From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262913AbUBNTjV (ORCPT ); Sat, 14 Feb 2004 14:39:21 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263082AbUBNTjV (ORCPT ); Sat, 14 Feb 2004 14:39:21 -0500 Received: from noose.gt.owl.de ([62.52.19.4]:11787 "EHLO noose.gt.owl.de") by vger.kernel.org with ESMTP id S262913AbUBNTi1 (ORCPT ); Sat, 14 Feb 2004 14:38:27 -0500 Date: Sat, 14 Feb 2004 20:38:20 +0100 From: Florian Lohoff To: linux-kernel@vger.kernel.org Subject: [2.6.2] buffer layer error at fs/buffer.c:430 Message-ID: <20040214193820.GA12203@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="gj572EiMnwbLXET9" Content-Disposition: inline Organization: rfc822 - pure communication User-Agent: Mutt/1.5.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --gj572EiMnwbLXET9 Content-Type: multipart/mixed; boundary="qDbXVdCdHGoSgWSk" Content-Disposition: inline --qDbXVdCdHGoSgWSk Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, when booting an 2.6.2 on an PIII SMP/preempt i got this error. All filesystems are ext3. Debian/sid - Kernel 2.6.2 vanilla SMP/preempt. All block devices are on a HW Raid on a gdth. As all block accesses seemed to have return an error the machine was basically unusuable (9600 Serial Console) - SysRQ B worked - machine booted into 2.4.25-pre. A forced fsck showed unclean journals but no filesystem corruption. Machine has run with 2.4 before for Months. Then it ran for 2-3 weeks 2.6.2 (This exact kernel) after which it ran on 2.4 for a couple days.=20 Config and boot log attached. buffer layer error at fs/buffer.c:430 Call Trace: [] __buffer_error+0x29/0x30 [] __find_get_block_slow+0x9c/0x110 [] __find_get_block+0xa1/0xc4 [] __getblk+0x17/0x30 [] journal_get_descriptor_buffer+0x32/0x48 [] journal_commit_transaction+0xc8d/0x1310 [] do_softirq+0x6c/0xcc [] kjournald+0xfc/0x308 [] kjournald+0x0/0x308 [] autoremove_wake_function+0x0/0x40 [] autoremove_wake_function+0x0/0x40 [] commit_timeout+0x0/0xc [] kernel_thread_helper+0x5/0xc block=3D8192, b_blocknr=3D4294967295 b_state=3D0x00000000, b_size=3D1024 buffer layer error at fs/buffer.c:430 Call Trace: [] __buffer_error+0x29/0x30 [] __find_get_block_slow+0x9c/0x110 [] __find_get_block+0xa1/0xc4 [] __getblk_slow+0x18/0xe8 [] __getblk+0x26/0x30 [] journal_get_descriptor_buffer+0x32/0x48 [] journal_commit_transaction+0xc8d/0x1310 [] do_softirq+0x6c/0xcc [] kjournald+0xfc/0x308 [] kjournald+0x0/0x308 [] autoremove_wake_function+0x0/0x40 [] autoremove_wake_function+0x0/0x40 [] commit_timeout+0x0/0xc [] kernel_thread_helper+0x5/0xc block=3D8192, b_blocknr=3D4294967295 b_state=3D0x00000000, b_size=3D1024 buffer layer error at fs/buffer.c:430 Call Trace: [] __buffer_error+0x29/0x30 [] __find_get_block_slow+0x9c/0x110 [] __find_get_block+0xa1/0xc4 [] __getblk_slow+0x18/0xe8 [] __getblk+0x26/0x30 [] journal_get_descriptor_buffer+0x32/0x48 [] <7>eth0: no IPv6 routers present journal_commit_transaction+0xc8d/0x1310 [] do_softirq+0x6c/0xcc [] kjournald+0xfc/0x308 [] kjournald+0x0/0x308 [] autoremove_wake_function+0x0/0x40 [] autoremove_wake_function+0x0/0x40 [] commit_timeout+0x0/0xc [] kernel_thread_helper+0x5/0xc block=3D8192, b_blocknr=3D4294967295 b_state=3D0x00000000, b_size=3D1024 Debian GNU/Linuxbuffer layer error at fs/buffer.c:430 testing/unstablCall Trace:e dump.mediaways =2Enet ttyS0 [] __buffer_error+0x29/0x30 [] __find_get_block_slow+0x9c/0x110 [] __find_get_block+0xa1/0xc4 [] __getblk_slow+0x18/0xe8 [] __getblk+0x26/0x30 [] journal_get_descriptor_buffer+0x32/0x48 [] journal_commit_transaction+0xc8d/0x1310 [] do_softirq+0x6c/0xcc [] kjournald+0xfc/0x308 [] kjournald+0x0/0x308 [] autoremove_wake_function+0x0/0x40 [] autoremove_wake_function+0x0/0x40 [] commit_timeout+0x0/0xc [] kernel_thread_helper+0x5/0xc block=3D8192, b_blocknr=3D4294967295 b_state=3D0x00000000, b_size=3D1024 dump.mediaways.nbuffer layer error at fs/buffer.c:430 et login: Call Trace: [] __buffer_error+0x29/0x30 [] __find_get4 <4ock=3D2, b_cknr94967 b_te=3D0x0000b_siz024 bloc192, lock4294995 b_sta0x00000, ize=3D4 <4ock=3D2, b_cknr94967 <4state00000, b_e=3D1024>bl=3D8192_blor=3D4297295>b_st=3D0x00000,size24 