From: Mikael Pettersson <mikpe@csd.uu.se>
To: gf435@gmx.net, linux-kernel@vger.kernel.org
Subject: Re: GigaBit Netdriver instability
Date: Tue, 2 Mar 2004 02:50:22 +0100 (MET) [thread overview]
Message-ID: <200403020150.i221oMpr024937@harpo.it.uu.se> (raw)
On Sat, 28 Feb 2004 18:57:32 +0100, Otto Meier wrote:
>I try to run a Dlink DGE-550T 64bit PCI Gigabit Card
>with the driver dl2k and kernel 2.6.3-mm4. on a dual
>athlon-MP MSI 6501 board.
>
>With some heavier load on the net (transfering 2 1-Gbyte files to 2
>different clients on the net
>2 100Mbit connections)
>
>I get following messages in syslog
>
>APIC error on CPU0: 02(02)
>Feb 28 16:23:33 gate2 kernel: APIC error on CPU1: 02(02)
>Feb 28 16:23:38 gate2 kernel: eth0: Transmit error, TxStatus 400270f,
>FrameId 67108864
>
>after some several of these messages the network connection stops.
02 is "receive checksum error". Your mainboard is
corrupting messages on the APIC bus. That's extremely bad.
Many people have had problems with older dual-Athlon boards.
Ensure that the power supply and cooling solution are adequate,
and that the memory modules are certified.
Failing that, try the "noapic" kernel parameter.
next reply other threads:[~2004-03-02 1:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-02 1:50 Mikael Pettersson [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-02-28 17:57 Otto Meier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200403020150.i221oMpr024937@harpo.it.uu.se \
--to=mikpe@csd.uu.se \
--cc=gf435@gmx.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®