mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
To: linux-kernel <linux-kernel@vger.kernel.org>
Cc: hmallat@cc.hut.fi, jsimmons@infradead.org, geert@linux-m68k.org
Subject: tdfxfb in linux-2.6 and 1GiB RAM
Date: Wed, 28 Jan 2004 16:13:18 -0300	[thread overview]
Message-ID: <20040128161318.5b20d741.vmlinuz386@yahoo.com.ar> (raw)

Hi people,

I can't use frame buffer (tdfxfb) in linux-2.6 with 1GiB of RAM, but yes with 512MiB.
(The linux-2.4 works ok, in both cases.)

HIGHMEM disabled.

The another problem is, when boot in low resolution default 640x480 and switch with
fbset to 1024x768 for example, it changes ok, but can't draw in all screen, only in a
small area of 640x480 located at upper left of screen, the same for all VTs.

If you need more info in logs/proc/sysfs please let me know.

the @dmesg (1GiB) appears:
fb: Can't remap 3Dfx Voodoo5 register area.
tdfxfb: probe of 0000:01:00.0 failed with error -6

and @dmesg (512MiB):
fb: 3Dfx Voodoo5 memory = 32768K

lspci -vv output:
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5 (rev 01) (prog-if 00 [VGA])
        Subsystem: 3Dfx Interactive, Inc.: Unknown device 0004
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
        Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Region 2: I/O ports at c000 [size=256]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [54] AGP version 2.0
                Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit+ FW- AGP3- Rate=x1,x2
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


/proc/iomem (1GiB)
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
  00100000-00366df4 : Kernel code
  00366df5-0043613f : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
d0000000-dfffffff : PCI Bus #01
  d0000000-d7ffffff : 0000:01:00.0
e0000000-e7ffffff : PCI Bus #01
  e0000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:00:00.0
ec000000-ec0000ff : 0000:00:09.0
  ec000000-ec0000ff : 8139too
ec001000-ec0010ff : 0000:00:10.3
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved

/proc/iomem (512MiB)
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
  00100000-003504e0 : Kernel code
  003504e1-0041c13f : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
d0000000-dfffffff : PCI Bus #01
  d0000000-d7ffffff : 0000:01:00.0
    d0000000-d7ffffff : tdfx regbase
e0000000-e7ffffff : PCI Bus #01
  e0000000-e7ffffff : 0000:01:00.0
    e0000000-e7ffffff : tdfx smem
e8000000-ebffffff : 0000:00:00.0
ec000000-ec0000ff : 0000:00:09.0
  ec000000-ec0000ff : 8139too
ec001000-ec0010ff : 0000:00:10.3
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved


chau,
 djgera


-- 
Gerardo Exequiel Pozzi ( djgera )
http://www.vmlinuz.com.ar http://www.djgera.com.ar
KeyID: 0x1B8C330D
Key fingerprint = 0CAA D5D4 CD85 4434 A219  76ED 39AB 221B 1B8C 330D

             reply	other threads:[~2004-01-28 19:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-01-28 19:13 Gerardo Exequiel Pozzi [this message]
2004-01-29 19:51 ` James Simmons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040128161318.5b20d741.vmlinuz386@yahoo.com.ar \
    --to=vmlinuz386@yahoo.com.ar \
    --cc=geert@linux-m68k.org \
    --cc=hmallat@cc.hut.fi \
    --cc=jsimmons@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®