bk=3D819b_blnr=3D4267294>b_se=3D0x00000_siz024 bloc192, lock4294995 <_sta0x00000, ize=3D1 <4ock=3D8, b_cknr=3D4967 <4>tate00000, b_e=3D1024>blo8192_bloc=3D4297295 b_se=3D0x00000_size24 block92, lockn294965 <_statx00000, bze=3D1 <4>block=3D8192, b_blocknr=3D42949672<4>b_te=3D0x0000b_siz024 bloc192,block4294295 Flo --=20 Florian Lohoff flo@rfc822.org +49-171-2280134 Heisenberg may have been here. --qDbXVdCdHGoSgWSk Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="config-2.6.2-dump" # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_EDD=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # # Power management options (ACPI, APM) # # CONFIG_PM is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=y # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_USE_VECTOR is not set # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Device Drivers # # # Generic Driver Options # # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_LBD is not set # # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_REPORT_LUNS=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set CONFIG_SCSI_GDTH=y # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX_CONFIG=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA23XX is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_TUNNEL=m # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # # IPv6: Netfilter Configuration # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_LIMIT=m CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_XFRM=y CONFIG_XFRM_USER=m # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set CONFIG_VLAN_8021Q=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_CSZ=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_POLICE=y # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=m # CONFIG_EEPRO100_PIO is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPPOE is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set CONFIG_SERIO_PCIPS2=y # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_KCS=m CONFIG_IPMI_WATCHDOG=m # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_SOFT_WATCHDOG=m # CONFIG_WDT is not set # CONFIG_WDTPCI is not set # CONFIG_PCWATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_I810_TCO is not set # CONFIG_MIXCOMWD is not set # CONFIG_SCx200_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_AMD7XX_TCO is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_SC1200_WDT is not set # CONFIG_WAFER_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HANGCHECK_TIMER=y # # I2C support # CONFIG_I2C=m CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD8111=m CONFIG_I2C_ELV=m CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_ISA=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_PIIX4=m CONFIG_I2C_PROSAVAGE=m CONFIG_I2C_SAVAGE4=m CONFIG_SCx200_ACB=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VELLEMAN=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m # # I2C Hardware Sensors Chip support # CONFIG_I2C_SENSOR=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83L785TS=m CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=m CONFIG_EXPORTFS=m CONFIG_SUNRPC=m # CONFIG_SUNRPC_GSS is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_FRAME_POINTER is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_TEST is not set # # Library routines # CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y --qDbXVdCdHGoSgWSk Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=boot Content-Transfer-Encoding: quoted-printable LILO 22.5.8 Loading Linux........................... BIOS data check successful Linux version 2.6.2-dump (root@dump) (gcc version 2.95.4 20011002 (Debian p= rerelease)) #1 SMP Thu Feb 5 20:00:40 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffb000 (usable) BIOS-e820: 000000003fffb000 - 000000003ffff000 (ACPI data) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f5290 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ASUS CUR-DLS detected: force use of acpi=3Dht ACPI: RSDP (v000 ASUS ) @ 0x000f6200 ACPI: RSDT (v001 ASUS CUR-DLS 0x30303031 MSFT 0x31313031) @ 0x3fffb000 ACPI: FADT (v001 ASUS CUR-DLS 0x30303031 MSFT 0x31313031) @ 