mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: mikem@beardog.cca.cpqcorp.net
To: apkm@osdl.org
Cc: linux-kernel@vger.kernel.org
Subject: cciss per device queue patch for 2.6.4
Date: Mon, 8 Mar 2004 13:49:57 -0600	[thread overview]
Message-ID: <20040308194957.GA18954@beardog.cca.cpqcorp.net> (raw)

This patch adds support for per logical device queues for the HP cciss driver. It fixes an Oops when multiple logical drives are configured on the same controller. It may also help performance but has not been benchmarked as yet. Please consider this for inclusion. It has built & tested against 2.6.3 & 2.6.4-rc2.

Thanks,
mikem
-------------------------------------------------------------------------------
diff -burN lx264.test/drivers/block/cciss.c lx264/drivers/block/cciss.c
--- lx264.test/drivers/block/cciss.c	2004-03-04 13:38:49.000000000 -0600
+++ lx264/drivers/block/cciss.c	2004-03-04 11:45:56.000000000 -0600
@@ -991,7 +991,7 @@
 		drive_info_struct *drv = &(host->drv[i]);
 		if (!drv->nr_blocks)
 			continue;
-		blk_queue_hardsect_size(host->queue, drv->block_size);
+		blk_queue_hardsect_size(drv->queue, drv->block_size);
 		set_capacity(disk, drv->nr_blocks);
 		add_disk(disk);
 	}
@@ -2016,7 +2016,7 @@
 	CommandList_struct *c;
 	unsigned long flags;
 	__u32 a, a1;
-
+	int j;
 
 	/* Is this interrupt for us? */
 	if (( h->access.intr_pending(h) == 0) || (h->interrupts_enabled == 0))
@@ -2062,11 +2062,18 @@
 			}
 		}
 	}
-
 	/*
 	 * See if we can queue up some more IO
+	 * check every disk that exists on this controller 
+	 * and start it's IO
 	 */
-	blk_start_queue(h->queue);
+	for(j=0;j < NWD; j++) {
+		/* make sure the disk has been added and the drive is real */
+		/* because this can be called from the middle of init_one */
+		if(!(h->gendisk[j]->queue) || !(h->drv[j].nr_blocks) )
+			continue;
+		blk_start_queue(h->gendisk[j]->queue);
+	}
 	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 	return IRQ_HANDLED;
 }
@@ -2513,7 +2520,6 @@
 static int __devinit cciss_init_one(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
-	request_queue_t *q;
 	int i;
 	int j;
 
@@ -2571,13 +2577,6 @@
 	}
 
 	spin_lock_init(&hba[i]->lock);
-	q = blk_init_queue(do_cciss_request, &hba[i]->lock);
-	if (!q)
-		goto clean4;
-
-	q->backing_dev_info.ra_pages = READ_AHEAD;
-	hba[i]->queue = q;
-	q->queuedata = hba[i];
 
 	/* Initialize the pdev driver private data. 
 		have it point to hba[i].  */
@@ -2599,6 +2598,19 @@
 
 	cciss_procinit(i);
 
+	for(j=0; j<NWD; j++) {
+		drive_info_struct *drv = &(hba[i]->drv[j]);
+		struct gendisk *disk = hba[i]->gendisk[j];
+		request_queue_t *q;
+
+	        q = blk_init_queue(do_cciss_request, &hba[i]->lock);
+		if (!q) {
+			printk(KERN_ERR 
+			   "cciss:  unable to allocate queue for disk %d\n",
+			   j);
+			break;
+		}
+		drv->queue = q;
 	blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
 
 	/* This is a hardware imposed limit. */
@@ -2609,21 +2621,17 @@
 
 	blk_queue_max_sectors(q, 512);
 
-
-	for(j=0; j<NWD; j++) {
-		drive_info_struct *drv = &(hba[i]->drv[j]);
-		struct gendisk *disk = hba[i]->gendisk[j];
-
+		q->queuedata = hba[i];
 		sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
 		sprintf(disk->devfs_name, "cciss/host%d/target%d", i, j);
 		disk->major = COMPAQ_CISS_MAJOR + i;
 		disk->first_minor = j << NWD_SHIFT;
 		disk->fops = &cciss_fops;
-		disk->queue = hba[i]->queue;
+		disk->queue = q;
 		disk->private_data = drv;
 		if( !(drv->nr_blocks))
 			continue;
-		blk_queue_hardsect_size(hba[i]->queue, drv->block_size);
+		blk_queue_hardsect_size(q, drv->block_size);
 		set_capacity(disk, drv->nr_blocks);
 		add_disk(disk);
 	}
@@ -2693,9 +2701,9 @@
 		struct gendisk *disk = hba[i]->gendisk[j];
 		if (disk->flags & GENHD_FL_UP)
 			del_gendisk(disk);
+			blk_cleanup_queue(disk->queue);
 	}
 
-	blk_cleanup_queue(hba[i]->queue);
 	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
 			    hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
 	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct),
diff -burN lx264.test/drivers/block/cciss.h lx264/drivers/block/cciss.h
--- lx264.test/drivers/block/cciss.h	2004-02-17 21:57:11.000000000 -0600
+++ lx264/drivers/block/cciss.h	2004-03-04 11:45:56.000000000 -0600
@@ -27,6 +27,7 @@
 {
  	__u32   LunID;	
 	int 	usage_count;
+	struct request_queue *queue;
 	sector_t nr_blocks;
 	int	block_size;
 	int 	heads;
@@ -69,7 +70,6 @@
 	unsigned int maxQsinceinit;
 	unsigned int maxSG;
 	spinlock_t lock;
-	struct request_queue *queue;
 
 	//* pointers to command and error info pool */ 
 	CommandList_struct 	*cmd_pool;
@@ -252,7 +252,7 @@
 	struct access_method *access;
 };
 
-#define CCISS_LOCK(i)	(hba[i]->queue->queue_lock)
+#define CCISS_LOCK(i)	(&(hba[i]->lock))
 
 #endif /* CCISS_H */
------------------------------------------------------------------------------ 

             reply	other threads:[~2004-03-08 19:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-03-08 19:49 mikem [this message]
2004-03-08 19:46 ` Jens Axboe
2004-03-08 20:35 Miller, Mike (OS Dev)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040308194957.GA18954@beardog.cca.cpqcorp.net \
    --to=mikem@beardog.cca.cpqcorp.net \
    --cc=apkm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mike.miller@hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®