From: Vojtech Pavlik <vojtech@suse.cz>
To: Bob <recbo@nishanet.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.0-test11 ps2 mouse giving corrupt data?
Date: Mon, 15 Dec 2003 17:49:33 +0100 [thread overview]
Message-ID: <20031215164933.GA8676@ucw.cz> (raw)
In-Reply-To: <3FDA8F5F.1030506@nishanet.com>
On Fri, Dec 12, 2003 at 11:02:39PM -0500, Bob wrote:
> Vojtech Pavlik wrote:
>
> >On Fri, Dec 12, 2003 at 12:36:38PM +0000, Andrew Walrond wrote:
> >
> >
> >>I have just switched from l2.4 to 2.6 on my thinkpad, and the mouse does
> >>something wierd when I boot into x (kde)
> >>
> >>startx, then wait for everything to load, then move mouse. Mouse goes
> >>crazy, menus pop up everywhere as though I were pressing buttons, and
> >>after about 3 seconds, it all settles down and works perfectly.
> >>
> >>
> >
> >Most likely X does something nasty to the keyboard controller while it
> >is starting up. The psmouse kernel driver has an autosync feature which
> >can get it out of trouble if you don't move the mouse for two seconds.
> >
> >
> When did the autosync feature arrive?
> It doesn't work for me(k2.6.11 with
> MSI K7N2 Delta nforce2 mboard
> and k2.6.11 with Shuttle Xpc SK41G
> FX41 mboard with VIA fsb) if ps2
> kvm switch(Belkin) is switched away.
2.5.something.
Now when your Belkin switch resets the mouse, the autosync will not
work, as it only compensates for lost bytes, not a complete protocol
change. Use 'psmouse_noext" on the kernel command line to disable wheel
handling and it'll work OK.
(Automatic mouse reinitialization is on the planned feature list.)
> When sync is lost on my pc's I have to
> reboot. Symptoms are the same, on X or
> text term--any mouse movement triggers
> selects and buttons down but the correct
> events do not occur.
>
> With a kvm switch k-2.6.? loses psmouse
> sync on the off pc. Rebooting is the only
> solution. I got tired of this and moved the
> mouse(logitech trackman fx) to one pc,
> so the other only has to boot with the
> mouse attached either to kvm or ps2
> port on pc. That's fine until moving the
> mouse back and forth for rebooting
> causes the pc with X running to lose
> sync. Then it can't regain sync.
>
> -Bob
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Vojtech Pavlik
SuSE Labs, SuSE CR
prev parent reply other threads:[~2003-12-15 16:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-12 12:36 Andrew Walrond
2003-12-12 14:15 ` Vojtech Pavlik
2003-12-13 4:02 ` Bob
2003-12-15 16:49 ` Vojtech Pavlik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031215164933.GA8676@ucw.cz \
--to=vojtech@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=recbo@nishanet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome