > > coma_bug : no > > fpu : yes > > fpu_exception : yes > > cpuid level : 1 > > wp : yes > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > > mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow > > bogomips : 3416.06 > > > > [7.3.] Module information (from /proc/modules): > > > > empty > > > > [7.4.] Loaded driver and hardware information (/proc/ioports, > > /proc/iomem) > > > > [root@mcree| /usr/src/linux-2.6.0-test9/scripts]#cat /proc/ioports > > 0000-001f : dma1 > > 0020-0021 : pic1 > > 0040-005f : timer > > 0060-006f : keyboard > > 0070-0077 : rtc > > 0080-008f : dma page reg > > 00a0-00a1 : pic2 > > 00c0-00df : dma2 > > 00f0-00ff : fpu > > 0170-0177 : ide1 > > 01f0-01f7 : ide0 > > 0376-0376 : ide1 > > 0378-037a : parport0 > > 03c0-03df : vga+ > > 03f6-03f6 : ide0 > > 03f8-03ff : serial > > 0cf8-0cff : PCI conf1 > > 8400-84ff : 0000:00:13.0 > > 8400-84ff : tulip > > 8800-881f : 0000:00:10.3 > > 9000-901f : 0000:00:10.2 > > 9400-941f : 0000:00:10.1 > > 9800-981f : 0000:00:10.0 > > a000-a00f : 0000:00:0f.1 > > a000-a007 : ide0 > > a008-a00f : ide1 > > a400-a4ff : 0000:00:0f.0 > > a400-a4ff : libata > > a800-a80f : 0000:00:0f.0 > > a800-a80f : libata > > b000-b003 : 0000:00:0f.0 > > b000-b003 : libata > > b400-b407 : 0000:00:0f.0 > > b400-b407 : libata > > b800-b803 : 0000:00:0f.0 > > b800-b803 : libata > > d000-d007 : 0000:00:0f.0 > > d000-d007 : libata > > d400-d43f : 0000:00:0e.0 > > d800-d8ff : 0000:00:09.0 > > > > [root@mcree| /usr/src/linux-2.6.0-test9/scripts]#cat /proc/iomem > > 00000000-0009d7ff : System RAM > > 0009d800-0009ffff : reserved > > 000a0000-000bffff : Video RAM area > > 000c0000-000c7fff : Video ROM > > 000f0000-000fffff : System ROM > > 00100000-1fffbfff : System RAM > > 00100000-0034aa64 : Kernel code > > 0034aa65-004195ff : Kernel data > > 1fffc000-1fffefff : ACPI Tables > > 1ffff000-1fffffff : ACPI Non-volatile Storage > > ea800000-ea8003ff : 0000:00:13.0 > > ea800000-ea8003ff : tulip > > eb000000-eb0000ff : 0000:00:10.4 > > eb800000-eb803fff : 0000:00:09.0 > > ec000000-edefffff : PCI Bus #01 > > ec000000-ecffffff : 0000:01:00.0 > > ee000000-ee000fff : 0000:00:0d.1 > > ee800000-ee800fff : 0000:00:0d.0 > > ee800000-ee800fff : bttv0 > > ef700000-f7ffffff : PCI Bus #01 > > ef800000-ef87ffff : 0000:01:00.0 > > f0000000-f7ffffff : 0000:01:00.0 > > f8000000-fbffffff : 0000:00:00.0 > > fec00000-fec00fff : reserved > > fee00000-fee00fff : reserved > > ffff0000-ffffffff : reserved > > > > [7.5.] PCI information ('lspci -vvv' as root) > > > > [root@mcree| /usr/src/linux-2.6.0-test9/scripts]#lspci -vvv > > 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host > > Bridge (rev 80) > > Subsystem: Asustek Computer, Inc.: Unknown device 807f > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 0 > > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > > Capabilities: [80] AGP version 3.5 > > Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- > > HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 > > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > > Rate= > > Capabilities: [c0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b198 (prog-if > > 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 0 > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > I/O behind bridge: 0000e000-0000dfff > > Memory behind bridge: ec000000-edefffff > > Prefetchable memory behind bridge: ef700000-f7ffffff > > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:09.0 Ethernet controller: 3Com Corporation: Unknown device 1700 (rev > > 12) Subsystem: Asustek Computer, Inc.: Unknown device 80eb > > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32 (5750ns min, 7750ns max), cache line size 08 > > Interrupt: pin A routed to IRQ 5 > > Region 0: Memory at eb800000 (32-bit, non-prefetchable) > > [disabled] [size=16K] > > Region 1: I/O ports at d800 [disabled] [size=256] > > Capabilities: [48] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2 > > +,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=7 DScale=1 PME- > > Capabilities: [50] Vital Product Data > > > > 00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video > > Capture (rev 11) > > Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo > > receiver) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32 (4000ns min, 10000ns max) > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at ee800000 (32-bit, prefetchable) [size=4K] > > Capabilities: [44] Vital Product Data > > Capabilities: [4c] Power Management version 2 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > > (rev 11) > > Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo > > receiver, audio section) > > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32 (1000ns min, 63750ns max) > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at ee000000 (32-bit, prefetchable) [disabled] > > [size=4K] > > Capabilities: [44] Vital Product Data > > Capabilities: [4c] Power Management version 2 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) > > Subsystem: Ensoniq Creative Sound Blaster AudioPCI128 > > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > > SERR- > Latency: 32 (3000ns min, 32000ns max) > > Interrupt: pin A routed to IRQ 0 > > Region 0: I/O ports at d400 [disabled] [size=64] > > Capabilities: [dc] Power Management version 1 > > Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 > > (rev 80) > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32 > > Interrupt: pin A routed to IRQ 9 > > Region 0: I/O ports at d000 [size=8] > > Region 1: I/O ports at b800 [size=4] > > Region 2: I/O ports at b400 [size=8] > > Region 3: I/O ports at b000 [size=4] > > Region 4: I/O ports at a800 [size=16] > > Region 5: I/O ports at a400 [size=256] > > Capabilities: [c0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus > > Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32 > > Interrupt: pin A routed to IRQ 3 > > Region 4: I/O ports at a000 [size=16] > > Capabilities: [c0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 > > [UHCI]) > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32, cache line size 08 > > Interrupt: pin A routed to IRQ 9 > > Region 4: I/O ports at 9800 [size=32] > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > > PME(D0+,D1+,D2 +,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 > > [UHCI]) > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32, cache line size 08 > > Interrupt: pin A routed to IRQ 9 > > Region 4: I/O ports at 9400 [size=32] > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > > PME(D0+,D1+,D2 +,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 > > [UHCI]) > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32, cache line size 08 > > Interrupt: pin B routed to IRQ 11 > > Region 4: I/O ports at 9000 [size=32] > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > > PME(D0+,D1+,D2 +,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:10.3 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 > > [UHCI]) > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32, cache line size 08 > > Interrupt: pin B routed to IRQ 11 > > Region 4: I/O ports at 8800 [size=32] > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > > PME(D0+,D1+,D2 +,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if > > 20 [EHCI]) > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32, cache line size 08 > > Interrupt: pin C routed to IRQ 10 > > Region 0: Memory at eb000000 (32-bit, non-prefetchable) > > [size=256] Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > > PME(D0+,D1+,D2 +,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3227 > > Subsystem: Asustek Computer, Inc.: Unknown device 80ed > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping+ SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 0 > > Capabilities: [c0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:13.0 Ethernet controller: Accton Technology Corporation EN-1216 > > Ethernet Adapter (rev 11) > > Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 32 (63750ns min, 63750ns max), cache line size 08 > > Interrupt: pin A routed to IRQ 5 > > Region 0: I/O ports at 8400 [size=256] > > Region 1: Memory at ea800000 (32-bit, non-prefetchable) [size=1K] > > Expansion ROM at [disabled] [size=128K] > > Capabilities: [c0] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA > > PME(D0+,D1+,D2 +,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX > > 440] (rev a3) (prog-if 00 [VGA]) > > Subsystem: ABIT Computer Corp. Abit Siluro GeForce4MX440 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > SERR- > Latency: 64 (1250ns min, 250ns max) > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at ec000000 (32-bit, non-prefetchable) > > [size=16M] Region 1: Memory at f0000000 (32-bit, prefetchable) > > [size=128M] Region 2: Memory at ef800000 (32-bit, prefetchable) > > [size=512K] Expansion ROM at ef7e0000 [disabled] [size=128K] > > Capabilities: [60] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [44] AGP version 2.0 > > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- > > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > > Rate= > > > > [7.6.] SCSI information (from /proc/scsi/scsi) > > > > [root@mcree| /usr/src/linux-2.6.0-test9/scripts]#cat /proc/scsi/scsi > > Attached devices: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: ST3120026AS Rev: 0.75 > > Type: Direct-Access ANSI SCSI revision: 05 > > > > > > [7.7.] Other information that might be relevant to the problem > > (please look in /proc and include all information that you > > think to be relevant): > > > > [root@mcree| /usr/src/linux-2.6.0-test9/scripts]#hdparm > > /dev/scsi/host0/bus0/ target0/lun0/disc > > > > /dev/scsi/host0/bus0/target0/lun0/disc: > > readonly = 0 (off) > > > > (Hangs here in kernel mode - unable to kill -9 it) > > > > [X.] Other notes, patches, fixes, workarounds: > > > > Please CC your additional questions to mcree@freemail.hu, as I'm not on > > the kernel mailing list. -- McRee