Linux version 2.6.0-test9-ook (root@localhost.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #5 SMP Tue Nov 18 04:20:47 CST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000b7e0000 (usable) BIOS-e820: 000000000b7e0000 - 000000000b7f0000 (reserved) BIOS-e820: 000000000b7f0000 - 000000000b7f8000 (ACPI data) BIOS-e820: 000000000b7f8000 - 000000000b800000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 183MB LOWMEM available. On node 0 totalpages: 47072 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 42976 pages, LIFO batch:10 HighMem zone: 0 pages, LIFO batch:1 DMI not present. ACPI: RSDP (v000 IBM ) @ 0x000eab70 ACPI: RSDT (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f0000 ACPI: FADT (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f008c ACPI: BOOT (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f0030 ACPI: DBGP (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f0058 ACPI: DSDT (v001 IBM AXXXXXX4 0x00000001 MSFT 0x0100000c) @ 0x00000000 Building zonelist for node : 0 Kernel command line: ro root=/dev/hda1 Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 697.823 MHz processor. Console: colour VGA+ 80x25 Memory: 181736k/188288k available (2205k kernel code, 5932k reserved, 978k data, 152k init, 0k highmem) Calibrating delay loop... 1368.06 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 219k freed CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Celeron (Coppermine) stepping 06 per-CPU timeslice cutoff: 365.89 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Starting migration thread for cpu 0 CPUS done 8 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [PILA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILC] (IRQs 1 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [PILD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [PILF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [PILG] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILH] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILI] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 34) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [PILH] enabled at IRQ 11 ACPI: PCI Interrupt Link [PILC] enabled at IRQ 6 ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0 - using IRQ 15 ACPI: PCI Interrupt Link [PILD] enabled at IRQ 10 ACPI: PCI Interrupt Link [PILI] enabled at IRQ 10 ACPI: PCI Interrupt Link [PILA] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Machine check exception polling timer started. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2 C3) ACPI: Thermal Zone [THR2] (54 C) pty: 256 Unix98 ptys configured request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). Using anticipatory io scheduler Floppy drive(s): fd0 is unknown type 12 (usb?) floppy0: no floppy controllers found loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: IBM-DJSA-220, ATA DISK drive hdc: UJDA330, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/1874KiB Cache, CHS=38760/16/63 hda: hda1 hda2 hda3 hdc: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.12 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 ALSA device list: No soundcards found. NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S4 S5) EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 152k freed spurious 8259A interrupt: IRQ7. EXT3 FS on hda1, internal journal Unable to find swap-space signature kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Unable to find swap-space signature pcmcia_core: falsely claims to have parameter [8Áset_delay Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) Yenta: CardBus bridge found at 0000:00:0a.0 [12a3:ab01] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0000, PCI irq6 Socket status: 30000011 Yenta: CardBus bridge found at 0000:00:13.0 [1014:01a3] Yenta: ISA IRQ list 0838, PCI irq10 Socket status: 30000007 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x2c8-0x2cf 0x3c0-0x3df 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. Unable to handle kernel paging request at virtual address cc044120 printing eip: c0131bf3 *pde = 01276067 *pte = 00000000 Oops: 0002 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010246 EIP is at module_unload_init+0xe/0x52 eax: cc044120 ebx: cc036df0 ecx: cc043c20 edx: 00000000 esi: cc039cef edi: cc0436ff ebp: c4e1ff28 esp: c4e1ff28 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 920, threadinfo=c4e1e000 task=c4ba7310) Stack: c4e1ff9c c0133364 cc043c20 00000000 000003e8 cb015da0 cc013000 00000000 cc043c20 00000000 00000000 00000000 00000000 00000000 00000008 00000012 00000010 0000000c 00000000 00000000 00000018 00000017 00000019 cc0393e0 Call Trace: [] load_module+0x4d8/0x7f7 [] sys_init_module+0x77/0x234 [] sysenter_past_esp+0x52/0x71 Code: 89 81 00 05 00 00 89 81 04 05 00 00 89 c8 42 c7 80 00 01 00 Stopping tasks: ============================ stopping tasks failed (1 tasks remaining) Restarting tasks...<6> Strange, modprobe not stopped done