0x3fffb100 ACPI: BOOT (v001 ASUS CUR-DLS 0x30303031 MSFT 0x31313031) @ 0x3fffb040 ACPI: MADT (v001 ASUS CUR-DLS 0x30303031 MSFT 0x31313031) @ 0x3fffb080 ACPI: DSDT (v001 ASUS CUR-DLS 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled) Processor #3 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. I/O APIC #3 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 2 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=3DLinux ro root=3D806 console=3DttyS0,= 9600 nmi_watchdog=3D1 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1000.717 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 904232k/917504k available (1940k kernel code, 12492k reserved, 724k= data, 344k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1974.27 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Pentium III (Coppermine) stepping 06 per-CPU timeslice cutoff: 731.75 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1994.75 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3969.02 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map =2E..changing IO-APIC physical APIC ID to 2 ... ok. BIOS bug, IO-APIC#1 ID 3 is already used!... =2E.. fixing up to 1. (tell your hw vendor) =2E..changing IO-APIC physical APIC ID to 1 ... ok. =2E.TIMER: vector=3D0x31 pin1=3D2 pin2=3D0 =2E.MP-BIOS bug: 8254 timer not connected to IO-APIC =2E..trying to set up timer (IRQ0) through the 8259A ...=20 =2E.... (found pin 0) ...works. activating NMI Watchdog ... done. testing NMI watchdog ... OK. testing the IO APIC....................... =2E................................... done. Using local APIC timer interrupts. calibrating APIC timer ... =2E.... CPU clock speed is 999.0906 MHz. =2E.... host bus clock speed is 133.0320 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0aa0, last bus=3D1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040116 ACPI: Interpreter disabled. SCSI subsystem initialized ACPI: ACPI tables contain no PCI IRQ routing entries PCI: Invalid ACPI-PCI IRQ routing table PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered peer bus 01 PCI: Using IRQ router ServerWorks [1166/0200] at 0000:00:0f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 20 PCI->APIC IRQ transform: (B0,I5,P0) -> 18 PCI->APIC IRQ transform: (B0,I6,P0) -> 19 PCI->APIC IRQ transform: (B0,I15,P0) -> 38 PCI->APIC IRQ transform: (B1,I5,P0) -> 24 PCI->APIC IRQ transform: (B1,I5,P1) -> 25 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 IA-32 Microcode Update Driver: v1.13 Starting balanced_irq Initializing Cryptographic API pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 6= 0 seconds). Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize sym0: <1010-33> rev 0x1 at pci 0000:01:05.0 irq 24 sym0: using 64 bit DMA addressing sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: SCSI BUS has been reset. scsi0 : sym-2.1.18f sym1: <1010-33> rev 0x1 at pci 0000:01:05.1 irq 25 sym1: using 64 bit DMA addressing sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: SCSI BUS has been reset. scsi1 : sym-2.1.18f GDT: Storage RAID Controller Driver. Version: 2.08=20 GDT: Found 1 PCI Storage RAID Controllers GDT CTR0: Configuring GDT-PCI HA at 0/5 IRQ 18 scsi2 : GDT6523RS Vendor: ICP Model: Host Drive #00 Rev: =20 Type: Direct-Access ANSI SCSI revision: 02 Vendor: ICP Model: Host Drive #01 Rev: =20 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 35841015 512-byte hdwr sectors (18351 MB) SCSI device sda: drive cache: write through sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 SCSI device sdb: 288671985 512-byte hdwr sectors (147800 MB) SCSI device sdb: drive cache: write through sdb: sdb1 Attached scsi disk sdb at scsi2, channel 0, id 1, lun 0 Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi2, channel 0, id 1, lun 0, type 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller BIOS EDD facility v0.10 2003-Oct-11, 2 devices found Please report your BIOS at http://domsch.com/linux/edd30/results.html kjournald starting. Commit interva 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 344k freed INIT: version 2.85 booting Setting disc parameters: done. Activating swap. Adding 1542168k swap on /dev/sda5. Priority:-1 extents:1 Checking root file system... fsck 1.35-WIP (31-Jan-2004) e2fsck 1.35-WIP (31-Jan-2004) Backing up journal inode blEXT3 FS on sda6, internal journal ock information. /dev/sda6: clean, 9469/64256 files, 88496/257008 blocks System time was Sat Feb 14 19:04:05 UTC 2004. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sat Feb 14 19:04:07 UTC 2004. Calculating module dependencies... done. Loading modules... auto FATAL: Module auIntel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation to not found. e100 e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled e100: eth1: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled i2c-piix4 piix4-smbus 0000:00:0f.0: Found 0000:00:0f.0 device piix4-smbus 0000:00:0f.0: Unusual config register value piix4-smbus 0000:00:0f.0: Try using fix_hstcfg=3D1 if you experience proble= ms piix4-smbus 0000:00:0f.0: Illegal Interrupt configuration (or code out of d= ate)! w83781d All modules loaded. Checking all file systems... fsck 1.35-WIP (31-Jan-2004) e2fsck 1.35-WIP (31-Jan-2004) e2fsck 1.35-WIP (31-Jan-2004) Backing up journal inode block information. /dev/sda7: clean, 67727/448896 files, 331940/897624 blocks Backing up journal inode block information. /dev/sdb1: clean, 17920/18055168 files, 32940362/36083990 blocks e2fsck 1.35-WIP (31-Jan-2004) Backing up journal inode block information. /dev/sda8: clean, 4261/193152 files, 74283/385552 blocks e2fsck 1.35-WIP (31-Jan-2004) Backing up journal inode block information. /dev/sda9: clean, 55/320640 files, 22124/640584 blocks Setting kernel variables.. Mounting local filesystems... kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal /dev/sda7 on /usr type ext3 (rw)j /dev/sda8 on /ovar type ext3 (ruw) /dev/sda9 onr /tmp type ext3 n(rw) /dev/sdb1 on /opt type exta3 (rw) sysfs onl /sys type sysfs (rw) Cleaning /tmpEXT3-fs: mounted filesystem with ordered data mode. kjournald sta /var/runrting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EX /var/lockT3 FS on sda9, inter. nal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesyRunning 0dns-down to make sure rsesolv.conf is okt..= =2Eem with ordered data mode. done. Cleaning: /etc/network/ifstate. Setting up IP spoofing protection: rp_filter. Configuring network interfaces...done. Starting portmap daemon: portmap. Loading the saved-state of the serial devices...=20 /dev/ttyS0 at 0x03f8 (irq =3D 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq =3D 3) is a 16550A Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Sat Feb 14 20:04:12 CET 2004 Initializing random number generator...done. Setting up X server socket directory /tmp/.X11-unix...done. INIT: Entering runlevel: 2 Starting system log daemon: syslogde100: eth0 NIC Link . is Up 100 Mbps Full duplStarting kernel log daemon: kloged. x e100: eth1 NIC Link is Up 100 Mbps Half duplex Starting Name Service Cache Daemon: nscd. Starting web server: Apache2. Starting automounter: /home. Starting internet superserver: inetd. Starting mail transport agent: Postfix. rsync daemon not enabled in /etc/default/rsync Starting Samba daemons: nmbd smbd. Starting network management services: snmpd. Starting OpenBSD Secure Shell server: sshd. Starting NFS common utilities: statdprocess `snmpd' is using obsolete setso= ckopt SO_BSDCOMPAT lockd. Running ntpdate to synchronize clock. Starting NTP server: ntpd. Starting periodic command scheduler: cron. buffer layer error at fs/buffer.c:430 Call Trace: [] __buffer_error+0x29/0x30 [] __find_get_block_slow+0x9c/0x110 [] __find_get_block+0xa1/0xc4 [] __getblk+0x17/0x30 [] journal_get_descriptor_buffer+0x32/0x48 [] journal_commit_transaction+0xc8d/0x1310 [] do_softirq+0x6c/0xcc [] kjournald+0xfc/0x308 [] kjournald+0x0/0x308 [] autoremove_wake_function+0x0/0x40 [] autoremove_wake_function+0x0/0x40 [] commit_timeout+0x0/0xc [] kernel_thread_helper+0x5/0xc --qDbXVdCdHGoSgWSk-- --gj572EiMnwbLXET9 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQFALnksUaz2rXW+gJcRAscXAJ98mOxnQsspBtng05hDViBtHDP0hACfTX+A XfNHGU/spe45O4ej2Qi3nCs= =rPdg -----END PGP SIGNATURE----- --gj572EiMnwbLXET9--