Re: Radeonfb problem

[Sergio Vergata <vergata@stud.fbi.fh-darmstadt.de>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Well, just build 2.6.3-rc4 and the problem still exists.

I tried also booting with commandline parameter and reduced the size to 
1280x1024 and 1024x768 both works fine for me 

The dmesg output, from booting without any parameter,  autodetection of the 
displaysize works fine.

Sergio

....
radeonfb_pci_register BEGIN
PCI: Found IRQ 6 for device 0000:01:00.0
PCI: Sharing IRQ 6 with 0000:00:1d.0
PCI: Sharing IRQ 6 with 0000:02:00.0
PCI: Sharing IRQ 6 with 0000:02:01.0
radeonfb: probed DDR SGRAM 65536k videoram
radeonfb: mapped 16384k videoram
radeonfb: Invalid ROM signature 0 should be 0xaa55
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz
1 chips in connector info
 - chip 1 has 2 connectors
  * connector 0 of type 2 (CRT) : 2300
  * connector 1 of type 4 (DVI-D) : 4201
Starting monitor auto detection...
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: SXGA+ Single (85MHz)    
radeonfb: detected LVDS panel size from BIOS: 1400x1050
BIOS provided panel power delay: 1000
radeondb: BIOS provided dividers will be used
ref_divider = 6
post_divider = 2
fbk_divider = 4c
Scanning BIOS table ...
 320 x 350
 320 x 400
 320 x 400
 320 x 480
 400 x 600
 512 x 384
 640 x 350
 640 x 400
 640 x 475
 640 x 480
 800 x 600
 1024 x 768
 1152 x 864
 1280 x 1024
 1400 x 1050
Found panel in BIOS table:
  hblank: 200
  hOver_plus: 72
  hSync_width: 40
  vblank: 12
  vOver_plus: 2
  vSync_width: 1
  clock: 8496
Setting up default mode based on panel info
radeonfb: Power Management enabled for Mobility chipsets
radeonfb: ATI Radeon Lf  DDR SGRAM 64 MB
radeonfb_pci_register END
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Machine check exception polling timer started.
speedstep-centrino: found "Intel(R) Pentium(R) M processor 1600MHz": max 
frequency: 1600000kHz
ikconfig 0.7 with /proc/config*
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7	   hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425	   vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003dffa1
Console: switching to colour frame buffer device 175x65
...

On Tuesday 17 February 2004 23:22, Benjamin Herrenschmidt wrote:
> On Wed, 2004-02-18 at 08:57, Damian Kolkowski wrote:
> > * Kronos <kronos@kronoz.cjb.net> [2004-02-17 22:51]:
> > > > 2.6.3-rc4 with new radeonfb looks better, but in lilo.con append for
> > > > radeonfb wont work.
> > >
> > > What do you mean? What are passing to the kernel?
> >
> > For example:
> >
> > append = "video=radeon:1024x768-32@100" works for 2.4.x
> > append = "video=radeonfb:1024x768-32@100 works for 2.6.x
> >
> > but for new radeonfb _radeonfb_ in append won't work, my screean start
> > with small res on 36 Hz ;-) So I need to use fbset.
> >
> > Besides don't use 2.6.x even on desktop, that was only a test with new
> > radeonfb from Ben H.
>
> Ugh ? Send me a dmesg log at boot please without any command
> line. radeonfb should set your display to the native panel size
> by default
>
> Ben.

- --
Microsoft is to operating systems & security ....
             .... what McDonalds is to gourmet cooking

PGP-Key http://vergata.it/GPG/F17FDB2F.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAMqueVP5w5vF/2y8RAl1cAKDbvE0+Rw5IlzaLBIQOTbFdhtN+cACgxvYi
NagkT2Buid3GhhQQdyNwfk4=
=veYH
-----END PGP SIGNATURE-----