From: Pavel Machek <pavel@ucw.cz>
To: Andrew Morton <akpm@zip.com.au>,
kernel list <linux-kernel@vger.kernel.org>,
"Amit S. Kale" <akale@users.sourceforge.net>
Subject: Re: [1/3] kgdb-lite for 2.6.3
Date: Sun, 22 Feb 2004 22:02:24 +0100 [thread overview]
Message-ID: <20040222210224.GB16779@elf.ucw.cz> (raw)
In-Reply-To: <20040222202211.GA2063@mars.ravnborg.org>
[-- Attachment #1: Type: text/plain, Size: 419 bytes --]
Hi!
> +static const char hexchars[] = "0123456789abcdef";
> Grepping after 0123456789 in the src tree gives a lot of hits.
> Maybe we should pull in some functionality from klibc, and place it in lib/
> at some point in time.
This one will have to wait, I fixed the others in the internal tree.
Here's the diff
Pavel
--
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]
[-- Attachment #2: kgdb.3.diff --]
[-- Type: text/plain, Size: 18432 bytes --]
--- clean-mm/arch/i386/kernel/i386-stub.c 2004-02-22 16:43:46.000000000 +0100
+++ linux-mm/arch/i386/kernel/i386-stub.c 2004-02-22 21:42:55.000000000 +0100
@@ -283,7 +283,7 @@
}
int kgdb_arch_handle_exception(int exceptionVector, int signo,
- int err_code, char *remcomInBuffer, char *remcomOutBuffer,
+ int err_code, char *remcom_in_buffer, char *remcom_out_buffer,
struct pt_regs *linux_regs)
{
long addr, length;
@@ -292,19 +292,19 @@
int newPC;
int dr6;
- switch (remcomInBuffer[0]) {
+ switch (remcom_in_buffer[0]) {
case 'c':
case 's':
if (kgdb_contthread && kgdb_contthread != current) {
- strcpy(remcomOutBuffer, "E00");
+ strcpy(remcom_out_buffer, "E00");
break;
}
kgdb_contthread = NULL;
/* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
- if (kgdb_hexToLong(&ptr, &addr)) {
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr)) {
linux_regs->eip = addr;
}
newPC = linux_regs->eip;
@@ -313,7 +313,7 @@
linux_regs->eflags &= 0xfffffeff;
/* set the trace bit if we're stepping */
- if (remcomInBuffer[0] == 's') {
+ if (remcom_in_buffer[0] == 's') {
linux_regs->eflags |= 0x100;
debugger_step = 1;
}
@@ -336,30 +336,30 @@
return (0);
case 'Y':
- ptr = &remcomInBuffer[1];
- kgdb_hexToLong(&ptr, &breakno);
+ ptr = &remcom_in_buffer[1];
+ kgdb_hex2long(&ptr, &breakno);
ptr++;
- kgdb_hexToLong(&ptr, &breaktype);
+ kgdb_hex2long(&ptr, &breaktype);
ptr++;
- kgdb_hexToLong(&ptr, &length);
+ kgdb_hex2long(&ptr, &length);
ptr++;
- kgdb_hexToLong(&ptr, &addr);
+ kgdb_hex2long(&ptr, &addr);
if (set_hw_break(breakno & 0x3, breaktype & 0x3,
length & 0x3, addr) == 0) {
- strcpy(remcomOutBuffer, "OK");
+ strcpy(remcom_out_buffer, "OK");
} else {
- strcpy(remcomOutBuffer, "ERROR");
+ strcpy(remcom_out_buffer, "ERROR");
}
break;
/* Remove hardware breakpoint */
case 'y':
- ptr = &remcomInBuffer[1];
- kgdb_hexToLong(&ptr, &breakno);
+ ptr = &remcom_in_buffer[1];
+ kgdb_hex2long(&ptr, &breakno);
if (remove_hw_break(breakno & 0x3) == 0) {
- strcpy(remcomOutBuffer, "OK");
+ strcpy(remcom_out_buffer, "OK");
} else {
- strcpy(remcomOutBuffer, "ERROR");
+ strcpy(remcom_out_buffer, "ERROR");
}
break;
--- clean-mm/arch/ppc/kernel/ppc-stub.c 2004-02-22 18:38:38.000000000 +0100
+++ linux-mm/arch/ppc/kernel/ppc-stub.c 2004-02-22 21:48:34.000000000 +0100
@@ -223,13 +223,13 @@
* This function does PoerPC specific procesing for interfacing to gdb.
