From: Mark Watts <m.watts@eris.qinetiq.com>
To: Dan Hopper <ku4nf@austin.rr.com>, linux-kernel@vger.kernel.org
Subject: Re: Promise PDC20378 PATA support?
Date: Wed, 11 Feb 2004 08:50:40 +0000 [thread overview]
Message-ID: <200402110850.40689.m.watts@eris.qinetiq.com> (raw)
In-Reply-To: <20040207071023.GA2304@yoda.dummynet>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> Hi,
>
> Has anyone had any luck getting PATA working on Promise PDC20378
I lied - I have the PDC20376 not the 8 varient.
00:0d.0 RAID bus controller: Promise Technology, Inc. PDC20376 (rev 02)
Subsystem: Promise Technology, Inc.: Unknown device 6620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at cc00 [size=64]
Region 1: I/O ports at c800 [size=16]
Region 2: I/O ports at c400 [size=128]
Region 3: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at dffc0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
During boot I see the following:
PROMISE SATA150 Series Linux Driver v1.00.0.10
pdc-ultra:[info] Drive 5: MAXTOR 6L020J1 40132502s 20548MB UDMA6
scsi0 : pdc-ultra
Vendor: Model: MAXTOR 6L020J1 Rev:
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 4, lun 0
SCSI device sda: 40132503 512-byte hdwr sectors (20548 MB)
/dev/scsi/host0/bus0/target4/lun0: p1
Drive is a 20Gig Maxtor PATA device.
Cheers,
Mark.
- --
Mark Watts
Senior Systems Engineer
QinetiQ TIM
St Andrews Road, Malvern
GPG Public Key ID: 455420ED
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQFAKezgBn4EFUVUIO0RAr/vAKDICBtq9KoZ5ra/zRyKQnN3HU+mXACg094k
89yDB5lyez3+4WsAA3PWxFY=
=z3Gi
-----END PGP SIGNATURE-----
prev parent reply other threads:[~2004-02-11 8:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-07 7:10 Dan Hopper
2004-02-10 13:22 ` Mark Watts
2004-02-11 8:50 ` Mark Watts [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200402110850.40689.m.watts@eris.qinetiq.com \
--to=m.watts@eris.qinetiq.com \
--cc=ku4nf@austin.rr.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®