From: Jeff Sipek <jeffpc@optonline.net>
To: Vid Strpic <vms@bofhlet.net>, Matthew Mastracci <mmastrac@canada.com>
Cc: linux-kernel@vger.kernel.org
Subject: USB Digital Camera mount problem [WAS: Removable USB device contents cached after removal?]
Date: Thu, 01 Jan 2004 13:41:17 -0500 [thread overview]
Message-ID: <200401011341.23379.jeffpc@optonline.net> (raw)
In-Reply-To: <20040101114824.GG2432@home.bofhlet.net>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Thursday 01 January 2004 06:48, Vid Strpic wrote:
> > 9. dd if=/dev/sdd1 of=/dev/null results in "No medium found"
>
> usb-storage behaves differently in 2.6 than in 2.4, maybe this is the
> problem for you now.
I get "No medium found" when I try to mount the SD card inside my digital
camera (Panasonic DMC-LC33.) It works fine in 2.4.18 that comes with Debian,
but I get the above message in 2.6.0 (and couple of releases before it - it
is a fairly new camera, ~2 months old.)
Any ideas how to debug it?
Jeff.
When plugged in:
kernel: hub 2-2:1.0: new USB device on port 4, assigned address 3
kernel: Initializing USB Mass Storage driver...
kernel: scsi1 : SCSI emulation for USB Mass Storage devices
kernel: Vendor: MATSHITA Model: DMC-LC33 Rev: 0100
kernel: Type: Direct-Access ANSI SCSI revision: 02
kernel: SCSI device sda: 246017 512-byte hdwr sectors (126 MB)
kernel: sda: Write Protect is off
kernel: sda: Mode Sense: 00 06 00 00
kernel: sda: assuming drive cache: write through
kernel: sda: sda1
kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
kernel: Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
kernel: WARNING: USB Mass Storage data integrity not assured
kernel: USB Mass Storage device found at 3
kernel: drivers/usb/core/usb.c: registered new driver usb-storage
kernel: USB Mass Storage support registered.
scsi.agent[22366]: disk at /devices/pci0000:00/0000:00:1f.4/
usb2/2-2/2-2.4/2-2.4:1.0/host1/1:0:0:0
When I try to mount it, mount refuses, but there are no log messages:
jeff:~# mount /dev/sda1 /mnt/camera/
mount: No medium found
jeff:~#
And when I shut the camera off, I get:
kernel: usb 2-2.4: USB disconnect, address 3
The modules:
jeff:~# lsmod
Module Size Used by
usb_storage 34688 0
nvidia 1704492 10
tvaudio 21888 0
msp3400 22928 0
bttv 140704 1
video_buf 22400 1 bttv
i2c_algo_bit 10248 1 bttv
btcx_risc 5252 1 bttv
v4l2_common 5376 1 bttv
videodev 10368 2 bttv
uhci_hcd 31240 0
usbcore 109012 4 usb_storage,uhci_hcd
evdev 10496 0
tuner 15108 0
i2c_core 24964 5 tvaudio,msp3400,bttv,i2c_algo_bit,tuner
eepro100 31244 0
mii 5632 1 eepro100
- --
You measure democracy by the freedom it gives its dissidents, not the
freedom it gives its assimilated conformists.
- Abbie Hoffman
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/9GnRwFP0+seVj/4RAnrCAJ92Kp6vkMobqPFnPzxs+HZIeD49rwCgneQf
n3u1o/SmRVOSJMi+IuBjn6g=
=lYLk
-----END PGP SIGNATURE-----
prev parent reply other threads:[~2004-01-01 18:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-01 11:48 Removable USB device contents cached after removal? Vid Strpic
2004-01-01 18:41 ` Jeff Sipek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200401011341.23379.jeffpc@optonline.net \
--to=jeffpc@optonline.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mmastrac@canada.com \
--cc=vms@bofhlet.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®