From: Michael Guntsche <mike@it-loops.com>
To: linux-kernel@vger.kernel.org
Subject: Re: Network problems with b44 in 2.6.0
Date: Mon, 29 Dec 2003 21:14:59 +0100 [thread overview]
Message-ID: <20031229211459.384b2de9.mike@it-loops.com> (raw)
Hi,
> As soon as I started the process, the following error messages started
> appearing in my syslog.
> b44: eth0: Link is down.
> b44: eth0: Link is up at 100 Mbps, full duplex.
> b44: eth0: Flow control is on for TX and on for RX.
> b44: eth0: Link is down.
I played around with various settings on my notebook and noticed that
setting the link to 10BaseT-HD gave me a troughput of ~900KB/s.
No error messages in syslog, but ifconfig is still showing lots of errors
and collisions.
eth0 Link encap:Ethernet HWaddr 00:C0:9F:23:FA:FC
inet addr:192.168.0.147 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:89558 errors:21031 dropped:0 overruns:0 frame:21031
TX packets:65585 errors:0 dropped:0 overruns:0 carrier:26
collisions:22559 txqueuelen:1000
RX bytes:99059807 (94.4 MiB) TX bytes:3306603 (3.1 MiB)
Interrupt:5
I got this after copying 20 MB from the gateway to the notebook.
/Michael
next reply other threads:[~2003-12-29 20:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-29 20:14 Michael Guntsche [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-12-30 9:25 Michael Guntsche
2003-12-29 17:00 Michael Guntsche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031229211459.384b2de9.mike@it-loops.com \
--to=mike@it-loops.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome