On Fri, Dec 19, 2003 at 09:24:56PM +0900, ryutaroh@it.ss.titech.ac.jp wrote:
> Hello,
> 
> I found a problem in drivers/input/keyboard/atkbd.c in Linux 2.6.0.
> 
> We cannot input | (bar) with the JP 106 keyboards (the standard Japanese
> keyboards). This is because the scancode 0x7d (125) is translated to
> the keycode 0xb7 (183). The scancode 0x7d corresponds to | (bar) on
> the JP 106 keyboard. In Linux 2.4.23, the scancode 0x7d (125) is
> translated to the keycode 0x7c (124). Scancodes and keycodes can be
> displayed by showkey(1).
> 
> The following patch makes the translation rule the same as that in
> Linux 2.4.23. We also have to update drivers/char/keyboard.c in order
> to get correct scancode.
> 
> If you send comments, please send them to
> ryutaroh@it.ss.titech.ac.jp. I don't subscribe LKML.

Can you try the attached patch?

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR