> While trying to burn some files to it with growisofs I got the following > error message > and the program froze. > --- syslog --- > Feb 18 22:20:56 localhost kernel: SCSI error : <0 0 0 0> return code = > 0x8000002 > Feb 18 22:20:56 localhost kernel: Current sr0: sense = 70 4 > Feb 18 22:20:56 localhost kernel: ASC=1b ASCQ= 0 > Feb 18 22:20:56 localhost kernel: Raw sense data:0x70 0x00 0x04 0x00 > 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x1b 0x00 0x00 0x00 0x00 0x00 > > --- syslog --- > Trying the same with USB 2.0 worked without a problem. Ok, digging through the sources I found out that the following change causes the problems I have. --------------- diff -Nru a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c --- a/drivers/scsi/scsi_lib.c Fri Feb 6 18:08:14 2004 +++ b/drivers/scsi/scsi_lib.c Fri Feb 6 18:08:14 2004 @@ -1287,6 +1284,15 @@ blk_queue_max_sectors(q, shost->max_sectors); blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost)); blk_queue_segment_boundary(q, shost->dma_boundary); + + /* + * Set the queue's mask to require a mere 8-byte alignment for + * DMA buffers, rather than the default 512. This shouldn't + * inconvenience any user programs and should be okay for most + * host adapters. A host driver can alter this mask in its + * slave_alloc() or slave_configure() callback if necessary. + */ + blk_queue_dma_alignment(q, (8 - 1)); if (!shost->use_clustering) clear_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); --------------- Commenting out this change made my burner work again. Can someone tell me why? /Michael