mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: rene.rebe@gmx.net
To: linux-kernel@vger.kernel.org
Cc: jamesg@filanet.com, inux1394-devel@lists.sourceforge.net
Subject: ieee1394 / sbp2 problem accessing iBook in target disk mode
Date: Fri, 12 Dec 2003 01:12:02 +0100	[thread overview]
Message-ID: <200312120112.02778.rene.rebe@gmx.net> (raw)

Hi,

I tried to access another iBook in target disk mode via the sbp2 driver 
running a 2.4.22-benh2 kernel. The device (the other iBook) is detected but 
can not ba accessed properly:

ohci1394: $Rev: 1010 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40]  MMIO=[f5000000-f50007ff]  Max 
Packet=[2048]
ieee1394: Node added: ID:BUS[0-00:1023]  GUID[000a95fffeea7b48]
ieee1394: Host added: ID:BUS[0-01:1023]  GUID[000a95fffea13034]
ieee1394: unsolicited response packet received - np
ieee1394: contents: ffc10120 ffc07000 00000000 9ce61184
sbp2: $Rev: 1010 $ Ben Collins <bcollins@debian.org>
scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices
blk: queue e5fb0014, I/O limit 4095Mb (mask 0xffffffff)
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
scsi singledevice 3 0 0 0
scsi singledevice 1 0 0 0
  Vendor: AAPL      Model: FireWire Target   Rev: 0000
  Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue e5e0e214, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
ieee1394: sbp2: aborting sbp2 command
0x00 00 00 00 00 00 
sda: Unit Not Ready, sense:
Current 00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 
0x3a 0x00 0x00 0x00 0x00 0x00 
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 
0x3a 0x00 0x00 0x00 0x00 0x00 
sda : block size assumed to be 512 bytes, disk size 1GB.  
 /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
 I/O error: dev 08:00, sector 0
 unable to read partition table

Of course it works under MacOS-X and also networking via the eth1394 driver is 
working nicely between the two Linux iBooks.

Is this problem know or any ideas?

Sincerely yours,
  René Rebe
    - ROCK Linux stable release maintainer

--  
René Rebe - Europe/Germany/Berlin
  rene@rocklinux.org rene@rocklinux-consulting.de
http://www.rocklinux.org http://www.rocklinux-consulting.de
http://gsmp.rocklinux-consulting.de/ http://gsmp.tfh-berlin.de/rene



             reply	other threads:[~2003-12-12  0:12 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-12-12  0:12 rene.rebe [this message]
     [not found] ` <200312122232.hBCMWgdq032418@hirsch.in-berlin.de>
2003-12-21 19:24   ` Rene Rebe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200312120112.02778.rene.rebe@gmx.net \
    --to=rene.rebe@gmx.net \
    --cc=inux1394-devel@lists.sourceforge.net \
    --cc=jamesg@filanet.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®