From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265277AbUAJRce (ORCPT ); Sat, 10 Jan 2004 12:32:34 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265278AbUAJRce (ORCPT ); Sat, 10 Jan 2004 12:32:34 -0500 Received: from mailgate5.cinetic.de ([217.72.192.165]:62156 "EHLO mailgate5.cinetic.de") by vger.kernel.org with ESMTP id S265277AbUAJRcI (ORCPT ); Sat, 10 Jan 2004 12:32:08 -0500 Date: Sat, 10 Jan 2004 18:32:07 +0100 Message-Id: <200401101732.i0AHW7Q18932@mailgate5.cinetic.de> MIME-Version: 1.0 Organization: http://freemail.web.de/ From: To: linux-kernel@vger.kernel.org Subject: Mistake in Documentation/cdrom/ide-cd Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I have found some mistakes in the documentation. Here's a diff to fix it. It applies for 2.6.1 as well as 2.4.24. --- Documentation/cdrom/ide-cd 2003-12-31 05:48:00.000000000 +0100 +++ Documentation/myfile.txt 2004-01-10 17:18:54.000000000 +0100 @@ -74,7 +74,7 @@ 3. The CDROM drive should be connected to the host on an IDE interface. Each interface on a system is defined by an I/O port address and an IRQ number, the standard assignments being - 0x170 and 14 for the primary interface and 0x1f0 and 15 for the + 0x1f0 and 14 for the primary interface and 0x170 and 15 for the secondary interface. Each interface can control up to two devices, where each device can be a hard drive, a CDROM drive, a floppy drive, or a tape drive. The two devices on an interface are called `master' @@ -268,8 +268,8 @@ - Double-check your hardware configuration to make sure that the IRQ number of your IDE interface matches what the driver expects. - (The usual assignments are 14 for the primary (0x170) interface - and 15 for the secondary (0x1f0) interface.) Also be sure that + (The usual assignments are 14 for the primary (0x1f0) interface + and 15 for the secondary (0x170) interface.) Also be sure that you don't have some other hardware which might be conflicting with the IRQ you're using. Also check the BIOS setup for your system; some have the ability to disable individual IRQ levels, and I've Regards, David -- www.gnu.org | http://waste.informatik.hu-berlin.de/Grassmuck/Texts/drm-fiffko.html www.againsttcpa.com | www.debian.org | www.mozilla.org | www.xiph.org ______________________________________________________________________________ Erdbeben im Iran: Zehntausende Kinder brauchen Hilfe. UNICEF hilft den Kindern - helfen Sie mit! https://www.unicef.de/spe/spe_03.php