*/
int kgdb_arch_handle_exception (int vector, int signo, int err_code,
- char *remcomInBuffer, char *remcomOutBuffer,
+ char *remcom_in_buffer, char *remcom_out_buffer,
struct pt_regs *linux_regs)
{
char *ptr;
unsigned long addr;
- switch (remcomInBuffer[0])
+ switch (remcom_in_buffer[0])
{
/*
* sAA..AA Step one instruction from AA..AA
@@ -239,7 +239,7 @@
case 'c':
if (kgdb_contthread && kgdb_contthread != current)
{
- strcpy(remcomOutBuffer, "E00");
+ strcpy(remcom_out_buffer, "E00");
break;
}
@@ -247,11 +247,11 @@
/* handle the optional parameter */
ptr = &remcomInBuffer[1];
- if (kgdb_hexToLong (&ptr, &addr))
+ if (kgdb_hex2long (&ptr, &addr))
linux_regs->nip = addr;
/* set the trace bit if we're stepping */
- if (remcomInBuffer[0] == 's')
+ if (remcom_in_buffer[0] == 's')
{
#if defined (CONFIG_4xx)
linux_regs->msr |= MSR_DE;
--- clean-mm/arch/x86_64/kernel/x86_64-stub.c 2004-02-22 18:38:42.000000000 +0100
+++ linux-mm/arch/x86_64/kernel/x86_64-stub.c 2004-02-22 21:42:56.000000000 +0100
@@ -297,7 +297,7 @@
}
int kgdb_arch_handle_exception(int exceptionVector, int signo, int err_code,
- char *remcomInBuffer, char *remcomOutBuffer,
+ char *remcom_in_buffer, char *remcom_out_buffer,
struct pt_regs *linux_regs)
{
unsigned long addr, length;
@@ -306,19 +306,19 @@
int newPC;
unsigned long dr6;
- switch (remcomInBuffer[0]) {
+ switch (remcom_in_buffer[0]) {
case 'c':
case 's':
if (kgdb_contthread && kgdb_contthread != current) {
- strcpy(remcomOutBuffer, "E00");
+ strcpy(remcom_out_buffer, "E00");
break;
}
kgdb_contthread = NULL;
/* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
- if (kgdb_hexToLong(&ptr, &addr)) {
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr)) {
linux_regs->rip = addr;
}
newPC = linux_regs->rip;
@@ -327,7 +327,7 @@
linux_regs->eflags &= 0xfffffeff;
/* set the trace bit if we're stepping */
- if (remcomInBuffer[0] == 's') {
+ if (remcom_in_buffer[0] == 's') {
linux_regs->eflags |= 0x100;
debugger_step = 1;
}
@@ -350,30 +350,30 @@
return (0);
case 'Y':
- ptr = &remcomInBuffer[1];
- kgdb_hexToLong(&ptr, &breakno);
+ ptr = &remcom_in_buffer[1];
+ kgdb_hex2long(&ptr, &breakno);
ptr++;
- kgdb_hexToLong(&ptr, &breaktype);
+ kgdb_hex2long(&ptr, &breaktype);
ptr++;
- kgdb_hexToLong(&ptr, &length);
+ kgdb_hex2long(&ptr, &length);
ptr++;
- kgdb_hexToLong(&ptr, &addr);
