From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261585AbUBVQFy (ORCPT ); Sun, 22 Feb 2004 11:05:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261606AbUBVQFy (ORCPT ); Sun, 22 Feb 2004 11:05:54 -0500 Received: from dns.communicationvalley.it ([212.239.58.133]:36997 "HELO rose.communicationvalley.it") by vger.kernel.org with SMTP id S261585AbUBVQFH (ORCPT ); Sun, 22 Feb 2004 11:05:07 -0500 From: Silla Rizzoli Organization: Communication Valley spa To: daniel.ritz@gmx.ch Subject: Re: 2.4.25 yenta problem and small fix/workaround Date: Sun, 22 Feb 2004 17:03:54 +0100 User-Agent: KMail/1.6 Cc: linux-kernel References: <200402202331.45218.daniel.ritz@gmx.ch> <200402211328.56826.silla@netvalley.it> <200402211812.14040.daniel.ritz@gmx.ch> In-Reply-To: <200402211812.14040.daniel.ritz@gmx.ch> MIME-Version: 1.0 Content-Disposition: inline Content-Type: Multipart/Mixed; boundary="Boundary-00=_qLNOAN9n8f48kEZ" Message-Id: <200402221703.55235.silla@netvalley.it> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --Boundary-00=_qLNOAN9n8f48kEZ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline > On Saturday 21 February 2004 13:28, Silla Rizzoli wrote: > > > the CB_CDETECT1 and CB_CDETECT2 bits both should be 0 for the card > > > being recognized correctly (and one of the voltage bits need to be set) > > > > Nope, sorry, same behaviour. :( > > either voltage interrogation is still not redone or one of > CB_CDETECT1,CB_CDETECT2 is still set afterwards... > > could you apply the attached patch (on top of my previous patch) and send > the output of dmesg? > > thanx > -daniel Hello, while testing your last patch I noticed a strange thing... ... mice: PS/2 mouse device common for all mice yenta_get_status: socket e1d2b700 state 30000087 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000087 SCSI subsystem driver Revision: 1.00 This is dmesg after bootup completes: if I insert the card nothing happens, but if I start X, the card gets magically recognized and initialized! The following lines are added to dmesg: Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel i845 chipset agpgart: AGP aperture is 64M @ 0xe0000000 [drm] AGP 0.99 Aperture @ 0xe0000000 64MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 yenta_get_status: socket e1d2b700 state 30000511 yenta_get_status: socket e1d2b700 state 30000511 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000559 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000559 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 Here I stopped the pcmcia service: this unloads all the pccard modules: yenta_get_status: socket e1d2b700 state 30000511 yenta_get_status: socket e1d2b700 state 30000511 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000559 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000559 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 yenta_config_init socket e1d2b700 state 30000559 unloading Kernel Card Services Restarting pcmcia services... Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.1 yenta_config_init socket e1d2b700 state 30000187 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000007 yenta_config_init socket e1d2b700 state 30000007 yenta_get_status: socket e1d2b700 state 30000087 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000087 Inserting card one more time, it now gets initialized correctly: yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000459 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000459 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f Here I shutdown and restart the pcmcia services without extracting the card: once again everything works fine: yenta_config_init socket e1d2b700 state 30000459 unloading Kernel Card Services Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.1 yenta_config_init socket e1d2b700 state 30000411 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000011 yenta_config_init socket e1d2b700 state 30000011 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000459 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000459 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000459 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f After exiting X the card is only recognized if the pcmcia service is started with the card inserted. I attached the full dmesg and three lsmods. The first right after bootup (and after inserting the pc card, which by the way logs nothing), the second one after starting X and the third after exiting X. Hope this helps, Silla --Boundary-00=_qLNOAN9n8f48kEZ Content-Type: text/plain; charset="iso-8859-1"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" Linux version 2.4.25 (root@mermaid) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 Fri Feb 20 10:49:43 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff50000 (usable) BIOS-e820: 000000001ff50000 - 000000001ff68000 (ACPI data) BIOS-e820: 000000001ff68000 - 000000001ff7a000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130896 zone(0): 4096 pages. zone(1): 126800 pages. zone(2): 0 pages. IBM machine detected. Enabling interrupts during APM calls. Kernel command line: root=/dev/hda3 vga=792 hdc=ide-scsi ide_setup: hdc=ide-scsi No local APIC present or hardware disabled Initializing CPU#0 Detected 1794.223 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3578.26 BogoMIPS Memory: 515144k/523584k available (1471k kernel code, 8052k reserved, 531k data, 124k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000 CPU: Common caps: bfebf9ff 00000000 00000000 00000000 CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd936, last bus=5 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Using IRQ router PIIX/ICH [8086/24cc] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.13 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 radeonfb: ref_clk=2700, ref_div=60, xclk=14400 from BIOS radeonfb: panel ID string: 1024x768 radeonfb: detected LCD panel size from BIOS: 1024x768 Console: switching to colour frame buffer device 128x48 radeonfb: ATI Radeon M6 LY DDR SGRAM 16 MB radeonfb: DVI port LCD monitor connected radeonfb: CRT port no monitor connected vesafb: abort, cannot reserve video memory at 0xe8000000 vesafb: framebuffer at 0xe8000000, mapped to 0xe1806000, size 4608k vesafb: mode is 1024x768x24, linelength=3072, pages=6 vesafb: protected mode interface info at c000:52e9 vesafb: scrolling: redraw vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0 fb1: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.5 i810_rng: RNG not detected floppy0: no floppy controllers found Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23EA-20B, ATA DISK drive blk: queue c0346b80, I/O limit 4095Mb (mask 0xffffffff) hdc: UJDA730 DVD/CDRW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2584/240/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0:<7>ldm_validate_partition_table(): Found an MS-DOS partition table, not a dynamic disk. p1 p2 p3 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM kjournald starting. Commit interval 5 seconds EXT3-fs: ide0(3,3): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 180794 EXT3-fs: ide0(3,3): 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 124k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 1005472k swap-space (priority -1) EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal Intel(R) PRO/100 Network Driver - version 2.3.38-k1 Copyright (c) 2004 Intel Corporation PCI: Found IRQ 11 for device 02:08.0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.1 yenta_config_init socket e1d2b700 state 30000117 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000007 yenta_config_init socket e1d2b700 state 30000007 IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver usb.c: registered new driver usbdevfs usb.c: registered new driver hub Real Time Clock Driver v1.10f PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Setting latency timer of device 00:1f.5 to 64 intel8x0: clocking to 48000 slamr: SmartLink AMRMO modem. slamr: probe 8086:24c6 ICH4 card... PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Setting latency timer of device 00:1f.6 to 64 slamr: mc97 codec is SIL27 slamr: slamr0 is ICH4 card. devfs_register(slamr0): could not append to parent, err: -17 PCI: Found IRQ 11 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 11, pci mem e1dc5000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 uhci.c: USB UHCI at I/O 0x1800, IRQ 11 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 PCI: Sharing IRQ 11 with 02:00.0 PCI: Setting latency timer of device 00:1d.1 to 64 uhci.c: USB UHCI at I/O 0x1820, IRQ 11 