Linux version 2.6.0-test11 (root@deekin) (gcc version 3.2.2) #2 Tue Jan 6 13:38:28 CET 2004
BIOS-provided physical RAM map:
 BIOS-88: 0000000000000000 - 000000000009f000 (usable)
 BIOS-88: 0000000000100000 - 0000000001400000 (usable)
20MB LOWMEM available.
On node 0 totalpages: 5120
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 1024 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=Linux ro root=303 aha152x=0x140,12
Initializing CPU#0
PID hash table entries: 128 (order 7: 1024 bytes)
Console: colour VGA+ 80x25
Memory: 17696k/20480k available (1460k kernel code, 2348k reserved, 450k data, 100k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 65.15 BogoMIPS
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 00000001 00000000 00000000 00000000
CPU:     After vendor identify, caps: 00000001 00000000 00000000 00000000
CPU:     After all inits, caps: 00000001 00000000 00000000 00000000
CPU: AMD Am5x86-WT stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
isapnp: Scanning for PnP cards...
pnp: SB audio device quirk - increasing port range
isapnp: Card 'Creative ViBRA16X PnP'
isapnp: 1 Plug & Play card detected total
pty: 256 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x280: 00 00 21 6c 14 1d
eth0: NE2000 found at 0x280, using IRQ 10.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
hda: ST33221A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 6303024 sectors (3227 MB) w/128KiB Cache, CHS=6253/16/63
 hda: hda1 hda2 hda3
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x: resetting bus...
aha152x0: vital data: rev=1, io=0x140 (0x140/0x140), irq=12, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=1000, extended translation=disabled
aha152x0: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 2.5 $
(scsi0:2:0) 01 03 01 32 08 00 
  Vendor: MATSHITA  Model: PD-2 LF-D100      Rev: A113
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 0x/0x dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0,  type 5
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 100k freed
spurious 8259A interrupt: IRQ7.
Adding 64504k swap on /dev/hda2.  Priority:-1 extents:1
EXT3 FS on hda3, internal journal
Real Time Clock Driver v1.12
pnp: Device 00:01.00 activated.