From: Adrian Bunk <bunk@fs.tum.de>
To: Christoph Hellwig <hch@infradead.org>,
Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, James Manning <jmm@sublogic.com>,
Andries Brouwer <aebr@win.tue.nl>
Subject: Re: [PATCH] linux-2.6.0-test3 - remove a few remaining "make dep" references (fwd)
Date: Sun, 18 Jan 2004 19:09:48 +0100 [thread overview]
Message-ID: <20040118180947.GD12027@fs.tum.de> (raw)
In-Reply-To: <20040115134906.A11703@infradead.org>
On Thu, Jan 15, 2004 at 01:49:06PM +0000, Christoph Hellwig wrote:
> On Thu, Jan 15, 2004 at 02:05:56PM +0100, Adrian Bunk wrote:
> > #
> > -# Note! Dependencies are done automagically by 'make dep', which also
> > -# removes any old dependencies. DON'T put your own dependencies here
> > +# Note! DON'T put your own dependencies here
> > # unless it's something special (ie not a .c file).
>
> What about killing this whole boilerplate? While it's strictly speaking
> not incorrect I don't think it's a good idea to have it repeated all over
> the place.
Thanks for this suggestion.
An updated patch is below.
diffstat output:
Documentation/networking/arcnet.txt | 1 -
arch/arm/kernel/Makefile | 2 +-
arch/mips/kernel/gdb-stub.c | 2 +-
arch/arm26/mm/Makefile | 7 -------
arch/h8300/mm/Makefile | 5 -----
arch/h8300/platform/h8300h/Makefile | 4 ----
arch/h8300/platform/h8300h/aki3068net/Makefile | 4 ----
arch/h8300/platform/h8300h/generic/Makefile | 4 ----
arch/h8300/platform/h8300h/h8max/Makefile | 4 ----
arch/h8300/platform/h8s/Makefile | 4 ----
arch/h8300/platform/h8s/edosk2674/Makefile | 4 ----
arch/h8300/platform/h8s/generic/Makefile | 4 ----
arch/i386/mach-voyager/Makefile | 5 -----
arch/mips/au1000/common/Makefile | 4 ----
arch/mips/au1000/db1x00/Makefile | 4 ----
arch/mips/au1000/pb1000/Makefile | 4 ----
arch/mips/au1000/pb1100/Makefile | 4 ----
arch/mips/au1000/pb1500/Makefile | 4 ----
arch/mips/tx4927/common/Makefile | 4 ----
arch/sh/boards/adx/Makefile | 4 ----
arch/sh/boards/bigsur/Makefile | 4 ----
arch/sh/boards/cat68701/Makefile | 4 ----
arch/sh/boards/cqreek/Makefile | 4 ----
arch/sh/boards/dmida/Makefile | 4 ----
arch/sh/boards/dreamcast/Makefile | 4 ----
arch/sh/boards/ec3104/Makefile | 4 ----
arch/sh/boards/harp/Makefile | 4 ----
arch/sh/boards/hp6xx/hp620/Makefile | 4 ----
arch/sh/boards/hp6xx/hp680/Makefile | 4 ----
arch/sh/boards/hp6xx/hp690/Makefile | 4 ----
arch/sh/boards/mpc1211/Makefile | 4 ----
arch/sh/boards/overdrive/Makefile | 4 ----
arch/sh/boards/saturn/Makefile | 4 ----
arch/sh/boards/se/770x/Makefile | 4 ----
arch/sh/boards/se/7751/Makefile | 4 ----
arch/sh/boards/sh2000/Makefile | 4 ----
arch/sh/boards/unknown/Makefile | 4 ----
arch/sh/cchips/hd6446x/hd64461/Makefile | 4 ----
arch/sh/cchips/hd6446x/hd64465/Makefile | 4 ----
drivers/video/i810/Makefile | 6 ------
fs/befs/Makefile | 6 ------
net/ipv4/ipvs/Makefile | 6 ------
42 files changed, 2 insertions(+), 170 deletions(-)
cu
Adrian
--- linux-2.6.0-test3.orig/Documentation/networking/arcnet.txt Sat Aug 9 00:31:44 2003
+++ linux-2.6.0-test3/Documentation/networking/arcnet.txt Mon Aug 11 00:35:29 2003
@@ -186,7 +186,6 @@
to the chipset support if you wish.
