From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] move CONFIG_HOTPLUG to kernel/Kconfig.hotplug
Date: Sun, 15 Feb 2004 01:57:05 +0100 [thread overview]
Message-ID: <200402150157.05808.bzolnier@elka.pw.edu.pl> (raw)
I've also noticed that some archs (cris, h8300, m68k and sparc) don't
have HOTPLUG in their Kconfig files, shame on you - no udev for you 8).
BTW maybe HOTPLUG should be moved from "Bus options" to "General setup"?
linux-2.6.3-rc2-bk4-root/arch/alpha/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/arm/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/arm26/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/i386/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/ia64/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/m68knommu/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/mips/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/ppc/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/ppc64/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/sh/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/sparc64/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/v850/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/arch/x86_64/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/drivers/parisc/Kconfig | 18 +-----------------
linux-2.6.3-rc2-bk4-root/drivers/s390/Kconfig | 18 ------------------
linux-2.6.3-rc2-bk4-root/kernel/Kconfig.hotplug | 17 +++++++++++++++++
16 files changed, 31 insertions(+), 256 deletions(-)
diff -puN arch/alpha/Kconfig~Kconfig_hotplug arch/alpha/Kconfig
--- linux-2.6.3-rc2-bk4/arch/alpha/Kconfig~Kconfig_hotplug 2004-02-15 01:17:55.118977544 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/alpha/Kconfig 2004-02-15 01:18:51.502405960 +0100
@@ -569,23 +569,7 @@ config VERBOSE_MCHECK_ON
source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/arm26/Kconfig~Kconfig_hotplug arch/arm26/Kconfig
--- linux-2.6.3-rc2-bk4/arch/arm26/Kconfig~Kconfig_hotplug 2004-02-15 01:16:53.573333904 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/arm26/Kconfig 2004-02-15 01:17:19.321419600 +0100
@@ -118,23 +118,7 @@ config XIP_KERNEL
Select this option to create a kernel that can be programed into
the OS ROMs.
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
comment "At least one math emulation must be selected"
diff -puN arch/arm/Kconfig~Kconfig_hotplug arch/arm/Kconfig
--- linux-2.6.3-rc2-bk4/arch/arm/Kconfig~Kconfig_hotplug 2004-02-15 01:19:03.363602784 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/arm/Kconfig 2004-02-15 01:19:25.845185064 +0100
@@ -365,23 +365,7 @@ endif
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/i386/Kconfig~Kconfig_hotplug arch/i386/Kconfig
--- linux-2.6.3-rc2-bk4/arch/i386/Kconfig~Kconfig_hotplug 2004-02-15 01:07:00.758455464 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/i386/Kconfig 2004-02-15 01:13:19.196924072 +0100
@@ -1131,23 +1131,7 @@ config SCx200
This support is also available as a module. If compiled as a
module, it will be called scx200.
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/ia64/Kconfig~Kconfig_hotplug arch/ia64/Kconfig
--- linux-2.6.3-rc2-bk4/arch/ia64/Kconfig~Kconfig_hotplug 2004-02-15 01:19:55.684648776 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/ia64/Kconfig 2004-02-15 01:20:36.384461464 +0100
@@ -439,23 +439,7 @@ config PCI_DOMAINS
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- help
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pci/hotplug/Kconfig"
diff -puN arch/m68knommu/Kconfig~Kconfig_hotplug arch/m68knommu/Kconfig
--- linux-2.6.3-rc2-bk4/arch/m68knommu/Kconfig~Kconfig_hotplug 2004-02-15 01:11:48.543705456 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/m68knommu/Kconfig 2004-02-15 01:13:08.500550168 +0100
@@ -464,23 +464,7 @@ config COMEMPCI
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable device"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/mips/Kconfig~Kconfig_hotplug arch/mips/Kconfig
--- linux-2.6.3-rc2-bk4/arch/mips/Kconfig~Kconfig_hotplug 2004-02-15 01:21:28.093600480 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/mips/Kconfig 2004-02-15 01:22:15.614376224 +0100
@@ -1104,23 +1104,7 @@ config MCA
config SBUS
bool
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/ppc64/Kconfig~Kconfig_hotplug arch/ppc64/Kconfig
--- linux-2.6.3-rc2-bk4/arch/ppc64/Kconfig~Kconfig_hotplug 2004-02-15 01:16:06.581477752 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/ppc64/Kconfig 2004-02-15 01:16:35.988007280 +0100
@@ -227,23 +227,7 @@ source "fs/Kconfig.binfmt"
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/ppc/Kconfig~Kconfig_hotplug arch/ppc/Kconfig
--- linux-2.6.3-rc2-bk4/arch/ppc/Kconfig~Kconfig_hotplug 2004-02-15 01:22:44.675958192 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/ppc/Kconfig 2004-02-15 01:23:28.560286760 +0100
@@ -978,23 +978,7 @@ config PCI_PERMEDIA
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/sh/Kconfig~Kconfig_hotplug arch/sh/Kconfig
--- linux-2.6.3-rc2-bk4/arch/sh/Kconfig~Kconfig_hotplug 2004-02-15 01:23:48.093317288 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/sh/Kconfig 2004-02-15 01:24:24.397798168 +0100
@@ -609,23 +609,7 @@ source "arch/sh/drivers/pci/Kconfig"
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/sparc64/Kconfig~Kconfig_hotplug arch/sparc64/Kconfig
--- linux-2.6.3-rc2-bk4/arch/sparc64/Kconfig~Kconfig_hotplug 2004-02-15 01:15:16.056158768 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/sparc64/Kconfig 2004-02-15 01:15:54.780271808 +0100
@@ -186,23 +186,7 @@ config SPARC64
SPARC64 ports; its web page is available at
<http://www.ultralinux.org/>.
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
# Global things across all Sun machines.
config RWSEM_GENERIC_SPINLOCK
diff -puN arch/v850/Kconfig~Kconfig_hotplug arch/v850/Kconfig
--- linux-2.6.3-rc2-bk4/arch/v850/Kconfig~Kconfig_hotplug 2004-02-15 01:24:48.776092104 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/v850/Kconfig 2004-02-15 01:25:22.365985664 +0100
@@ -236,23 +236,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MC
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable device"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN arch/x86_64/Kconfig~Kconfig_hotplug arch/x86_64/Kconfig
--- linux-2.6.3-rc2-bk4/arch/x86_64/Kconfig~Kconfig_hotplug 2004-02-15 01:13:37.002217256 +0100
+++ linux-2.6.3-rc2-bk4-root/arch/x86_64/Kconfig 2004-02-15 01:14:37.996944648 +0100
@@ -315,23 +315,7 @@ config PCI_USE_VECTOR
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well-known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems, or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN drivers/parisc/Kconfig~Kconfig_hotplug drivers/parisc/Kconfig
--- linux-2.6.3-rc2-bk4/drivers/parisc/Kconfig~Kconfig_hotplug 2004-02-15 01:51:06.950173176 +0100
+++ linux-2.6.3-rc2-bk4-root/drivers/parisc/Kconfig 2004-02-15 01:51:40.267108232 +0100
@@ -143,24 +143,8 @@ config PDC_CHASSIS
This has nothing to do with Chassis LCD and LED support.
If unsure, say Y.
-
-config HOTPLUG
- bool "Support for hot-pluggable devices"
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
+source "kernel/Kconfig.hotplug"
source "drivers/pcmcia/Kconfig"
diff -puN drivers/s390/Kconfig~Kconfig_hotplug drivers/s390/Kconfig
--- linux-2.6.3-rc2-bk4/drivers/s390/Kconfig~Kconfig_hotplug 2004-02-15 01:42:36.325799880 +0100
+++ linux-2.6.3-rc2-bk4-root/drivers/s390/Kconfig 2004-02-15 01:50:29.467871352 +0100
@@ -165,24 +165,6 @@ config S390_TAPE_34XX
endmenu
-
config HOTPLUG
bool
default y
- ---help---
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
-
-
diff -puN /dev/null kernel/Kconfig.hotplug
--- /dev/null 2004-01-17 00:25:55.000000000 +0100
+++ linux-2.6.3-rc2-bk4-root/kernel/Kconfig.hotplug 2004-02-15 01:49:57.404745688 +0100
@@ -0,0 +1,17 @@
+config HOTPLUG
+ bool "Support for hot-pluggable devices"
+ help
+ Say Y here if you want to plug devices into your computer while
+ the system is running, and be able to use them quickly. In many
+ cases, the devices can likewise be unplugged at any time too.
+
+ One well known example of this is PCMCIA- or PC-cards, credit-card
+ size devices such as network cards, modems or hard drives which are
+ plugged into slots found on all modern laptop computers. Another
+ example, used on modern desktops as well as laptops, is USB.
+
+ Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
+ software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+ Then your kernel will automatically call out to a user mode "policy
+ agent" (/sbin/hotplug) to load modules and set up software needed
+ to use devices as you hotplug them.
_
next reply other threads:[~2004-02-15 0:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-15 0:57 Bartlomiej Zolnierkiewicz [this message]
2004-02-16 23:39 ` Greg KH
2004-02-17 1:30 ` Bartlomiej Zolnierkiewicz
2004-02-18 23:24 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200402150157.05808.bzolnier@elka.pw.edu.pl \
--to=b.zolnierkiewicz@elka.pw.edu.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®