Hi all,
Just got my nforce2 board. and everything is working, sorta.
I have tried the normal 2.6.2 tree, as well as the -mm1 tree and both produce 
the same oops at startup.
the system does not quit there, it continues to run with no other problems 
other than the ones mentioned here.
there just seems to be various irq oddities going on with this board. 
I have seen the emu10k1 driver complain about losing an irq, but I couldnt 
find that message, and it hasnt happened with -mm1. 

What would be recommended to get it working 100%?
.config is attached.

Another oddity is with my tv card, it seems to act strange, with the following 
in the system log:

bttv0: IRQ lockup, cleared int mask [bits: OFLOW GPINT*]
bttv0: timeout: irq=486/486, risc=1a60804c, bits: VSYNC HSYNC OFLOW GPINT 
RISCI
bttv0: reset, reinitialize


the kernel oops:

Badness in kobject_get at lib/kobject.c:431
Call Trace:
 [<c0227925>] kobject_get+0x35/0x40
 [<c02793b1>] get_device+0x11/0x30
 [<c0279fd9>] bus_for_each_dev+0x59/0xc0
 [<c02ecba5>] nodemgr_node_probe+0x45/0x110
 [<c02eca70>] nodemgr_probe_ne_cb+0x0/0x90
 [<c02ecf6b>] nodemgr_host_thread+0x14b/0x180
 [<c02ece20>] nodemgr_host_thread+0x0/0x180
 [<c0109095>] kernel_thread_helper+0x5/0x10

Unable to handle kernel paging request at virtual address 53565755
 printing eip:
53565755
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
CPU:    0
EIP:    0060:[<53565755>]    Not tainted VLI
EFLAGS: 00010206
EIP is at 0x53565755
eax: 53565755   ebx: c04bf024   ecx: f7d39fa0   edx: 00000000
esi: c02ec530   edi: 00000000   ebp: c02eb2f0   esp: f7d39f48
ds: 007b   es: 007b   ss: 0068
Process knodemgrd_0 (pid: 12, threadinfo=f7d38000 task=f7d6f290)
Stack: c02279b3 c04bf024 c04bf000 c04bf008 c04bef60 f7d3aac4 c0279fef c04bf024
       c04bf000 f7d39fa0 c04bf000 c04befac 00000000 f7d3aabc f7d39fa0 f7d39fa0
       f7fa8000 c02ecba5 c04bef60 f7d3aabc f7d39fa0 c02eca70 f7d6a818 f7d3aa80
Call Trace:
 [<c02279b3>] kobject_cleanup+0x83/0x90
 [<c0279fef>] bus_for_each_dev+0x6f/0xc0
 [<c02ecba5>] nodemgr_node_probe+0x45/0x110
 [<c02eca70>] nodemgr_probe_ne_cb+0x0/0x90
 [<c02ecf6b>] nodemgr_host_thread+0x14b/0x180
 [<c02ece20>] nodemgr_host_thread+0x0/0x180
 [<c0109095>] kernel_thread_helper+0x5/0x10

Code:  Bad EIP value.