make config
- make dep
make clean
make zImage
make modules
--- linux-2.6.0-test3.orig/arch/arm/kernel/Makefile Sat Aug 9 00:40:56 2003
+++ linux-2.6.0-test3/arch/arm/kernel/Makefile Mon Aug 11 00:29:32 2003
@@ -32,7 +32,7 @@
extra-y := $(head-y) init_task.o
-# Spell out some dependencies that `make dep' doesn't spot
+# Spell out some dependencies that aren't automatically figured out
$(obj)/entry-armv.o: $(obj)/entry-header.S include/asm-arm/constants.h
$(obj)/entry-armo.o: $(obj)/entry-header.S include/asm-arm/constants.h
$(obj)/entry-common.o: $(obj)/entry-header.S include/asm-arm/constants.h \
--- linux-2.6.1-mm4/arch/arm26/mm/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/arm26/mm/Makefile 2004-01-18 18:59:52.000000000 +0100
@@ -1,12 +1,5 @@
#
# Makefile for the linux arm26-specific parts of the memory manager.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-# Object file lists.
obj-y := init.o extable.o proc-funcs.o mm-memc.o fault.o
--- linux-2.6.1-mm4/arch/h8300/mm/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/mm/Makefile 2004-01-18 18:59:58.000000000 +0100
@@ -1,10 +1,5 @@
#
# Makefile for the linux m68k-specific parts of the memory manager.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
obj-y := init.o fault.o memory.o kmap.o extable.o
--- linux-2.6.1-mm4/arch/h8300/platform/h8300h/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/platform/h8300h/Makefile 2004-01-18 19:00:06.000000000 +0100
@@ -6,10 +6,6 @@
#VPATH := $(VPATH):$(BOARD)
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
.S.o:
$(CC) -D__ASSEMBLY__ $(AFLAGS) -I. -c $< -o $*.o
--- linux-2.6.1-mm4/arch/h8300/platform/h8300h/aki3068net/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/platform/h8300h/aki3068net/Makefile 2004-01-18 19:00:12.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
extra-y := crt0_ram.o
obj-y := timer.o
--- linux-2.6.1-mm4/arch/h8300/platform/h8300h/generic/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/platform/h8300h/generic/Makefile 2004-01-18 19:00:16.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := timer.o
extra-y = crt0_$(MODEL).o
--- linux-2.6.1-mm4/arch/h8300/platform/h8300h/h8max/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/platform/h8300h/h8max/Makefile 2004-01-18 19:00:20.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
extra-y := crt0_ram.o
obj-y := timer.o
--- linux-2.6.1-mm4/arch/h8300/platform/h8s/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/platform/h8s/Makefile 2004-01-18 19:00:27.000000000 +0100
@@ -6,10 +6,6 @@
#VPATH := $(VPATH):$(BOARD)
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
.S.o:
$(CC) -D__ASSEMBLY__ $(AFLAGS) -I. -c $< -o $*.o
--- linux-2.6.1-mm4/arch/h8300/platform/h8s/edosk2674/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/platform/h8s/edosk2674/Makefile 2004-01-18 19:00:33.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
extra-y := crt0_ram.o
obj-y := timer.o
--- linux-2.6.1-mm4/arch/h8300/platform/h8s/generic/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/h8300/platform/h8s/generic/Makefile 2004-01-18 19:00:38.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
extra-y = crt0_$(MODEL).o
obj-y := timer.o
--- linux-2.6.1-mm4/arch/i386/mach-voyager/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/i386/mach-voyager/Makefile 2004-01-18 19:00:43.000000000 +0100
@@ -1,11 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_CFLAGS += -I../kernel
obj-y := setup.o voyager_basic.o voyager_thread.o
--- linux-2.6.1-mm4/arch/mips/au1000/common/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/mips/au1000/common/Makefile 2004-01-18 19:00:48.000000000 +0100
@@ -5,10 +5,6 @@
#
# Makefile for the Alchemy Au1000 CPU, generic files.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y += prom.o int-handler.o dma.o irq.o puts.o \
time.o reset.o clocks.o power.o
--- linux-2.6.1-mm4/arch/mips/au1000/db1x00/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/mips/au1000/db1x00/Makefile 2004-01-18 19:00:57.000000000 +0100
@@ -5,10 +5,6 @@
#
# Makefile for the Alchemy Semiconductor PB1000 board.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
.S.s:
$(CPP) $(CFLAGS) $< -o $*.s
--- linux-2.6.1-mm4/arch/mips/au1000/pb1000/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/mips/au1000/pb1000/Makefile 2004-01-18 19:01:04.000000000 +0100
