From: Pavel Machek <pavel@ucw.cz>
To: Andrew Morton <akpm@zip.com.au>,
kernel list <linux-kernel@vger.kernel.org>
Subject: Allow software_suspend to fail
Date: Tue, 20 Jan 2004 23:55:39 +0100 [thread overview]
Message-ID: <20040120225539.GA19202@elf.ucw.cz> (raw)
Hi!
software_suspend() can fail for quite a lot of reasons (for example not
enough swapspace). However current interface returned void, so you
could not propagate error back to userland. This fixes it. Plus
__read_suspend_image() is only done during init time, so we might as
well mark it __init. Please apply,
Pavel
Index: linux/include/linux/suspend.h
===================================================================
--- linux.orig/include/linux/suspend.h 2004-01-13 22:52:40.000000000 +0100
+++ linux/include/linux/suspend.h 2004-01-20 22:51:15.000000000 +0100
@@ -45,31 +43,43 @@
/* mm/page_alloc.c */
extern void drain_local_pages(void);
+/* kernel/power/swsusp.c */
+extern int software_suspend(void);
+
extern unsigned int nr_copy_pages __nosavedata;
extern suspend_pagedir_t *pagedir_nosave __nosavedata;
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_SOFTWARE_SUSPEND
-
-extern unsigned char software_suspend_enabled;
-extern void software_suspend(void);
#else /* CONFIG_SOFTWARE_SUSPEND */
-static inline void software_suspend(void)
+static inline int software_suspend(void)
{
printk("Warning: fake suspend called\n");
+ return -EPERM;
}
+#define software_resume() do { } while(0)
#endif /* CONFIG_SOFTWARE_SUSPEND */
#ifdef CONFIG_PM
extern void refrigerator(unsigned long);
+extern int freeze_processes(void);
+extern void thaw_processes(void);
+
+extern int pm_prepare_console(void);
+extern void pm_restore_console(void);
#else
static inline void refrigerator(unsigned long flag)
{
}
+static inline int freeze_processes(void)
+{
+ return 0;
+}
+static inline void thaw_processes(void)
+{
+
+}
#endif /* CONFIG_PM */
#endif /* _LINUX_SWSUSP_H */
Index: linux/kernel/power/swsusp.c
===================================================================
--- linux.orig/kernel/power/swsusp.c 2004-01-13 22:52:40.000000000 +0100
+++ linux/kernel/power/swsusp.c 2004-01-09 20:33:05.000000000 +0100
@@ -694,11 +676,22 @@
mark_swapfiles(((swp_entry_t) {0}), MARK_SWAP_RESUME);
}
-static void do_software_suspend(void)
+/*
+ * This is main interface to the outside world. It needs to be
+ * called from process context.
+ */
+int software_suspend(void)
{
+ int res;
+ if (!software_suspend_enabled)
+ return -EAGAIN;
+
+ software_suspend_enabled = 0;
+ might_sleep();
+
if (arch_prepare_suspend()) {
printk("%sArchitecture failed to prepare\n", name_suspend);
- return;
+ return -EPERM;
}
if (pm_prepare_console())
printk( "%sCan't allocate a console... proceeding\n", name_suspend);
@@ -728,24 +721,12 @@
*/
do_magic(0);
thaw_processes();
- }
+ } else
+ res = -EBUSY;
software_suspend_enabled = 1;
MDELAY(1000);
pm_restore_console();
-}
-
-/*
- * This is main interface to the outside world. It needs to be
- * called from process context.
- */
-void software_suspend(void)
-{
- if(!software_suspend_enabled)
- return;
-
- software_suspend_enabled = 0;
- might_sleep();
- do_software_suspend();
+ return res;
}
/* More restore stuff */
@@ -915,7 +896,7 @@
extern dev_t __init name_to_dev_t(const char *line);
-static int __read_suspend_image(struct block_device *bdev, union diskpage *cur, int noresume)
+static int __init __read_suspend_image(struct block_device *bdev, union diskpage *cur, int noresume)
{
swp_entry_t next;
int i, nr_pgdir_pages;
Index: linux/kernel/sys.c
===================================================================
--- linux.orig/kernel/sys.c 2004-01-13 22:52:40.000000000 +0100
+++ linux/kernel/sys.c 2004-01-09 20:33:05.000000000 +0100
@@ -472,13 +472,11 @@
#ifdef CONFIG_SOFTWARE_SUSPEND
case LINUX_REBOOT_CMD_SW_SUSPEND:
- if (!software_suspend_enabled) {
+ {
+ int ret = software_suspend();
unlock_kernel();
- return -EAGAIN;
+ return ret;
}
- software_suspend();
- do_exit(0);
- break;
#endif
default:
--
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]
reply other threads:[~2004-01-20 22:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040120225539.GA19202@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=akpm@zip.com.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®