From: Amit Shah <shahamit@gmx.net>
To: linux-kernel@vger.kernel.org
Subject: SCSI: adaptec AIC7(3X): Badness in kobject_get at lib/kobject.c:439
Date: Tue, 25 Nov 2003 14:50:16 +0530 [thread overview]
Message-ID: <200311251450.16093.shahamit@gmx.net> (raw)
I'm running the 2.6.0-test10 release with CONFIG_PREEMPT=y.
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:4): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Badness in kobject_get at lib/kobject.c:439
Call Trace:
[<c01b62b0>] kobject_get+0x4c/0x4e
[<c0217342>] get_device+0x1a/0x23
[<c0244dc1>] scsi_device_get+0x2c/0x99
[<c0244ed3>] __scsi_iterate_devices+0x3f/0x84
[<c0248515>] scsi_run_host_queues+0x1b/0x45
[<c0266f39>] ahc_linux_release_simq+0x95/0xd7
[<c0263622>] ahc_linux_dv_thread+0x1f5/0x283
[<c026342d>] ahc_linux_dv_thread+0x0/0x283
[<c0108275>] kernel_thread_helper+0x5/0xb
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:4:0: Tagged Queuing enabled. Depth 32
PCI: Enabling device 0000:02:0b.0 (0116 -> 0117)
PCI: Unable to reserve mem region #2:1000@feaff000 for device 0000:02:0b.0
PCI: Unable to reserve mem region #2:1000@feaff000 for device 0000:02:0b.0
aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 2/11/0
aic7xxx: I/O ports already in use, ignoring.
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
SCSI device sda: drive cache: write back
sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 4, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 4, lun 0, type 0
Relevant part of the .config file is:
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_PROBE_EISA_VL=y
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
--
Amit Shah
http://amitshah.nav.to/
reply other threads:[~2003-11-25 9:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200311251450.16093.shahamit@gmx.net \
--to=shahamit@gmx.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®