@@ -5,10 +5,6 @@
#
# Makefile for the Alchemy Semiconductor PB1000 board.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
USE_STANDARD_AS_RULE := true
--- linux-2.6.1-mm4/arch/mips/au1000/pb1100/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/mips/au1000/pb1100/Makefile 2004-01-18 19:01:12.000000000 +0100
@@ -5,10 +5,6 @@
#
# Makefile for the Alchemy Semiconductor Pb1100 board.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
USE_STANDARD_AS_RULE := true
--- linux-2.6.1-mm4/arch/mips/au1000/pb1500/Makefile.old 2004-01-18 18:59:31.000000000 +0100
+++ linux-2.6.1-mm4/arch/mips/au1000/pb1500/Makefile 2004-01-18 19:01:21.000000000 +0100
@@ -5,9 +5,5 @@
#
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
lib-y := init.o setup.o
--- linux-2.6.0-test3.orig/arch/mips/kernel/gdb-stub.c Sat Aug 9 00:42:17 2003
+++ linux-2.6.0-test3/arch/mips/kernel/gdb-stub.c Mon Aug 11 00:29:16 2003
@@ -95,7 +95,7 @@
* Example:
* $ cd ~/linux
* $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- * $ make dep; make vmlinux
+ * $ make
*
* Step 3:
* Download the kernel to the remote target and start
--- linux-2.6.1-mm4/arch/mips/tx4927/common/Makefile.old 2004-01-18 19:03:57.000000000 +0100
+++ linux-2.6.1-mm4/arch/mips/tx4927/common/Makefile 2004-01-18 19:04:25.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for common code for Toshiba TX4927 based systems
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := tx4927_prom.o
obj-y += tx4927_setup.o
--- linux-2.6.1-mm4/arch/sh/boards/adx/Makefile.old 2004-01-18 19:03:57.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/adx/Makefile 2004-01-18 19:04:37.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for ADX boards
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o irq.o irq_maskreq.o
--- linux-2.6.1-mm4/arch/sh/boards/bigsur/Makefile.old 2004-01-18 19:03:57.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/bigsur/Makefile 2004-01-18 19:04:46.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the BigSur specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o io.o irq.o led.o
--- linux-2.6.1-mm4/arch/sh/boards/cat68701/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/cat68701/Makefile 2004-01-18 19:04:50.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the CAT-68701 specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o irq.o
--- linux-2.6.1-mm4/arch/sh/boards/cqreek/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/cqreek/Makefile 2004-01-18 19:04:54.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the CqREEK specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o irq.o
--- linux-2.6.1-mm4/arch/sh/boards/dmida/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/dmida/Makefile 2004-01-18 19:04:58.000000000 +0100
@@ -2,10 +2,6 @@
# Makefile for the DataMyte Industrial Digital Assistant(tm) specific parts
# of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o
--- linux-2.6.1-mm4/arch/sh/boards/dreamcast/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/dreamcast/Makefile 2004-01-18 19:05:02.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the Sega Dreamcast specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o irq.o rtc.o
--- linux-2.6.1-mm4/arch/sh/boards/ec3104/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/ec3104/Makefile 2004-01-18 19:05:07.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the EC3104 specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o io.o irq.o
--- linux-2.6.1-mm4/arch/sh/boards/harp/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/harp/Makefile 2004-01-18 19:05:11.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for STMicroelectronics board specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := irq.o setup.o mach.o led.o
--- linux-2.6.1-mm4/arch/sh/boards/hp6xx/hp620/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/hp6xx/hp620/Makefile 2004-01-18 19:05:15.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the HP620 specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o
--- linux-2.6.1-mm4/arch/sh/boards/hp6xx/hp680/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/hp6xx/hp680/Makefile 2004-01-18 19:05:19.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the HP680 specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o