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Setting latency timer of device 00:1d.2 to 64 uhci.c: USB UHCI at I/O 0x1840, IRQ 11 usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected hub.c: new USB device 00:1d.1-1, assigned address 2 usb.c: USB device 2 (vend/prod 0xa12/0x1) is not claimed by any active driver. usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6 BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ HCI USB driver ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky usb.c: registered new driver hci_usb hub.c: new USB device 00:1d.1-2, assigned address 3 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6 usb.c: USB device 3 (vend/prod 0x45e/0x7d) is not claimed by any active driver. usb.c: registered new driver hiddev usb.c: registered new driver hid usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6 input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb3:3.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6 yenta_get_status: socket e1d2b700 state 30000087 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000087 SCSI subsystem driver Revision: 1.00 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel i845 chipset agpgart: AGP aperture is 64M @ 0xe0000000 [drm] AGP 0.99 Aperture @ 0xe0000000 64MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 yenta_get_status: socket e1d2b700 state 30000511 yenta_get_status: socket e1d2b700 state 30000511 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000519 yenta_get_status: socket e1d2b700 state 30000559 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000559 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f yenta_config_init socket e1d2b700 state 30000559 unloading Kernel Card Services Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.1 yenta_config_init socket e1d2b700 state 30000117 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000007 yenta_config_init socket e1d2b700 state 30000007 yenta_get_status: socket e1d2b700 state 30000087 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000087 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000459 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000459 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f yenta_config_init socket e1d2b700 state 30000459 unloading Kernel Card Services Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.1 yenta_config_init socket e1d2b700 state 30000411 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000011 yenta_config_init socket e1d2b700 state 30000011 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000459 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000459 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000459 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f yenta_config_init socket e1d2b700 state 30000459 unloading Kernel Card Services Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.1 yenta_config_init socket e1d2b700 state 30000411 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000011 yenta_config_init socket e1d2b700 state 30000011 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000411 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000419 yenta_get_status: socket e1d2b700 state 30000459 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000459 cs: memory probe 0xa0000000-0xa0ffffff: clean. yenta_get_status: socket e1d2b700 state 30000459 airo: Probing for PCI adapters airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:9:b7:c4:51:31 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f yenta_config_init socket e1d2b700 state 30000459 unloading Kernel Card Services Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.1 yenta_config_init socket e1d2b700 state 30000017 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000007 yenta_config_init socket e1d2b700 state 30000007 yenta_get_status: socket e1d2b700 state 30000087 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. yenta_get_status: socket e1d2b700 state 30000087 --Boundary-00=_qLNOAN9n8f48kEZ Content-Type: text/plain; charset="iso-8859-1"; name="lsmod_after_exiting_X.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lsmod_after_exiting_X.txt" Module Size Used by Tainted: P airo_cs 4004 0 (unused) airo 49048 0 [airo_cs] ds 7028 1 [airo_cs] yenta_socket 11072 1 pcmcia_core 47328 0 [airo_cs ds yenta_socket] aes 31200 1 (autoclean) radeon 106816 0 agpgart 19312 1 (autoclean) ide-cd 32416 0 (autoclean) sr_mod 14392 0 (autoclean) (unused) cdrom 29248 0 (autoclean) [ide-cd sr_mod] scsi_mod 87712 1 (autoclean) [sr_mod] mousedev 4372 0 hid 21988 0 (unused) input 3616 0 [mousedev hid] hci_usb 6648 0 (unused) bluez 32996 1 [hci_usb] uhci 25948 0 (unused) ehci-hcd 18764 0 (unused) slamr 247108 0 (unused) snd-pcm-oss 39492 0 (unused) snd-mixer-oss 13648 0 [snd-pcm-oss] snd-intel8x0 19428 0 (autoclean) snd-pcm 62980 0 (autoclean) [snd-pcm-oss snd-intel8x0] snd-ac97-codec 43256 0 (autoclean) [snd-intel8x0] snd-page-alloc 6676 0 (autoclean) [snd-intel8x0 snd-pcm] snd-mpu401-uart 3376 0 (autoclean) [snd-intel8x0] snd-rawmidi 14048 0 (autoclean) [snd-mpu401-uart] snd-seq-oss 29632 0 (unused) snd-seq-midi-event 3552 0 [snd-seq-oss] snd-seq 37040 2 [snd-seq-oss snd-seq-midi-event] snd-timer 14852 0 [snd-pcm snd-seq] snd-seq-device 4400 0 [snd-rawmidi snd-seq-oss snd-seq] snd 34148 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-oss snd-seq-midi-event snd-seq snd-timer snd-seq-device] soundcore 3940 5 [snd] rtc 7080 0 (autoclean) usbcore 63852 1 [hid hci_usb uhci ehci-hcd] ipv6 171924 -1 e100 49992 0 (unused) unix 15468 5 (autoclean) --Boundary-00=_qLNOAN9n8f48kEZ Content-Type: text/plain; charset="iso-8859-1"; name="lsmod_after_starting_X.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lsmod_after_starting_X.txt" Module Size Used by Tainted: P aes 31200 1 (autoclean) airo_cs 4004 0 (unused) airo 49048 0 [airo_cs] radeon 106816 1 agpgart 19312 3 (autoclean) ide-cd 32416 0 (autoclean) sr_mod 14392 0 (autoclean) (unused) cdrom 29248 0 (autoclean) [ide-cd sr_mod] scsi_mod 87712 1 (autoclean) [sr_mod] ds 7028 1 [airo_cs] mousedev 4372 1 hid 21988 0 (unused) input 3616 0 [mousedev hid] hci_usb 6648 0 (unused) bluez 32996 1 [hci_usb] uhci 25948 0 (unused) ehci-hcd 18764 0 (unused) slamr 247108 0 (unused) snd-pcm-oss 39492 0 (unused) snd-mixer-oss 13648 0 [snd-pcm-oss] snd-intel8x0 19428 1 (autoclean) snd-pcm 62980 0 (autoclean) [snd-pcm-oss snd-intel8x0] snd-ac97-codec 43256 0 (autoclean) [snd-intel8x0] snd-page-alloc 6676 0 (autoclean) [snd-intel8x0 snd-pcm] snd-mpu401-uart 3376 0 (autoclean) [snd-intel8x0] snd-rawmidi 14048 0 (autoclean) [snd-mpu401-uart] snd-seq-oss 29632 0 (unused) snd-seq-midi-event 3552 0 [snd-seq-oss] snd-seq 37040 2 [snd-seq-oss snd-seq-midi-event] snd-timer 14852 0 [snd-pcm snd-seq] snd-seq-device 4400 0 [snd-rawmidi snd-seq-oss snd-seq] snd 34148 1 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-oss snd-seq-midi-event snd-seq snd-timer snd-seq-device] soundcore 3940 5 [snd] rtc 7080 0 (autoclean) usbcore 63852 1 [hid hci_usb uhci ehci-hcd] ipv6 171924 -1 yenta_socket 11072 1 pcmcia_core 47328 0 [airo_cs ds yenta_socket] e100 49992 0 (unused) unix 15468 126 (autoclean) --Boundary-00=_qLNOAN9n8f48kEZ Content-Type: text/plain; charset="iso-8859-1"; name="lsmod_before_starting_X.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lsmod_before_starting_X.txt" Module Size Used by Tainted: P ide-cd 32416 0 (autoclean) sr_mod 14392 0 (autoclean) (unused) cdrom 29248 0 (autoclean) [ide-cd sr_mod] scsi_mod 87712 1 (autoclean) [sr_mod] ds 7028 1 mousedev 4372 0 (unused) hid 21988 0 (unused) input 3616 0 [mousedev hid] hci_usb 6648 0 (unused) bluez 32996 1 [hci_usb] uhci 25948 0 (unused) ehci-hcd 18764 0 (unused) slamr 247108 0 (unused) snd-pcm-oss 39492 0 (unused) snd-mixer-oss 13648 0 [snd-pcm-oss] snd-intel8x0 19428 0 (autoclean) snd-pcm 62980 0 (autoclean) [snd-pcm-oss snd-intel8x0] snd-ac97-codec 43256 0 (autoclean) [snd-intel8x0] snd-page-alloc 6676 0 (autoclean) [snd-intel8x0 snd-pcm] snd-mpu401-uart 3376 0 (autoclean) [snd-intel8x0] snd-rawmidi 14048 0 (autoclean) [snd-mpu401-uart] snd-seq-oss 29632 0 (unused) snd-seq-midi-event 3552 0 [snd-seq-oss] snd-seq 37040 2 [snd-seq-oss snd-seq-midi-event] snd-timer 14852 0 [snd-pcm snd-seq] snd-seq-device 4400 0 [snd-rawmidi snd-seq-oss snd-seq] snd 34148 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-oss snd-seq-midi-event snd-seq snd-timer snd-seq-device] soundcore 3940 5 [snd] rtc 7080 0 (autoclean) usbcore 63852 1 [hid hci_usb uhci ehci-hcd] ipv6 171924 -1 yenta_socket 11072 1 pcmcia_core 47328 0 [ds yenta_socket] e100 49992 0 (unused) unix 15468 4 (autoclean) --Boundary-00=_qLNOAN9n8f48kEZ--