+ kgdb_hex2long(&ptr, &addr);
if (set_hw_break(breakno & 0x3, breaktype & 0x3,
length & 0x3, addr) == 0) {
- strcpy(remcomOutBuffer, "OK");
+ strcpy(remcom_out_buffer, "OK");
} else {
- strcpy(remcomOutBuffer, "ERROR");
+ strcpy(remcom_out_buffer, "ERROR");
}
break;
/* Remove hardware breakpoint */
case 'y':
- ptr = &remcomInBuffer[1];
- kgdb_hexToLong(&ptr, &breakno);
+ ptr = &remcom_in_buffer[1];
+ kgdb_hex2long(&ptr, &breakno);
if (remove_hw_break(breakno & 0x3) == 0) {
- strcpy(remcomOutBuffer, "OK");
+ strcpy(remcom_out_buffer, "OK");
} else {
- strcpy(remcomOutBuffer, "ERROR");
+ strcpy(remcom_out_buffer, "ERROR");
}
break;
--- clean-mm/include/linux/kgdb.h 2004-02-22 16:43:42.000000000 +0100
+++ linux-mm/include/linux/kgdb.h 2004-02-22 21:42:55.000000000 +0100
@@ -105,7 +105,7 @@
extern void kgdb8250_add_port(int i, struct uart_port *serial_req);
-int kgdb_hexToLong(char **ptr, long *longValue);
+int kgdb_hex2long(char **ptr, long *longValue);
char *kgdb_mem2hex(char *mem, char *buf, int count);
char *kgdb_hex2mem(char *buf, char *mem, int count);
int kgdb_get_mem (char *addr, unsigned char *buf, int count);
--- clean-mm/kernel/kgdbstub.c 2004-02-22 16:43:42.000000000 +0100
+++ linux-mm/kernel/kgdbstub.c 2004-02-22 21:49:11.000000000 +0100
@@ -99,8 +99,8 @@
*/
gdb_debug_hook *linux_debug_hook;
-static char remcomInBuffer[BUFMAX];
-static char remcomOutBuffer[BUFMAX];
+static char remcom_in_buffer[BUFMAX];
+static char remcom_out_buffer[BUFMAX];
/*
* The following are the stub functions for code which is arch specific
@@ -203,7 +203,7 @@
}
/* scan for the sequence $<data>#<checksum> */
-static void getpacket(char *buffer)
+static void get_packet(char *buffer)
{
unsigned char checksum;
unsigned char xmitcsum;
@@ -213,7 +213,8 @@
do {
/* wait around for the start character, ignore all other characters */
- while ((ch = (kgdb_serial->read_char() & 0x7f)) != '$');
+ while ((ch = (kgdb_serial->read_char() & 0x7f)) != '$')
+ ;
checksum = 0;
xmitcsum = -1;
@@ -248,7 +249,7 @@
* Send the packet in buffer.
* Check for gdb connection if asked for.
*/
-static void putpacket(char *buffer, int checkconnect)
+static void put_packet(char *buffer, int checkconnect)
{
unsigned char checksum;
int count;
@@ -389,7 +390,7 @@
* While we find nice hex chars, build a longValue.
* Return number of chars processed.
*/
-int kgdb_hexToLong(char **ptr, long *longValue)
+int kgdb_hex2long(char **ptr, long *longValue)
{
int numChars = 0;
int hexValue;
@@ -691,25 +692,25 @@
procindebug[smp_processor_id()] = 1;
/* Clear the out buffer. */
- memset(remcomOutBuffer, 0, sizeof(remcomOutBuffer));
+ memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
/* Master processor is completely in the debugger */
kgdb_post_master_code(linux_regs, exVector, err_code);
if (atomic_read(&kgdb_killed_or_detached) &&
atomic_read(&kgdb_might_be_resumed)) {
- getpacket(remcomInBuffer);
- if(remcomInBuffer[0] == 'H' && remcomInBuffer[1] =='c') {
+ get_packet(remcom_in_buffer);
+ if(remcom_in_buffer[0] == 'H' && remcom_in_buffer[1] =='c') {
remove_all_break();
atomic_set(&kgdb_killed_or_detached, 0);
- ok_packet(remcomOutBuffer);
+ ok_packet(remcom_out_buffer);
}
else
return 1;
} else {
/* reply to host that an exception has occurred */
- ptr = remcomOutBuffer;
+ ptr = remcom_out_buffer;
*ptr++ = 'T';
*ptr++ = hexchars[(signo >> 4) % 16];
*ptr++ = hexchars[signo % 16];
@@ -720,7 +721,7 @@
*ptr = '\0';
}
- putpacket(remcomOutBuffer, 0);
+ put_packet(remcom_out_buffer, 0);
kgdb_connected = 1;
kgdb_usethread = current;
@@ -731,15 +732,15 @@
error = 0;
/* Clear the out buffer. */
- memset(remcomOutBuffer, 0, sizeof(remcomOutBuffer));
+ memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
- getpacket(remcomInBuffer);
+ get_packet(remcom_in_buffer);
- switch (remcomInBuffer[0]) {
+ switch (remcom_in_buffer[0]) {
case '?':
- remcomOutBuffer[0] = 'S';
- remcomOutBuffer[1] = hexchars[signo >> 4];
- remcomOutBuffer[2] = hexchars[signo % 16];
+ remcom_out_buffer[0] = 'S';
+ remcom_out_buffer[1] = hexchars[signo >> 4];
+ remcom_out_buffer[2] = hexchars[signo % 16];
break;
case 'g': /* return the value of the CPU registers */
@@ -757,14 +758,14 @@
kgdb_usethreadid - pid_max -
num_online_cpus());
if (!shadowregs) {
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
}
regs_to_gdb_regs(gdb_regs, shadowregs);
} else if (thread->thread.debuggerinfo) {
if ((error = get_char(thread->thread.debuggerinfo,
(unsigned char *)gdb_regs)) < 0) {
- error_packet(remcomOutBuffer, error);
+ error_packet(remcom_out_buffer, error);
break;
}
regs_to_gdb_regs(gdb_regs,
@@ -778,50 +779,50 @@
sleeping_thread_to_gdb_regs(gdb_regs, thread);
}
- kgdb_mem2hex((char *) gdb_regs, remcomOutBuffer, NUMREGBYTES);
+ kgdb_mem2hex((char *) gdb_regs, remcom_out_buffer, NUMREGBYTES);
break;
case 'G': /* set the value of the CPU registers - return OK */
- kgdb_hex2mem(&remcomInBuffer[1], (char *) gdb_regs,
+ kgdb_hex2mem(&remcom_in_buffer[1], (char *) gdb_regs,
NUMREGBYTES);
if (kgdb_usethread && kgdb_usethread != current)
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
else {
gdb_regs_to_regs(gdb_regs,
(struct pt_regs *)
current->thread.debuggerinfo);
- ok_packet(remcomOutBuffer);
+ ok_packet(remcom_out_buffer);
}
break;
/* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
case 'm':
- ptr = &remcomInBuffer[1];
- if (kgdb_hexToLong(&ptr, &addr) > 0 && *ptr++ == ',' &&
- kgdb_hexToLong(&ptr, &length) > 0) {
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
+ kgdb_hex2long(&ptr, &length) > 0) {
if (IS_ERR(ptr = kgdb_mem2hex((char *) addr,
- remcomOutBuffer,
+ remcom_out_buffer,
length)))
- error_packet(remcomOutBuffer,
+ error_packet(remcom_out_buffer,
PTR_ERR(ptr));
} else
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
/* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
case 'M':
- ptr = &remcomInBuffer[1];
- if (kgdb_hexToLong(&ptr, &addr) > 0 && *(ptr++) == ','
- && kgdb_hexToLong(&ptr, &length) > 0 &&
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ','
+ && kgdb_hex2long(&ptr, &length) > 0 &&
*(ptr++) == ':') {
if (IS_ERR(ptr = kgdb_hex2mem(ptr, (char *)addr,
length)))
- error_packet(remcomOutBuffer,
+ error_packet(remcom_out_buffer,
PTR_ERR(ptr));
} else
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
/* kill or detach. KGDB should treat this like a
@@ -829,12 +830,12 @@
*/
case 'D':
if ((error = remove_all_break()) < 0) {
- error_packet(remcomOutBuffer, error);
+ error_packet(remcom_out_buffer, error);
} else {
- ok_packet(remcomOutBuffer);
+ ok_packet(remcom_out_buffer);
kgdb_connected = 0;
}
- putpacket(remcomOutBuffer, 0);
+ put_packet(remcom_out_buffer, 0);
goto default_handle;
case 'k':
@@ -845,20 +846,20 @@
/* query */
case 'q':
- switch (remcomInBuffer[1]) {
+ switch (remcom_in_buffer[1]) {
case 's':
case 'f':
- if (memcmp(remcomInBuffer+2, "ThreadInfo",10))
+ if (memcmp(remcom_in_buffer+2, "ThreadInfo",10))
{
- error_packet(remcomOutBuffer,
+ error_packet(remcom_out_buffer,
-EINVAL);
break;
}
- if (remcomInBuffer[1] == 'f') {
+ if (remcom_in_buffer[1] == 'f') {
threadid = 1;
}
- remcomOutBuffer[0] = 'm';
- ptr = remcomOutBuffer + 1;
+ remcom_out_buffer[0] = 'm';
+ ptr = remcom_out_buffer + 1;
for (i = 0; i < 32 && threadid < pid_max +
numshadowth; threadid++) {
thread = getthread(linux_regs,
@@ -877,48 +878,48 @@
case 'C':
/* Current thread id */
- strcpy(remcomOutBuffer, "QC");
+ strcpy(remcom_out_buffer, "QC");
threadid = shadow_pid(current->pid);
int_to_threadref(&thref, threadid);
- pack_threadid(remcomOutBuffer + 2, &thref);
+ pack_threadid(remcom_out_buffer + 2, &thref);
break;
case 'E':
/* Print exception info */
kgdb_printexceptioninfo(exVector, err_code,
- remcomOutBuffer);
+ remcom_out_buffer);
break;
case 'T':
- if (memcmp(remcomInBuffer+1,
+ if (memcmp(remcom_in_buffer+1,
"ThreadExtraInfo,",16))
{
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
}
threadid = 0;
- ptr = remcomInBuffer+17;
- kgdb_hexToLong(&ptr, &threadid);
+ ptr = remcom_in_buffer+17;
+ kgdb_hex2long(&ptr, &threadid);
if (!getthread(linux_regs, threadid)) {
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
}
if (threadid < pid_max) {
kgdb_mem2hex(getthread(linux_regs,
threadid)->comm,
- remcomOutBuffer, 16);
+ remcom_out_buffer, 16);
} else if (threadid >= pid_max +
num_online_cpus()) {
kgdb_shadowinfo(linux_regs,
- remcomOutBuffer,
+ remcom_out_buffer,
threadid - pid_max -
num_online_cpus());
} else {
sprintf(tmpstr, "Shadow task %d"
" for pid 0",
(int)(threadid - pid_max));
- kgdb_mem2hex(tmpstr, remcomOutBuffer,
+ kgdb_mem2hex(tmpstr, remcom_out_buffer,
strlen(tmpstr));
}
break;
@@ -927,60 +928,60 @@
/* task related */
case 'H':
- switch (remcomInBuffer[1]) {
+ switch (remcom_in_buffer[1]) {
case 'g':
- ptr = &remcomInBuffer[2];
- kgdb_hexToLong(&ptr, &threadid);
+ ptr = &remcom_in_buffer[2];
+ kgdb_hex2long(&ptr, &threadid);
thread = getthread(linux_regs, threadid);
if (!thread && threadid > 0) {
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
}
kgdb_usethread = thread;
kgdb_usethreadid = threadid;
- ok_packet(remcomOutBuffer);
+ ok_packet(remcom_out_buffer);
break;
case 'c':
atomic_set(&kgdb_killed_or_detached, 0);
- ptr = &remcomInBuffer[2];
- kgdb_hexToLong(&ptr, &threadid);
+ ptr = &remcom_in_buffer[2];
+ kgdb_hex2long(&ptr, &threadid);
if (!threadid) {
kgdb_contthread = 0;
} else {
thread = getthread(linux_regs, threadid);
if (!thread && threadid > 0) {
- error_packet(remcomOutBuffer,
+ error_packet(remcom_out_buffer,
-EINVAL);
break;
}
kgdb_contthread = thread;
}
- ok_packet(remcomOutBuffer);
+ ok_packet(remcom_out_buffer);
break;
}
break;
/* Query thread status */
case 'T':
- ptr = &remcomInBuffer[1];
- kgdb_hexToLong(&ptr, &threadid);
+ ptr = &remcom_in_buffer[1];
+ kgdb_hex2long(&ptr, &threadid);
thread = getthread(linux_regs, threadid);
if (thread)
- ok_packet(remcomOutBuffer);
+ ok_packet(remcom_out_buffer);
else
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
case 'z':
case 'Z':
- ptr = &remcomInBuffer[2];
+ ptr = &remcom_in_buffer[2];
if (*(ptr++) != ',') {
- error_packet(remcomOutBuffer, -EINVAL);
+ error_packet(remcom_out_buffer, -EINVAL);
break;
}
- kgdb_hexToLong(&ptr, &addr);
+ kgdb_hex2long(&ptr, &addr);
- bpt_type = remcomInBuffer[1];
+ bpt_type = remcom_in_buffer[1];
if (bpt_type != bp_breakpoint) {
if (bpt_type == bp_hardware_breakpoint &&
!(kgdb_ops->flags & KGDB_HW_BREAKPOINT))
@@ -993,7 +994,7 @@
break;
}
- if (remcomInBuffer[0] == 'Z') {
+ if (remcom_in_buffer[0] == 'Z') {
if (bpt_type == bp_breakpoint)
error = set_break(addr);
else
@@ -1009,27 +1010,27 @@
}
if (error == 0)
- ok_packet(remcomOutBuffer);
+ ok_packet(remcom_out_buffer);
else
- error_packet(remcomOutBuffer, error);
+ error_packet(remcom_out_buffer, error);
break;
default:
default_handle:
error = kgdb_arch_handle_exception(exVector, signo,
- err_code, remcomInBuffer,
- remcomOutBuffer, linux_regs);
+ err_code, remcom_in_buffer,
+ remcom_out_buffer, linux_regs);
- if(error >= 0 || remcomInBuffer[0] == 'D' ||
- remcomInBuffer[0] == 'k')
+ if(error >= 0 || remcom_in_buffer[0] == 'D' ||
+ remcom_in_buffer[0] == 'k')
goto kgdb_exit;
} /* switch */
/* reply to the request */
- putpacket(remcomOutBuffer, 0);
+ put_packet(remcom_out_buffer, 0);
}
kgdb_exit:
@@ -1189,7 +1190,7 @@
*bufptr = '\0';
s += wcount;
- putpacket(kgdbconbuf, 1);
+ put_packet(kgdbconbuf, 1);
}
local_irq_restore(flags);
next prev parent reply other threads:[~2004-02-22 21:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-22 16:04 Pavel Machek
2004-02-22 20:22 ` Sam Ravnborg
2004-02-22 19:54 ` Bartlomiej Zolnierkiewicz
2004-02-22 19:54 ` Pavel Machek
2004-02-22 21:15 ` Sam Ravnborg
2004-02-22 21:02 ` Pavel Machek [this message]
2004-02-23 10:24 ` Amit S. Kale
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040222210224.GB16779@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=akale@users.sourceforge.net \
--cc=akpm@zip.com.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®