--- linux-2.6.1-mm4/arch/sh/boards/hp6xx/hp690/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/hp6xx/hp690/Makefile 2004-01-18 19:05:25.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the HP690 specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o
--- linux-2.6.1-mm4/arch/sh/boards/mpc1211/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/mpc1211/Makefile 2004-01-18 19:05:28.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o rtc.o led.o
--- linux-2.6.1-mm4/arch/sh/boards/overdrive/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/overdrive/Makefile 2004-01-18 19:05:32.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the STMicroelectronics Overdrive specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o setup.o io.o irq.o led.o time.o
--- linux-2.6.1-mm4/arch/sh/boards/saturn/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/saturn/Makefile 2004-01-18 19:05:36.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the Sega Saturn specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o io.o irq.o
--- linux-2.6.1-mm4/arch/sh/boards/se/770x/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/se/770x/Makefile 2004-01-18 19:05:40.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the 770x SolutionEngine specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o setup.o io.o irq.o led.o
--- linux-2.6.1-mm4/arch/sh/boards/se/7751/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/se/7751/Makefile 2004-01-18 19:05:44.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the 7751 SolutionEngine specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o setup.o io.o irq.o led.o
--- linux-2.6.1-mm4/arch/sh/boards/sh2000/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/sh2000/Makefile 2004-01-18 19:05:47.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the SH2000 specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o
--- linux-2.6.1-mm4/arch/sh/boards/unknown/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/boards/unknown/Makefile 2004-01-18 19:05:51.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for unknown SH boards
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := mach.o io.o setup.o
--- linux-2.6.1-mm4/arch/sh/cchips/hd6446x/hd64461/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/cchips/hd6446x/hd64461/Makefile 2004-01-18 19:05:54.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the HD64461
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o io.o
--- linux-2.6.1-mm4/arch/sh/cchips/hd6446x/hd64465/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/arch/sh/cchips/hd6446x/hd64465/Makefile 2004-01-18 19:05:58.000000000 +0100
@@ -1,10 +1,6 @@
#
# Makefile for the HD64465
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o io.o gpio.o
--- linux-2.6.1-mm4/drivers/video/i810/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/drivers/video/i810/Makefile 2004-01-18 19:06:04.000000000 +0100
@@ -1,12 +1,6 @@
#
# Makefile for the Intel 810/815 framebuffer driver
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
obj-$(CONFIG_FB_I810) += i810fb.o
--- linux-2.6.1-mm4/fs/befs/Makefile.old 2004-01-18 19:03:58.000000000 +0100
+++ linux-2.6.1-mm4/fs/befs/Makefile 2004-01-18 19:06:08.000000000 +0100
@@ -1,12 +1,6 @@
#
# Makefile for the linux BeOS filesystem routines.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
obj-$(CONFIG_BEFS_FS) += befs.o
--- linux-2.6.1-mm4/net/ipv4/ipvs/Makefile.old 2004-01-18 19:03:59.000000000 +0100
+++ linux-2.6.1-mm4/net/ipv4/ipvs/Makefile 2004-01-18 19:06:45.000000000 +0100
@@ -1,12 +1,6 @@
#
# Makefile for the IPVS modules on top of IPv4.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
# IPVS transport protocol load balancing support
ip_vs_proto-objs-y :=
next prev parent reply other threads:[~2004-01-18 18:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-15 13:05 Adrian Bunk
2004-01-15 13:49 ` Christoph Hellwig
2004-01-18 18:09 ` Adrian Bunk [this message]
2004-01-15 14:51 ` Andries Brouwer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040118180947.GD12027@fs.tum.de \
--to=bunk@fs.tum.de \
--cc=aebr@win.tue.nl \
--cc=akpm@osdl.org \
--cc=hch@infradead.org \
--cc=jmm@sublogic.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome