From: "Marco d'Itri" <md@Linux.IT>
To: Linus Torvalds <torvalds@osdl.org>
Cc: Kernel Mailing List <linux-kernel@vger.kernel.org>,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
Len Brown <len.brown@intel.com>, Andi Kleen <ak@muc.de>
Subject: Re: irq 15: nobody cared! with KT600 chipset and 2.6.0-test9
Date: Sun, 23 Nov 2003 19:52:53 +0100 [thread overview]
Message-ID: <20031123185253.GA1986@wonderland.linux.it> (raw)
In-Reply-To: <Pine.LNX.4.44.0311230829270.17378-100000@home.osdl.org>
On Nov 23, Linus Torvalds <torvalds@osdl.org> wrote:
>On Sun, 23 Nov 2003, Marco d'Itri wrote:
>>
>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>> hdc: IRQ probe failed (0x3cfa: 0). Guessing at 15
>> hdc: CD-ROM 50X, ATAPI CD/DVD-ROM drive
>> hdd: 32X10, ATAPI CD/DVD-ROM drive
>> Badness in request_irq at arch/i386/kernel/irq.c:572
>> Call Trace:
>> [<c021a770>] ide_intr+0x0/0x130
>
>There was nothing before this?
>
>The probe failed _before_ the first warning?
Yes.
>Does this one make a difference?
No:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
VIA8237SATA: chipset revision 128
VIA8237SATA: 100%% native mode on irq 3
ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100%% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080P0, ATA DISK drive
hdb: MAXTOR 6L040J2, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-ROM 50X, ATAPI CD/DVD-ROM drive
hdd: 32X10, ATAPI CD/DVD-ROM drive
Badness in request_irq at arch/i386/kernel/irq.c:572
Call Trace:
[<c021a770>] ide_intr+0x0/0x130
[<c010acfc>] request_irq+0xcc/0x100
[<c021bd06>] init_irq+0x156/0x400
[<c021a770>] ide_intr+0x0/0x130
[<c021c398>] hwif_init+0xb8/0x250
[<c021b9cc>] probe_hwif_init+0x2c/0x80
[<c022769a>] ide_setup_pci_device+0x7a/0x80
[<c021906d>] via_init_one+0x3d/0x50
[<c039791d>] ide_scan_pcidev+0x5d/0x70
[<c0397976>] ide_scan_pcibus+0x46/0xd0
[<c0397823>] probe_for_hwifs+0x13/0x20
[<c0397838>] ide_init_builtin_drivers+0x8/0x20
[<c0397898>] ide_init+0x48/0x70
[<c038674b>] do_initcalls+0x2b/0xa0
[<c01278f2>] init_workqueues+0x12/0x60
[<c0105097>] init+0x27/0x110
[<c0105070>] init+0x0/0x110
[<c01072a9>] kernel_thread_helper+0x5/0xc
irq 15: nobody cared!
Call Trace:
[<c010a92b>] __report_bad_irq+0x2b/0x90
[<c010aa24>] note_interrupt+0x64/0xa0
[<c010ac2a>] do_IRQ+0xea/0xf0
[<c01092a0>] common_interrupt+0x18/0x20
[<c011d104>] do_softirq+0x44/0xa0
[<c010ac11>] do_IRQ+0xd1/0xf0
[<c01092a0>] common_interrupt+0x18/0x20
[<c010b034>] setup_irq+0x64/0xb0
[<c021a770>] ide_intr+0x0/0x130
[<c010acb9>] request_irq+0x89/0x100
[<c021bd06>] init_irq+0x156/0x400
[<c021a770>] ide_intr+0x0/0x130
[<c021c398>] hwif_init+0xb8/0x250
[<c021b9cc>] probe_hwif_init+0x2c/0x80
[<c022769a>] ide_setup_pci_device+0x7a/0x80
[<c021906d>] via_init_one+0x3d/0x50
[<c039791d>] ide_scan_pcidev+0x5d/0x70
[<c0397976>] ide_scan_pcibus+0x46/0xd0
[<c0397823>] probe_for_hwifs+0x13/0x20
[<c0397838>] ide_init_builtin_drivers+0x8/0x20
[<c0397898>] ide_init+0x48/0x70
[<c038674b>] do_initcalls+0x2b/0xa0
[<c01278f2>] init_workqueues+0x12/0x60
[<c0105097>] init+0x27/0x110
[<c0105070>] init+0x0/0x110
[<c01072a9>] kernel_thread_helper+0x5/0xc
handlers:
[<c021a770>] (ide_intr+0x0/0x130)
Disabling IRQ #15
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
hdb: max request size: 128KiB
hdb: 78177792 sectors (40027 MB) w/1820KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
--
ciao, |
Marco | [3237 agt8As3FpLsEE]
next prev parent reply other threads:[~2003-11-23 18:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-22 23:55 Marco d'Itri
2003-11-23 1:21 ` Linus Torvalds
2003-11-23 1:59 ` Linus Torvalds
2003-11-23 2:15 ` Marco d'Itri
2003-11-23 3:24 ` Linus Torvalds
2003-11-23 5:49 ` Len Brown
2003-11-23 11:40 ` Marco d'Itri
2003-11-23 16:40 ` Linus Torvalds
2003-11-23 18:52 ` Marco d'Itri [this message]
2003-11-23 19:12 ` Linus Torvalds
2003-11-23 19:41 ` Marco d'Itri
-- strict thread matches above, loose matches on Subject: below --
2003-11-23 19:16 Brown, Len
[not found] <UPPL.70W.11@gated-at.bofh.it>
[not found] ` <UReK.uF.5@gated-at.bofh.it>
2003-11-23 3:39 ` Andi Kleen
2003-11-23 4:23 ` Linus Torvalds
2003-11-23 5:10 ` Andi Kleen
2003-11-23 10:29 ` Marco d'Itri
2003-11-15 10:43 Marco d'Itri
2003-11-16 11:13 ` Marco d'Itri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031123185253.GA1986@wonderland.linux.it \
--to=md@linux.it \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=ak@muc.de \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®